OpenWrt Forum Archive

Topic: [SOLVED] TL-WDR4300 bricked by trunk build (2013.03.19)

The content of this topic has been archived on 2 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

I was running 10.09-rc1 and have give the latest trunk a try.
After the image upload everything seemed to be working fine (apart of some minor GUI glitches) until I had to reboot the box (power outage).
Now I sadly stare at a black brick with the system led blinking.
Any idea whether this is somehow fixable?

Update: read below

(Last edited by uqbar on 20 Mar 2013, 17:56)

Failsafe mode worked fine. But the build is unstable. It made the box non working again.
I advise against this build at least for WDR4300.
I'm reverting back to my 10.09-rc1.

(Last edited by uqbar on 20 Mar 2013, 17:27)

Did you mean 12.09-rc1 aka Attitude Adjustment ?

The provided 12.09rc1 images work fine on my WDR4300 v1.3.

(Last edited by sgn on 22 Mar 2013, 02:51)

The discussion might have continued from here.