OpenWrt Forum Archive

Post #1

Baka429

18 Dec 2009, 14:52

I'll apologize in advance for beeing a noob and I'm sure there's no stupid question, just stupid people and i'm one of them

i'm currently running Kamikaze 8.09_RC1 (r13787) on the cambria but i haven't been able to get the OLSR interface to show up. I'm hoping if I flash the latest version of Kamikaze that might fix my problem but I have no idea how to do this. So far I've downloaded openwrt-cambria-zImage and openwrt-ixp4xx-squashfs.img. Then i become a complete retard and don't know what to do next Curious if there is a how to install walkthrough for noobs like me.

Post #2

Baka429

18 Dec 2009, 16:52

I was able to flash openwrt-cambria-zImage and openwrt-ixp4xx-squashfs.img by following the commands

fis init -f
load -r -b %{FREEMEMLO} openwrt-cambria-zImage
fis create kernel
load -r -b %{FREEMEMLO} openwrt-ixp4xx-squashfs.img
fis create rootfs

I reset then i get the following

Trying NPE-C...success. Using NPE-C with PHY 1. cachembria-zima
G
... Lock from 0x5
CPU0: I ca
Ethernet eth0: MAC address 00:d0:12:41:ec:f9ines, 32 setsload -r -b %{FREEMEMLO} openwrt
IP: 192.168.1.10/255.255.255.0, Gateway: 192.168.1.132768 bytes, associativity 32, 32 byte lines, 32 set
Default server: 192.168.1.99p_sendto: Can't find address

RedBoot(tm) bootstrap and debug envi                                  
Manufacture Date: 09-01-2009sh table entries: 512 (order
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2007 Free Software Foundation, Inc.hash table entries: 16384 (order: 4, 65536 bytes)n't get BOOTP inf
Default serv
Copyright (C) 2004 - 2008 Gateworks Corp.he hash table entries: 8192 (order: 3, 32

RAM: 0x00000000-0x08000000, [0x00030c50-0x07fc1000] availableate
IP:
Memory: 128MB = 128MB totalole for special debug mess
FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.bug at boot time: falsepo

RedBoot(tm) bootstrap and 
SLUB: Genslabs
RedBoot> fis listrder=0-3, MinObje
Name              FLASH addr  Mem addr    Length      Entry point- b
RedBoot> fconfigle in I
Mount-cache hash table eoot:         

RedBoot(tm) bootstrap and debug environment [ROM]er: GW2358-4t at 
TCP established hash table entr
Red Hat certified release, version 2.04.13 - built 11:36:34, Jan 23 2009e: 115200004, 2007 Free 
TCP bind hash table entries: 4096 (order: 2, 16

Platform: Gateworks Cambria Platform (IXP43X) BEages: falseright 
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2007 Free Software Foundation, Inc.
Copyright (C) 2004 - 2008 Gateworks Corp.

RAM: 0x00000000-0x08000000, [0x00030c50-0x07fc1000] available
FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
RedBoot> +No devices on IDE controller 0

Trying NPE-C...success. Using NPE-C with PHY 1.
Ethernet eth0: MAC address 00:d0:12:41:ec:f9
IP: 192.168.1.10/255.255.255.0, Gateway: 192.168.1.1
Default server: 192.168.1.99

RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 2.04.13 - built 11:36:34, Jan 23 2009

Platform: Gateworks Cambria Platform (IXP43X) BE
Model Number: GW2358-4
Manufacture Date: 09-01-2009
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2007 Free Software Foundation, Inc.
Copyright (C) 2004 - 2008 Gateworks Corp.

RAM: 0x00000000-0x08000000, [0x00030c50-0x07fc1000] available
FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
RedBoot>

It goes straight to RedBoot then I dont know what to do next. Any info will be helpful. I want to get this platform working and running OLSR.

(Last edited by Baka429 on 18 Dec 2009, 16:58)

Post #3

Baka429

18 Dec 2009, 22:20

Figured it out. I didn't load the kernel and then execute. Figured out the olsr interface as well. There's a package that needs to be installed to get it into the Service menu.

Post #4

sathyajitb

16 Feb 2010, 18:21

Sorry Baka,
I am facing the same problem. Can you please elaborate on how you figured it out ??

Regards,
Sathya

(Last edited by sathyajitb on 16 Feb 2010, 18:22)