Hey Guys, I started with Openwrt yesterday and I'm having a few n00b moments.

I've installed the firmware into the dir-300 and it shows as:
ATTITUDE ADJUSTMENT (bleeding edge, r31258)

But, I cannot get Luci to install, so I ready that there is a package you can upgrade to that already has it installed and that's where I'm stuck. I ssh in and then try the update, here is what I get:

root@OpenWrt:/tmp# wget http://downloads.openwrt.org/backfire/1 … uashfs.img
Connecting to downloads.openwrt.org (78.24.191.177:80)
openwrt-atheros-comb 100% |**********************************************************************************************|  2752k  0:00:00 ETA
root@OpenWrt:/tmp# sysupgrade /tmp/openwrt-atheros-combined.squashfs.img
Saving config files...
Sending TERM to remaining processes ... dnsmasq ntpd syslogd klogd hotplug2
Sending KILL to remaining processes ...
Switching to ramdisk...
Performing system upgrade...
ash: arithmetic syntax error
@OpenWrt:/tmp#

I'm hoping someone can help me out.
Thanks in advance.
Gib

bump

................ PLEASE do NOT bump...its just generating noise

might be problem regarding info found in the forum @ https://forum.openwrt.org/viewtopic.php … 19&p=2

"..... the snapshots were recently changed to be debug builds (to be better able to debug problems found by users of the snapshot builds),
which pushed the kernel size over  the  limit  for some images
If you need them now, I'd suggest building it yourself. It isn't hard, just a bit time consuming (depending on the speed of your machine wink)

regards
3zl

Is there anyway I can get a slightly older version of the file, that does work?
Where do I find the instructions for building it myself? Sorry, n00b.

Of coz, wiki, http://wiki.openwrt.org/doc/start
look to the Building section.