The content of this topic has been archived on 21 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi,
I have a RB433 which has a 3 miniPCI ports. It has no sd or other storage slot. http://routerboard.com/RB433
There are some products for miniPCI: miniPCI SATA storage cards, miniPCI CF cards etc.
Is it supported by openwrt to add such a card and use that additional storage on Routerboard RB433?
Regards,
I'd say that this mainly depends if there is an open source driver of the appropriate chip in the linux kernel. So, if you know which miniPCI card you want to use, it will be possible to check if it is already supported in openwrt or the linux kernel.
The discussion might have continued from here.