Topic: Need Help Porting OpenWRT to Prolink WNR1008 Wireless Router

The content of this topic has been archived on 31 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

alphasparc

25 Aug 2011, 13:39

I want to port Prolink WNR1008 to OpenWRT
http://www.prolink2u.com/new/products/index.php?cid=287
This router has 64MB DDR2 RAM and 16MB Flash.
It is a New Realtek SOC Router.
It has Wireless BGN 2.4GHZ

Radio
RTL8192CE-VA4 2X2 BGN
http://www.realtek.com/products/product … ProdID=278

Processor:
RTL8198 SOC
http://www.realtek.com.tw/products/prod … ProdID=308

V59C1512164QDJ25A 64MB DDR2 RAM BGA Soldered

The SDK is here
http://www.prolink.com.sg/GPL/

I need directions on how to proceed from here, especially flashing and testing.

The discussion might have continued from here.

Page 1 of 1