1 (edited by sin 2012-04-26 01:36:57)

Topic: Firmware for MR11u V2.0

As you know , the hardware version of new MR11U has been updated to V2.0, making it impossible to flash openwrt directly via web gui.  Cosmetically, the new version comes with no QSS and RESET buttons, and also gone is the annoying USB port cover. but i guess it basically has the same hardware inside as the old one.so i took a guess at its firmware header and modified it accordingly. it turned out i'm right. it works perfectly with the openwrt firmware for V1.1 after fooling it with a modified firmware. for anyone interested, you can download it from here http://115.com/file/an0gpxcg# mr11uV2-31201.7z

this firmware has most of common features built in, including 3G,blockmount, USB-storage, FTP server, DDNS and webcam.

Re: Firmware for MR11u V2.0

Thanks ! There is no luci web interface ? what 's the log in account and password ?

Re: Firmware for MR11u V2.0

bearfoot wrote:

Thanks ! There is no luci web interface ? what 's the log in account and password ?

it has luci built in. everything is default with no password set

Re: Firmware for MR11u V2.0

hi sin,

could you post the changes you made to the header, so that other people can build their own firmware, too. And more important,  that the developers can add the changes to the openwrt-sources to support V2.
Please!

Re: Firmware for MR11u V2.0

i just change the header so the factory firmware allows openwrt to be flashed.just need to change the version number from 00110101 to 00110102.

6 (edited by ron 2012-04-27 11:49:20)

Re: Firmware for MR11u V2.0

I have generated both v1 and v2 for MR11U using the following method.
Prerequisite: You have openwrt root build system installed

Edit the following make file located in the trunk source tree.

./target/linux/ar71xx/image/Makefile

search for MR11U and you will find the following line

tlmr11u_cmdline=board=TL-MR11U console=ttyATH0,115200
define Image/Build/Profile/TLMR11U
        $(call Image/Build/Template/$(fs_64kraw)/$(1),TPLINK-LZMA,tl-mr11u-v1,$(tlmr11u_cmdline),0x00110101,1,4Mlzma)
endef

now copy the $(call Image...  line and change the hardware ID and base name, so it looks like as follows;

tlmr11u_cmdline=board=TL-MR11U console=ttyATH0,115200
define Image/Build/Profile/TLMR11U
        $(call Image/Build/Template/$(fs_64kraw)/$(1),TPLINK-LZMA,tl-mr11u-v1,$(tlmr11u_cmdline),0x00110101,1,4Mlzma)
        $(call Image/Build/Template/$(fs_64kraw)/$(1),TPLINK-LZMA,tl-mr11u-v2,$(tlmr11u_cmdline),0x00110102,1,4Mlzma)
endef

Notice I have changed the Hardware ID to 0x00110102 and changed the base name to tl-mr11u-v2
I have verified that it will generate two versions with different headers. So whenever you build v1, v2 will be built automatically. I have assumed v2 is exactly the same (except it misses two buttons). I dont know if the v2 reset button uses the same mapping as v1 reset button, but please post and let me know.

Save the Makefile and Run the make command from trunk root to build the firmware.

Note: I have not tested the output v2 firmware, but it should burn since I have changed the hardware id.

Re: Firmware for MR11u V2.0

Thanks sin and ron! I will try it when my mr11u arrives.

Re: Firmware for MR11u V2.0

sin wrote:

As you know , the hardware version of new MR11U has been updated to V2.0, making it impossible to flash openwrt directly via web gui.  Cosmetically, the new version comes with no QSS and RESET buttons, and also gone is the annoying USB port cover. but i guess it basically has the same hardware inside as the old one.so i took a guess at its firmware header and modified it accordingly. it turned out i'm right. it works perfectly with the openwrt firmware for V1.1 after fooling it with a modified firmware. for anyone interested, you can download it from here http://115.com/file/an0gpxcg# mr11uV2-31201.7z

this firmware has most of common features built in, including 3G,blockmount, USB-storage, FTP server, DDNS and webcam.

chmod +x /etc/init.d/mjpg-streamer

Re: Firmware for MR11u V2.0

Anyone please help me...! i would like to restore back the MR11u V2 firmware, because now i have install mr11uV2-31201 already. I cant find any original link for MR11u V2 firmware.

Re: Firmware for MR11u V2.0

Help!  I can't read enough Chinese to get this file - the 115.com website wants me to log in but I have no idea how to create an account.

Re: Firmware for MR11u V2.0

Hi,
I can't download the file, google translate translated the following sentence from the site
"Unbound cell phone ban the mass sharing features, please contact the resources to obtain resources" with a yellow exlamation sign.
any suggestions? can anyone re-upload the file please?

thanks

Re: Firmware for MR11u V2.0

I reuploaded the firmware from the chinese site . get it here: http://uploaded.net/file/2tsiskq1

Re: Firmware for MR11u V2.0

Where can I find out more (in English) about how this software build is configured?  After flashing I was able to connect to the "openwrt" WLAN and access luci at 192.168.1.1.  However, when I rebooted the MR11U with it connected to my broadband router ti appears to have come up in bridging mode - my laptop now has 10.0.0.18 for its IP address and the MR11U is nowhere to be seen.

Re: Firmware for MR11u V2.0

sin wrote:

As you know , the hardware version of new MR11U has been updated to V2.0, making it impossible to flash openwrt directly via web gui.  Cosmetically, the new version comes with no QSS and RESET buttons, and also gone is the annoying USB port cover. but i guess it basically has the same hardware inside as the old one.so i took a guess at its firmware header and modified it accordingly. it turned out i'm right. it works perfectly with the openwrt firmware for V1.1 after fooling it with a modified firmware. for anyone interested, you can download it from here http://115.com/file/an0gpxcg# mr11uV2-31201.7z

this firmware has most of common features built in, including 3G,blockmount, USB-storage, FTP server, DDNS and webcam.

Hi,

is this procedure meant for upgrading MR11U v2 firmware  to MR3040's firmware? Please let me know, i want to upgrade my MR11u V2 to MR3040's english firmware.

Thanks in advance,

regards,
Ravi Nalla

15 (edited by johndoe 2012-10-08 01:58:39)

Re: Firmware for MR11u V2.0

GUIDE. HOW TO FLASH OEM TL-MR3040 FIRMWARE

Please give me some time to test how it will work, otherwise you are flashing on your own risk

Thanks to Sin for posting firmware file and Lcdx for reupload it to english website.

I have TL_MR11U v2 and was able to flash it to usual TL-MR3040 firmware. Below a short instruction. Files available by link below.
1. Flash from Chinese firmware to OpenWRT using 1st post manual.
2. Login to your router and change root password to enable SSH.
3. Run webserver on your PC and share TL-MR3040 firmware. (Run HFS from archive, Menu - Add files - and choose TL-MR3040 firmware. Copy http adress from string in program )
4. Run putty. Connect to your router by entering router IP adress - default 192.168.1.1 choose SSH, default port is 22. and press Open
5. Login as root. Enter your password.
6. Enter commands "cd /tmp"
7. "wget http://YOUR_PC_IP/FIRMWARE_NAME.bin" (from HFS)
8. "mtd -r write /tmp/FIRMWARE_NAME.bin firmware"
9. Wait a little. Router will reboot and you will be on stock MR3040 firmware. PLEASE NOTE. In MR3040 firmware dafault IP adress is 192.168.0.1



http://depositfiles.com/files/m2vl0lhnw

Re: Firmware for MR11u V2.0

johndoe wrote:

GUIDE. HOW TO FLASH OEM TL-MR3040 FIRMWARE

Thank you! Excellent guide! I flashed MR3040 firmware.
But now I can try openwrt again. But I can not flash it. Web-interface show error message. I use firmware from 1st post. How can I flash openwrt?

Re: Firmware for MR11u V2.0

MAYBE using mr3040 openwrt "factory" image??
It's just a guess, not tested and i will not be responsable xD

Re: Firmware for MR11u V2.0

For some reason after flashing on mr3040 openwrt factory I can not get access to web-interface. I just can access to telnet and ssh.
Just information.

Re: Firmware for MR11u V2.0

izumeroot wrote:

For some reason after flashing on mr3040 openwrt factory I can not get access to web-interface. I just can access to telnet and ssh.
Just information.

Have you ever read openwrt (document)wiki ?

Openwrt NOT include WebUI (by default)
You have to download and install it separately after you have config your device to have internet access.
Or built your own image that pre-installed webui, or use Attitude Adjustment

Re: Firmware for MR11u V2.0

Oh.. Sorry. Thanks

Re: Firmware for MR11u V2.0

Strongly recommended AA images, not trunk!

Re: Firmware for MR11u V2.0

Hi. I just received a TP-MR11U and want to flash it with OpenWRT/MR3040 to get English UI. However, I cannot seem to download the modified firmware from both sites. The uploaded.net site keeps saying that no more downloads available and the 115.com keeps popping up with a dialog box to go to the VIP site.

Can anyone direct me to another location or send me the file?

Thanks.

23 (edited by guilhem 2013-03-19 11:00:32)

Re: Firmware for MR11u V2.0

commit #36038 will add support for TP-MR11U v2 smile

https://dev.openwrt.org/changeset/36038/trunk

24 (edited by ron 2013-03-20 22:16:02)

Re: Firmware for MR11u V2.0

wow, it  took a whole year smile

Re: Firmware for MR11u V2.0

guilhem wrote:

commit #36038 will add support for TP-MR11U v2 smile

https://dev.openwrt.org/changeset/36038/trunk

Tell me how to download and install?
Thank you.