OpenWrt Forum Archive

Topic: Astaro AP30 serial pinouts

The content of this topic has been archived on 3 Feb 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
rsaxvc
13 Jan 2011, 03:41

If you open the Astaro AP30, the serial port is the 4 pin connector. It goes SquarePin(power?), Ground, SerialFromDeviceToPC, SerialFromPCToDevice. Baud rate is 56k@3.3Volts, 8N1.

http://www.flickr.com/photos/40925843@N03/5331804931/

Here's more pictures
http://www.flickr.com/photos/40925843@N … 331804931/

Here's some blog posts about it.
http://rsaxvc.net/blog/2010/12/astaro-a … rdown.html
http://rsaxvc.net/blog/2011/01/root.html


Since it is already running a build of OpenWRT, does anyone know where to find the GPL sources for it?

Post #2
jackadaniel
14 Jan 2011, 19:10

The Open Source code for all Astaro products is distributed via ISO, for the latest GPL code grab the ISO here:

ftp://ftp.astaro.de/pub/Astaro_Security … 80-7.1.iso

(yeah, you'll have to dig around a bit to find the wireless bits)

The discussion might have continued from here.