Hello!
           I have a EOC2611P access point from Senao, the green led lights are on but i can't get access to the GUI anymore, here is a screenshot of a few tests i made, any suggestions/tip i could try? Thank you

Sorry my first post, i see there is no option to upload images here sad .....

I will try to copy the information of the 2 dos screens:

192.168.1.1 - PuTTY
^C== Executing boot script in 0.210 seconds - enter ^C to abort
^C
RedBoot> fis list
^C
RedBoot> Name            FLASH addr         Mem addr           Length            Entry point
RedBoot                     0xA8000000         0xA8000000      0x00030000       0x00000000
FIS directory              0xA87E0000         0xA87E0000      0x0000F000       0x00000000
RedBoot config           0xA87EF000         0xA87E0000      0x00001000       0x00000000
RedBoot>


and this is the second test:

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\User>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1:  bytes=32  time=8ms  TTL=64
Reply from 192.168.1.1:  bytes=32  time=11ms  TTL=64
Reply from 192.168.1.1:  bytes=32  time<1ms  TTL=64
Reply from 192.168.1.1:  bytes=32  time=9ms  TTL=64

Ping statistics for 192.168.1.1:
      Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
       Minimum = 0ms, Maximum = 11ms, Average = 7ms

C:\Users\User>_