Topic: Error 88 on SD-card modded FON 2100

Hi guys!
I'v just added a sd-card to my fon 2100 using the following guide:
http://www.larsen-b.com/Article/262.html
I've been looking all over the interwebs for info about setting it up with kamikaze 8.09 but all has failed.
I just get "mmc0: error -88 whilst initialising SD card" in dmesg".

Does any guru know what it might be?

Thanks in advance!

Re: Error 88 on SD-card modded FON 2100

any reason for sticking to 8.09? 10.03.1 or trunk might be easier to debug.

Re: Error 88 on SD-card modded FON 2100

It works now smile

I really didn't have any reason NOT to upgrade, so I did.
After trying this:
https://forum.openwrt.org/viewtopic.php?pid=112859#p112859
everything works!

All I/O operations take a lot of time, but i guess it's because the driver is bit-banging the spi-gpio bus.

Thank you MBS for making me re-think why I was running kamikaze smile