my bullet2hp lost redboot config when kernel or redboot erased what can i do to fix this problem

i lost mac address and no board configration please need help
this massege via serial ttl

+No board configuration found!
Couldn't find valid MAC address for enet0. Using default!
Unknown PHY: 004D:D023
Ethernet eth0: MAC address 00:03:7f:e0:02:bf
IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Ubiquiti Networks certified release, version 0.9.8.06 - built 10:58:08, Dec 23 2008

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: Ubiquiti AR2315/6/7/8 based board
RAM: 0x80000000-0x81000000, [0x80040880-0x80fe1000] available
FLASH: 0xbfc00000 - 0xbfff0000, 64 blocks of 0x00010000 bytes each.

problem video in youtube
http://www.youtube.com/watch?v=WSA15rVbrVw

thanks openwrt

mail :skysat77@yahoo.com

(Last edited by skysat77 on 20 Feb 2012, 18:13)

you need someone's flash dump from 3c0000-400000.

where can i find it thanks for reply mr mbs

normally you need to find someone having a similar router. but maybe you are lucky and the file in that message is of some use for you: https://lists.openwrt.org/pipermail/ope … 14097.html
but also read through this thread to see which parts are dumped in the file: https://lists.openwrt.org/pipermail/ope … 14095.html

i try in this link not work ?? how to set mac address
and config board ???? this is problem thanks mr mbs

(Last edited by skysat77 on 21 Feb 2012, 02:45)

where devloper .. please help me please

maybe one of the developers has your device and can help you out with an image. check IRC irc.freenode.net, channels #openwrt and #openwrt-devel .

link not work mbs idon't know what can i  do ??

(Last edited by skysat77 on 22 Feb 2012, 01:00)

neeed help please need flash dumb file for bullet2hp