Guten Tag zusammen,

ich möchte gerne eine builroot Umgebung für das nagelneue Netgear Modell WNDR3700v4 zusammenbasteln.

ich habe mich auf die boot console connected (jtag - rs232 - usb Adapter) und die Ausgabe geloggt.

Ein  grep 'AR'  bringt das zum Vorschein:

Booting Atheros AR934x  (Der wird laut ToH unterstützt - Qualcom)

..oder die Adressierung des Speicherbereiches:

Atheros on-chip NAND FLash Controller Driver, Version 0.1 (c) 2010 Atheros Communications, Ltd.
Ath Nand ID[878555a0]: 2c:f1:80:95:02
ONFI MICRON      MT29F1G08ABADAWP   
Micron NAND 128MiB 3,3V 8-bit [128MB]
12 cmdlinepart partitions found on MTD device ath-nand
Creating 12 MTD partitions on "ath-nand":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000080000 : "u-boot-env"
0x000000080000-0x0000000c0000 : "caldata"
0x0000000c0000-0x000000140000 : "pot"
0x000000140000-0x000000340000 : "language"
0x000000340000-0x0000003c0000 : "config"
0x0000003c0000-0x0000006c0000 : "traffic_meter"
0x0000006c0000-0x0000007e0000 : "kernel"
0x0000007e0000-0x000001fc0000 : "rootfs"

Was ist denn nun der nächste Schritt ?

Auf der Kiste läuft bereits openwrt - meine Anfragen an Netgear, die benötigte tool-chain / builroot der Community zur Verfügung zu stellen blieb bisher ergebnislos.

sunshine !