I had OpenWrt Backfire installed, and tried to use Fon Flash to move to DD-WRT v24.

However all I can see now is LEDs blinking if I connect a cable to LAN/WAN, and that I can't ping to any ip.

Details:
Router:  Dlink DIR-300
Last Message: A success message from Fon Flash, saying flash was successful, and router will restart. Strangely the fis create linux command on it took place very fast.
Pings:
Unsuccessful to 192.168.1.1 when connected with 192.168.1.2
Unsuccessful to 192.168.0.1 when connected with 192.168.0.23
Unsuccessful to 192.168.20.81 when connected with 192.168.20.80

Is there anything at I can do, or is it truly bricked?

(P.S: I know this has been asked, but not the same exact set of problems, and none of the solutions to the other problems work)

Which fon_flash did you run? There's a special fon_flash for D-Link DIR-300-A1.

http://www.gargoyle-router.com/wiki/dok … nk_dir-300

fyi, thanks for pointing me in the right direction

I used version meant for DIR-300, its unbricked, and running smooth. thanks!