OpenWrt Forum Archive

Topic: WDS on TP-Link WR741ND routers

The content of this topic has been archived on 23 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi!

I have two TP-Link WR741ND routers, and I've put Openwrt on them. How do I get them to speak together over WDS? I'm just a beginner with OpenWrt. It says something about them being atheros, but I don't know what that means.. http://wiki.openwrt.org/doc/recipes/atheroswds

I only know how to use the web interface, and I have put this on both of them:
http://imgur.com/UcEh8

One of them is 192.168.1.1, and the other one 192.168.1.2

What else should I do?

Janko Mihelic

One of them must be in client wds mode.

I forgot to mention that, I already put one in client mode.

One of them is also connected to the outside router that has internet, it's connected to WAN.

Where do I tell them "THIS is the router I want you to connect to, and this is it's password".

The discussion might have continued from here.