The content of this topic has been archived on 18 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello everybody!
I have 2 USB-ports on my Asus 500gP v.1
Me and my friend are going to make a small script running at start-up, that will help us to understand, which device is /dev/ttyACM0 and which is /dev/ttyACM1
How can OpenWRT tell us which device do we have on each port?
One of them is 3G modem, another is a controller.
What are your ideas?
I guess it must be simple..)
Thank you for any help in advance!
Hi,
With Hotplug script you can make a link to your device,
Take a look at cp210x example : http://wiki.openwrt.org/doc/techref/hotplug#examples
Regards.
(Last edited by Niii on 11 Dec 2011, 21:18)
Niii, Thanks for idea and a How-To article!
In my case I do not plug in the usb devices. They are always plugged in. I want to determinate the device at start up.
The router will reboot and each time the /dev/ttyACM0 and /dev/ttyACM1 could mix.
Is it possible to use your script at this case?
Kind Regards,
Artem
Sure, it works at boot too 
.
The discussion might have continued from here.