Hi! I need your help. I'm purchase *#cking china device ZTE ZXDSL 931 WII. Original firmware not working nomally. But this device have many good functions, such as 802,1q, L2 management switch and VDSL2 support up to 100Mbit/s downstream to 60Mbit/s Upstream. Device based on broadcom BCM6368 V3.1 chip. No one of OpenWRT image is not uploading, i'm try to do it from web-inteface and over TFTP. Device wrote "Illegal image"

P.S Sorry about my english

(Last edited by Stealch on 20 Jan 2012, 20:38)

>cat /proc/cpuinfo
system type             : 96368MVWG
processor               : 0
cpu model               : BCM6368 V3.1
BogoMIPS                : 398.95
wait instruction        : no
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
ASEs implemented        :
VCED exceptions         : not available
VCEI exceptions         : not available

> cat /proc/meminfo
MemTotal:        61736 kB
MemFree:         38752 kB
Buffers:          2496 kB
Cached:           8428 kB
SwapCached:          0 kB
Active:           6596 kB
Inactive:         7092 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        2780 kB
Mapped:           1992 kB
Slab:             4988 kB
SReclaimable:      400 kB
SUnreclaim:       4588 kB
PageTables:        304 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     30868 kB
Committed_AS:     5720 kB
VmallocTotal:  1032148 kB
VmallocUsed:      2108 kB
VmallocChunk:  1028932 kB
> cat /proc/interrupts
           CPU0
  7:    3623135         BCM63xx  timer
10:       1773         BCM63xx  brcm_10
21:     854349         BCM63xx  brcm_21
22:          0         BCM63xx  brcm_22
23:          5         BCM63xx  brcm_23
28:          0         BCM63xx  brcm_28
29:          0         BCM63xx  brcm_29
30:          0         BCM63xx  brcm_30
40:    1911051         BCM63xx  brcm_40
42:          0         BCM63xx  brcm_42
43:          0         BCM63xx  brcm_43
48:          0         BCM63xx  brcm_48
49:          0         BCM63xx  brcm_49
50:          0         BCM63xx  brcm_50

ERR:          0

(Last edited by Stealch on 20 Jan 2012, 20:42)

Hi

BCM6368 is not supported yet in OpenWrt, but will be soon. But ...

The internal ADSL and VDSL modem is currently not supported, and likely will not be for a very long time, or maybe never. There are no open source drivers, and the binary drivers do not work on OpenWrt.

Regards
KM

Thanks for reply. Adsl/vdsl function currently no used and maybe don't needed. I'd just like to use 802,1q, wireless, and make stable working device. For now that **cking china device can't up pptp, works only whith pppoe. 802.1q port based control functions needed to me. That router +dlink des3526 both combines level3 network core, which i needed for my small net. Looking forward to your newest firmware for my device. If you have some unstable version with support BCM6368 - please let me know.

With best regards, Stealch

Hi again! After 2 years wating i'm find some your images for Broadcom 63xx, (openwrt-96368MVWG-generic-squashfs-cfe.bin) but no one of this images is install. How i can flash your image to this f***ing china device? Now i try to flash this firmware using recovery mode. Firmware was succes uploaded, flashing, but device halted after reboot. Led's internet and ethernet 1 is on, devise not responsing. If i remove LAN cable from router, led on port is still on...

(Last edited by Stealch on 6 Sep 2016, 23:56)

One more time 2 years passed. In 15.05 Chaos Calmer still have no working firmware for this device. I'm try to compile firmware, trying many times with same result - brick with leds. I have no working kernel config and i have no idea where find defconfig for this router.
Verdict: this device not supported openwrt and i can't do something alone, so topic closed for now.
If somebody success flash openwrt to this device - let me know.

Stealch, try brcm63xx-generic-96368MVNgr-generic-squashfs-cfe.bin instead of 96368MVWG
I have success with openwrt-15.05-brcm63xx-generic-96368MVNgr-generic-squashfs-cfe for Domolink ADSL router with same hardware.
Though wireless support for this hardware isn't very good, only client mode is relatively stable.

(Last edited by kavc on 3 Jan 2017, 00:02)

Finally one more russian on site ) Thanks, i will try. Спасибо, друг! Я уж и не чаял что кто-то еще не избавился от этого роутера, у меня как раз домолинковский девайс за 1 рубль )

Big thanks to kavc. I'm flash brcm63xx-generic-96368MVNgr-generic-squashfs-cfe.bin and my router now work with openwrt firmware. Some bugs are present: leds on ports 1-4 always off, power led is red only and no way to turn off red and turn on green.
Большое спасибо kavc. Я прошил brcm63xx-generic-96368MVNgr-generic-squashfs-cfe.bin и мой роутер наконец-то работает на openwrt. Есть некоторые баги: лампочки на портах 1-4 всегда выключены, лампочка питания всегда красная, без возможности переключения на зеленую.

(Last edited by Stealch on 22 Jan 2017, 06:51)