Is it possible to install pakages on a CIFS or NFS shares? I tryed on a CIFS and on NFS...
I used FreeNFS on my Win7 computer as NFS server. On my 741ND router (10.03 backfire RC6) i installed :
root@AirNET:~# opkg list-installed | grep nfs
kmod-fs-nfs - 2.6.32.27-1
kmod-fs-nfs-common - 2.6.32.27-1
nfs-utils - 1.1.6-1
block-mount
block-hotplug[/quote]
and mount using command : mount -t nfs 192.168.1.101:/ /mnt/share -o nolock,hard--------------------------------------
root@AirNET:~# uci show fstab
fstab.automount=global
fstab.automount.from_fstab=1
fstab.automount.anon_mount=1
fstab.autoswap=global
fstab.autoswap.from_fstab=1
fstab.autoswap.anon_swap=0
fstab.@mount[0]=mount
fstab.@mount[0].target=/home
fstab.@mount[0].device=/dev/sda1
fstab.@mount[0].fstype=ext3
fstab.@mount[0].options=rw,sync
fstab.@mount[0].enabled=0
fstab.@mount[0].enabled_fsck=0
fstab.@swap[0]=swap
fstab.@swap[0].device=/dev/sda2
fstab.@swap[0].enabled=0
fstab.@mount[1]=mount
fstab.@mount[1].device=192.168.1.101:/
fstab.@mount[1].enabled_fsck=0
fstab.@mount[1].enabled=1
fstab.@mount[1].target=/mnt/share
fstab.@mount[1].options=rw,hard,intr,nolock--------------------------------------------------------/does't work.., only manual mounting works/
There is df -h output:
root@AirNET:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 1.9M 1.9M 0 100% /rom
tmpfs 14.4M 1.5M 12.9M 10% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 704.0K 676.0K 28.0K 96% /overlay
mini_fo:/overlay 1.9M 1.9M 0 100% /
192.168.1.101:/ 149.0G 145.6G 3.4G 98% /mnt/share
root@AirNET:~#[/quote]
There is result when i try to install some pakage:[/quote]
root@AirNET:~# opkg -d nfs install coova-chilli
Installing coova-chilli (1.2.5-1) to nfs...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc6/ar71xx/packages/coova-chilli_1.2.5-1_ar71xx.ipk.
Installing kmod-tun (2.6.32.27-1) to nfs...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc6/ar71xx/packages/kmod-tun_2.6.32.27-1_ar71xx.ipk.
Installing librt (0.9.30.1-43.29) to nfs...
Downloading http://downloads.openwrt.org/backfire/10.03.1-rc6/ar71xx/packages/librt_0.9.30.1-43.29_ar71xx.ipk.
Configuring kmod-tun.
sh: /mnt/share//usr/lib/opkg/info/kmod-tun.postinst: Permission denied
Configuring librt.
Collected errors:
* extract_archive: Cannot make dir /mnt/share/lib/: File exists.
* extract_archive: Cannot make dir /mnt/share/lib/modules/: File exists.
* extract_archive: Cannot make dir /mnt/share/lib/modules/2.6.32.27/: File exists.
* extract_archive: Cannot make dir /mnt/share/etc/: File exists.
* extract_archive: Cannot make dir /mnt/share/etc/modules.d/: File exists.
* extract_archive: Cannot make dir /mnt/share/lib/: File exists.
* extract_archive: Cannot create symlink from ./lib/librt.so.0 to 'librt-0.9.30.1.so': Operation not supported.
* copy_file: /mnt/share/etc/chilli.conf: Value too large for defined data type.
* file_copy: Failed to copy file /mnt/share/etc/chilli.conf to /mnt/share/etc/chilli.conf-opkg.backup.
* backup_make_backup: Failed to copy /mnt/share/etc/chilli.conf to /mnt/share/etc/chilli.conf-opkg.backup
* opkg_install_cmd: Cannot install package coova-chilli.
* pkg_run_script: postinst script returned status 126.
* opkg_configure: kmod-tun.postinst returned 126.
root@AirNET:~#(Last edited by Vespertilio on 6 Nov 2011, 19:37)
