Hi everyone. I have a SpeedTOuch 7g (branded Fastweb, italian ISP) it's very similar, if not the same, to the BTHUB 1.1, I want to install openwrt on it but I don't know from where to start. From the serial interface I get the log of the booting process and this device doesn't have an standard linux, it uses a system called RTEMS. This is what I get from the serial interface:
Speedtouch initialization sequence started.
BOOTING THE THOMSON RTEMS KERNEL
Starting the kernel @ 0x80010000
Speedtouch initialization sequence started.
\377
[OSI2] File "ZZLZ1.000": Format OSI2 compliant (offset=339, prodid="0", va
id="0").
[SS]
[\177ELF] Loadincall 0x0x80081040(ZZLZ1.000 -t)
----------------------- OSBA -----------------------
version : bcm96348:MOD_BLDBCM96348_OSBA_V1.0.1
active device : /dev/fda1
passive device : /dev/fda2
active path : /active
passiv
path : /dl
passive build i = 2
remounting...
Unmounting /active... success.
Unmounting /dl... success.
Mounting /dev/fda1 as /dl... success.
Mounting /dev/fda2 as /active... success.
---------------- /active/ZZN0AB6.171 START ----------------
[OSI2] File "/active/ZZN0AB6.171": Format OSI2 compliant (offset=339, prodid="0", varid="0").
[SS] Device mounted (prodid="0", prodname="SpeedTouch 7G", varid="0", varname="").
[\177ELF] Loading file "/active/ZZN0AB6.171" ...
c
Speedtouch initializ
tion sequence sFor EMAC1 - select for the ST706/ST780.
For EMAC2 - select for the ST706/ST780.
b6w_init
Calibrating delay loop... 253.13 BogoMIPS
mpi: No Card is in the PCMCIA slot
mpi: device 0x4318 found in PCI slot 1, function 0
wl: srom not det
Anyone can help me to get the job done?.
Thanks.
GinPB
(Last edited by GinPB on 3 Nov 2011, 10:38)