I try to flash my WZR-HP-G300NH2 following this link:
http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300nh2
I used this image:
http://downloads.openwrt.org/snapshots/ … s-tftp.bin
And this procedure to flash:
Migrate from DD-WRT to OpenWrt
Enable SSH on the router
Login to the router via SSH
Change directory to /tmp and download OpenWrt firmware image file:
cd /tmp
wget http://downloads.openwrt.org/snapshots/ … s-tftp.bin
Overwrite current firmware with the downloaded one:
mtd -r write openwrt-ar71xx-generic-wzr-hp-g300nh2-squashfs-tftp.bin linux
After flashing, the router should go down for a reboot and return running OpenWrt.
And when flash is finished the router restart and I get flashing diag light and I can't access the router.
The red diag light blinks like this: 2 blinks, stop, 2 bliks, stop, ....
Can somebody help me out?
thx in advance