OpenWrt Forum Archive

Topic: RAMIPS RT305X switch issue

The content of this topic has been archived on 25 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
Shogo
2 Nov 2012, 15:46

Hope this will help the devs find a fix.
I have a couple of Argus ATP-52B routers that i keep testing for some time now.

The issue :
The switch does not work at all ( the lights are comming on but there no traffic going in or out )
The lan ports do not lease an IP and even i set up a static ip on the PC i will still not be able to touch the router.
On the WAN is the same ( either way static or dynamic IP )

What works :

Last build that works and i have tested is 33300

What does not work :

From 333001 up to the up to date AA2

Narrow down the problem to the changes made in 33301 :

https://dev.openwrt.org/changeset?sfp_e … 3300%40%2F

Maybe someone with a great nose will find the issue.
I am most willing to test the patch or do the changes myself to my trunk.
Do someone experienceing the same issue on other RT305X chipsets ?


Regards,
Shogo

(Last edited by Shogo on 2 Nov 2012, 15:51)

Post #2
123serge123
4 Nov 2012, 17:02

Did you configure switch in your /etc/config/network? It's better to show configs.

Post #3
Shogo
9 Nov 2012, 11:15

Hi Serge,

No i did not modify the network config.
It is identical in both build ( working and not working ).
Do you have any recommendations on how to do that?
I have seen in the change log ( like posted above ) that some vlan things have been modify.

Cheers
Shogo

Post #4
Shogo
9 Nov 2012, 11:53

Working network config :

BusyBox v1.19.4 (2012-06-25 11:56:58 BST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
ATTITUDE ADJUSTMENT (Bleeding Edge, r32499)
-----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
-----------------------------------------------------
root@OpenWrt:/# cat /etc/config/network

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config interface 'lan'
        option ifname 'eth0.1'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option macaddr '00:25:22:2f:11:88'

config interface 'wan'
        option ifname 'eth0.2'
        option proto 'dhcp'
        option macaddr '00:25:22:2f:11:89'

root@OpenWrt:/#


Latest build that works

BusyBox v1.19.4 (2012-10-26 15:43:45 BST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
ATTITUDE ADJUSTMENT (Bleeding Edge, r33300)
-----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
-----------------------------------------------------
root@OpenWrt:/# cat /etc/config/network

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config interface 'lan'
        option ifname 'eth0.1'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option macaddr '00:25:22:2f:11:88'

config interface 'wan'
        option ifname 'eth0.2'
        option proto 'dhcp'
        option macaddr '00:25:22:2f:11:89'

root@OpenWrt:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 00:25:22:2F:11:88
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2 errors:0 dropped:1 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:381 (381.0 B)  TX bytes:402 (402.0 B)

eth0      Link encap:Ethernet  HWaddr 00:11:22:33:44:55
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:732 errors:0 dropped:0 overruns:0 frame:0
          TX packets:63 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:95865 (93.6 KiB)  TX bytes:6890 (6.7 KiB)
          Interrupt:5

eth0.1    Link encap:Ethernet  HWaddr 00:11:22:33:44:55
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:381 (381.0 B)  TX bytes:402 (402.0 B)

eth0.2    Link encap:Ethernet  HWaddr 00:25:22:2F:11:89
          inet addr:10.0.1.30  Bcast:10.0.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:730 errors:0 dropped:21 overruns:0 frame:0
          TX packets:62 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:82308 (80.3 KiB)  TX bytes:6092 (5.9 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1456 (1.4 KiB)  TX bytes:1456 (1.4 KiB)

root@OpenWrt:/#


An the build that don't work :


BusyBox v1.19.4 (2012-10-29 16:56:28 GMT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
ATTITUDE ADJUSTMENT (Bleeding Edge, r33301)
-----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
-----------------------------------------------------
root@(none):/# cat /etc/config/network

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config interface 'lan'
        option ifname 'eth0.1'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option macaddr '00:25:22:2f:11:88'

config interface 'wan'
        option ifname 'eth0.2'
        option proto 'dhcp'
        option macaddr '00:25:22:2f:11:89'

root@OpenWrt:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 00:25:22:2F:11:88
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:402 (402.0 B)

eth0      Link encap:Ethernet  HWaddr 00:11:22:33:44:55
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:23 errors:0 dropped:2 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3071 (2.9 KiB)  TX bytes:1624 (1.5 KiB)
          Interrupt:5

eth0.1    Link encap:Ethernet  HWaddr 00:11:22:33:44:55
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:402 (402.0 B)

eth0.2    Link encap:Ethernet  HWaddr 00:25:22:2F:11:89
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:1206 (1.1 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@OpenWrt:/#

and this ongoing until the latest build from yesterday.

Any suggestions ?

Cheers
Shogo

Post #5
Shogo
9 Nov 2012, 11:54

Also board info :

root@OpenWrt:/# cat /proc/cpuinfo
system type             : Ralink RT3052 id:1 rev:3
machine                 : Argus ATP-52B
processor               : 0
cpu model               : MIPS 24KEc V4.12
BogoMIPS                : 255.59
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
ASEs implemented        : mips16 dsp
shadow register sets    : 1
kscratch registers      : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

Post #6
123serge123
9 Nov 2012, 14:00

As I see there is no switch config in your network file. You may add it by yourself

config switch
      option name 'rt305x'
      option reset 1
      option enable_vlan 1

config switch_vlan
      option device 'rt305x'
      option vlan 1
      option ports '1 2 3 4 6t'

config switch_vlan
      option device 'rt305x'
      option vlan 2
      option ports '0 6t'

and reboot.
Or just reconfigure all from scratch:

firstboot
reboot

Correct network file will be autocreated after reboot but your other changes will be lost.

Post #7
Shogo
9 Nov 2012, 14:11

Fantastic!

That worked perfect!
If I manually configure the vlans on the switch it works perfect.

I also tried the firstboot but it doesn’t generate the correct config file after the reboot.

Maybe a bug?

Thank you so much for your help, is there anything else that i can test to see if it will generate the correct network config so we can submit a bug?

Thanks again,
Shogo

The discussion might have continued from here.