Perhaps someone could give me a hint how you can connect to the serial port of WAG320N?
Only information about working serial port on this unit I've found is pseudonym404' post (https://forum.openwrt.org/viewtopic.php … 24#p102924) containing output from console.
So far I've confirmed location of 3.3V (pin 1) and GND (pin 4) signals on J5 connector but after this no luck (still trying). Unfortunately it seems that either I'm simply searching in wrong place or you have to solder additional elements (possible R154, R155, R173).

P.S. I don't care about DSL or even WiFi part of this device. I'm thinking about turning it into kind of data acquisition station (RS485 and Flash/SD card over USB + SNMP for remote access).

Thanks

____________________________
      Miroslaw Lach (MiLek)

(Last edited by milek on 25 Jul 2011, 20:16)