OpenWrt Forum Archive

Topic: mf612 3g modem

The content of this topic has been archived on 24 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

I have the mf612 3g modem (http://wwwen.zte.com.cn/en/products/mobile/handset_services/faq/201007/t20100705_187032.html ) .The nmap output give me that is running on linux.I can connect to the telnet ,but cannot log in.I try the root and my admin pass(pass is admin ( default pass) )  no success.
But when i type admin admin the telnet session dont give me anything(not shell, no error)

Questions:
1) How i can loggin' to it?

2) Is it possible to install to this device another Linux distro?(I need this to install additional soft - vpnc )

3) Where i can find the service software to connect router via miniusb?

4) Is there the jtag or serial port(see the photos)?

http://imageshack.us/photo/my-images/3/20110519001.jpg
http://imageshack.us/photo/my-images/198/20110519004.jpg
http://imageshack.us/photo/my-images/20/20110519005.jpg
http://imageshack.us/photo/my-images/820/20110519006.jpg

nmap output(reduces )

Starting Nmap 5.51 ( http://nmap.org ) at 2011-05-19 14:39 Caucasus Standard Time
NSE: Loaded 57 scripts for scanning.
Scanning 192.168.0.1 [1 port]
Initiating SYN Stealth Scan at 14:40
Scanning 192.168.0.1 [10000 ports]

Discovered open port 80/tcp on 192.168.0.1
Discovered open port 3535/tcp on 192.168.0.1
Discovered open port 4719/tcp on 192.168.0.1
Not shown: 9997 closed ports
PORT     STATE SERVICE VERSION

80/tcp   open  http    GoAhead-Webs embedded httpd
|_http-methods: No Allow or Public header in OPTIONS response (status code 400)
| http-title: ZTE Gateway - webGUI MF612
|_Requested resource was http://192.168.0.1/login.asp

3535/tcp open  unknown
4719/tcp open  telnet  BusyBox telnetd (! sic)
Device type: general purpose
Running: Linux 2.6.X
OS details: Linux 2.6.13 - 2.6.31

Maybe someone can give me the list of default passes of zte(or busybox telnetd)?

The discussion might have continued from here.