hello dear i have make this command,

cd /tmp/
wget http://downloads.openwrt.org/backfire/1 … uashfs.trx # The file must be the trx file.
mtd write /tmp/openwrt-brcm47xx-squashfs.trx linux && reboot

have started wrt54gl connected to modem router by lan, and have recevied ip 192.168.1.20

i have login by http, and have setting new password, and save click,

my router not have access by lan http is possible this ?

i have problem for reanimate this
please help me,

please excuse for my english

(Last edited by cento50 on 17 Mar 2013, 15:08)

Can you ping the router?
Can you telnet/ssh into your router?

ho yes dear i have connection direct to network pc, and have 192.168.1.1

i have like this firmware is many complicated for my use and have test, my hardware if click menu down right screen html save or save apply , this function look and blink led power...

i have interess for reinstall original firmware or other, but I've read that you can install only compatible with openwrt

do you help me in this operation ?
thank'you    nice for reply my post

This is the OEM firmware:
http://downloads.linksys.com/downloads/ … 16.002.bin

Don't know if you can go back.
Anyone else have info?

I used the following procedures to get from OpenWRT to DD-WRT on the WRT54GL 1.1 (every time):

1. Download a copy of PuTTY. SSH into the router suing PuTTY using the router IP address and login to OpenWRT.
2. Execute the following commands:

wget http://www.dd-wrt.com/dd-wrtv2/download … i_asus.trx -O /tmp/firmware.trx

mtd -r write /tmp/firmware.trx linux
3. Allow the router to reboot.

hoo yes dear i have make this...
your pleasure not write... direct by http..

(Last edited by cento50 on 17 Mar 2013, 21:49)