I just got one of these yesterday and wonder if it"s supported. Here is the "cat /proc/cpuinfo" response:
=====================
system type             : 96348GW-10
processor               : 0
cpu model               : BCM6348 V0.7
BogoMIPS                : 239.20
wait instruction        : no
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : no
unaligned access                : 14727630
VCED exceptions         : not available
VCEI exceptions         : not available

=======================

This unit is an ADSL2+ modem/router with 2 USB ports (similar to the WL-600 I think). Anyone have any experience with these units?
Really would appreciate some feedback on this.

Thanks
Evert

Ps. cat /proc/meminfo:

> cat /proc/meminfo
MemTotal:        29464 kB
MemFree:          9540 kB
Buffers:          1912 kB
Cached:          10584 kB
SwapCached:          0 kB
Active:           5320 kB
Inactive:         9032 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        29464 kB
LowFree:          9540 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
Mapped:           3836 kB
Slab:             3436 kB
Committed_AS:     5636 kB
PageTables:        396 kB
VmallocTotal:  1048560 kB
VmallocUsed:      1532 kB
VmallocChunk:  1046860 kB
>

(Last edited by igortsky on 28 Apr 2010, 13:43)

run but without ADSL!!!!

Thanks Andrey, will have to wait till there is support for the modem then. I believe there are only closed source drivers for modem chip at the moment, you think it likely the situation will change in the future?

Evert

we wait more than one year!!!!

broadcom NOT open source for adsl - only binary drivers avaible.

If I compile FW from source, is it possible to include binary driver?

Evert

possible, like this https://forum.openwrt.org/viewtopic.php?id=24424

but how make they work - I do not know.

Does anyone know which OpenWrt image to use with DSL-N13?

I have tried flashing :

openwrt-96348GW-10-squashfs-bc300-cfe.bin          01-Apr-2010 08:21             2686980
openwrt-96348GW-10-squashfs-bc310-cfe.bin          01-Apr-2010 08:21             2686980
openwrt-96348GW-10-squashfs-bccfe-cfe.bin          01-Apr-2010 08:21             2686980

but none seemed to boot.

(Last edited by MilanKrstic on 3 Aug 2010, 10:18)

I found a firmware source code released by Asus under GPL. It will help very much, i think
http://dlcdnet.asus.com/pub/ASUS/wirele … _1148A.zip