1,226

Re: TP Link WR1043ND 11n gigabit router

Is the newest original firmware safe to revert back to stock?: wr1043nv1_en_3_13_10_up(120210).bin  Does anyone tested it?

It seems that there is a header:
http://www.bilderload.com/bild/184770/bildschirmfoto20120310um202351250DS.png

1,227 (edited by alphasparc 2012-03-11 00:22:25)

Re: TP Link WR1043ND 11n gigabit router

Post your config file and did you use LuCI backup?
I can tell your for sure no problem because I am using it and it works fine.

1,228

Re: TP Link WR1043ND 11n gigabit router

Nandopi wrote:

Thanks for your help so far, but it didn't work. I tried with trunk r30753 and your image r30848.

I didn't expect anything wrong with the images, but at least I know my image has all drivers working correctly against a range of n-devices I have. You can find my wireless config posted a couple of posts up. Can you please verify that identical set-up to mine still doesn't give you n-functionality. Please also confirm explicitly that you try using my config file.

If still no luck, please test with an up-to-date live linux CD from you client, it makes for a cleaner test environment.

Yes, I believe you can install stock firmware straight from the web-interface. Although that has never been an option for me, so I haven't tested it.

Re: TP Link WR1043ND 11n gigabit router

Anyone knows why is uboot-envtools part of the default package?
I don't think many users actually need it?
Is vsc7385-ucode-ap83 & vsc7395-ucode-ap83 vital for all AP83 platforms or just Vitesse Platform.
Any performance effects on installing it and not installing it?

1,230

Re: TP Link WR1043ND 11n gigabit router

Hi @ all!

I need some help..after facing WLAN instabilities, i decided to upgrade to latest trunk this morning. Before that i used 10.3 final for almost 2 months now! I upgraded through the Luci webinterface, the router rebooted and i internet-access and wireless worked without a problem. The REAL problem i am facing now is, that i cannot use the luci webinterface anymore. I tried the opkg method described in the Wiki, but opkg cant connect to the internet..any idea? (i think luci is still on my router, but maybe not enabled?)

Best regards,

phil

1,231

Re: TP Link WR1043ND 11n gigabit router

This seems more like a network configuration problem, rather than hardware-related. Anyways you could provide more specific information, how you want to access the internet with your router and post the log of the following commands run in the routers cli:

ping www.google.com
opkg update
opkg list-installed
uci show network

1,232

Re: TP Link WR1043ND 11n gigabit router

Hi,

thanks for your reply MBS, i figured out what the problem was:
my 1043nd received an IP by my first router, which establishes the connection to the internet, by dhcp (as all my other lan/wlan clients do).
the problem why i couldnt receive an update with opkg on the 1043nd was that it had no dns server listed in the network config. i manually added an dns server, could therefore receive an opkg list update, downloaded luci an activated the webinterface as it is described in the wiki!

Best regards,

phil

1,233

Re: TP Link WR1043ND 11n gigabit router

I am trying to figure out whether this router is set up to use hardware cryptography. Before I spend more time, it is great to hear if anybody else already looked into it. What I have seen so far is the following:
Benchmark results: http://wiki.openwrt.org/inbox/benchmark.openssl
The SoC does seem to have hardware encryption: http://www.datasheetarchive.com/ar9132*-datasheet.html
There are some notes on how to achieve hardware acceleration for select chips: http://wiki.openwrt.org/doc/hardware/cr … celerators

I have tried compiling an image enabling Crypto acceleration support in libopenssl, but it had no effect on the openssl benchmarks nor on an scp file transfer.

That is about how far I got, was thinking about tracking kernel modules for this chip, but great if anybody can give me the quick answer.

Re: TP Link WR1043ND 11n gigabit router

Del wrote:

I am trying to figure out whether this router is set up to use hardware cryptography. Before I spend more time, it is great to hear if anybody else already looked into it. What I have seen so far is the following:
Benchmark results: http://wiki.openwrt.org/inbox/benchmark.openssl
The SoC does seem to have hardware encryption: http://www.datasheetarchive.com/ar9132*-datasheet.html
There are some notes on how to achieve hardware acceleration for select chips: http://wiki.openwrt.org/doc/hardware/cr … celerators

I have tried compiling an image enabling Crypto acceleration support in libopenssl, but it had no effect on the openssl benchmarks nor on an scp file transfer.

That is about how far I got, was thinking about tracking kernel modules for this chip, but great if anybody can give me the quick answer.

How about the conclusion that AR9130 does not have any Hardware Crypto Support at all?
I had actually want to test compiling libopenssl with hardware crypto but you saved me the trouble. Thanks.

1,235

Re: TP Link WR1043ND 11n gigabit router

I know too little about the driver/module infrastructure for these devices to do an effective search, but some more thoughts and links.

Indeed alphasparc, it does seem that it is all done in software. I noticed your compiler tests using mtune (ref. https://forum.openwrt.org/viewtopic.php?id=35323). Since you indeed got gains on the ssl-benches, it seems safe to conclude that there is no hardware acceleration involved for those benches.

I found hardware acceleration of encryption within the ath9k driver, which I assume is related to encryption of wireless traffic. Using WPA or WPA2, the wireless on the router can sustain more than 80mb/s traffic, close to peak throughput I get with samba traffic on the router. So with my limited overview of the problem at hand, I believe the hardware encryption is exposed by the ath9k module and successfully used for encryption of wireless traffic. If I am correct, the natural next question is how to make libopenssl use the hardware crypto-engine exposed in ath9k?

1,236

Re: TP Link WR1043ND 11n gigabit router

Anyone have problem with packets drop on the WAN port?
https://forum.openwrt.org/viewtopic.php?id=35634

1,237

Re: TP Link WR1043ND 11n gigabit router

I have no packet loss on the wan port. Check with a computer connected directly to your wan port so that you can rule out your ISP from the equation. Also note that I run trunk, i.e., 3.2 kernel with up-to-date modules.

1,238 (edited by jijix 2012-03-26 11:42:20)

Re: TP Link WR1043ND 11n gigabit router

Hi, I bricked my router.
I following instruction for unbricking, but when I make connection with rs232 see only like this:

"§¿'-#5-=9/5¿“—){§¿Sm_W§¿—¥=9/5¿/=/¿=;'5¿5#5‹¿›Ÿ— ¿¯!5¿5#5‹¿ › ¿¯!5… !#5'-¿-#¿K!#5¿!5!;-'-
§¿Sm_W§¿9=9/5¿='-=5§¿'-#5-
¿==-'=;'5¿¯  ‘›)¿)5'¿9!75§¿™Ÿ•“)¿557§¿™“›)¿7==§¿ —Ÿ)¿-#-§¿Ÿ)¿/-1/%5%­åëRûûûû£ŸŸŸŸŸŸE¿c[Am[]Y‹ › åëI¿¿¿¿Ÿ£ŸŸŸŸŸŸE¿-¿-#-¿7!#5åëI¿¿¿¿Ÿ£ŸŸ5­åëI¿¿¿¿Ÿ£› ŸŸŸŸE¿Wy_‹¿o=/¿=;'5¿9!#3-17¿¯5=;'-/57¿ Ÿ›—¿;-#7¿ Ÿ›—­åëI¿¿¿¿Ÿ£™ŸŸŸŸŸE¿Wy_¿#!¿1-57åëI¿¿¿¿Ÿ£™ŸŸŸŸŸE¿Uw_¿/=/¿=;'5¿5#5‹¿›•“¿¯¿ åëRûûûû£™›ŸŸŸŸE¿1-!A9‹¿%!7'5¿'!=757¿=#7¿¡9¡1-!¡¿9=57åëI¿¿¿¿Ÿ£™›ŸŸŸŸE¿[51-5uw¿w5-95åëRûûûû£™™ŸŸŸŸE¿'Ÿ1-!A9‹¿%!7'5¿'!=757¿=#7¿¡9¡'Ÿ1-!¡¿9=57åëI¿¿¿¿Ÿ£™™ŸŸŸŸE¿}[‘ ŸŸ¿q_may¿%=+!ûûûû£™—ŸŸŸŸE¿-#-A7!¿9953''åëRûûûû£™—ŸŸŸŸE¿=/3‹¿5-!#¿™£Ÿ¿¯›ŸŸ“¡Ÿ™¡ •­¿_/-''-¿g!1/5¿¿¿¿Ÿ£™•ŸŸŸŸE¿%1%#-¿/=¿;55#¿5¿!¿• åëRûûûû£™•ŸŸŸŸE¿-!¿9/57'5!¿1-57åëI¿¿¿¿Ÿ£™“ŸŸŸŸE¿-!¿9/57'55=7'-#5¿1-57¿¯753='­åëRûûûû£™“ŸŸŸŸE¿Y5='‹¿ ›•Ÿ¡ “••Ÿ¿75!YŸE¿5#=;'57§¿;!!9!#!'5¿7-=;'57åëRûûûû£™ ŸŸŸŸE¿1557¿3'=/-9!#!'5¿I
5¿…¿ eåëHý¿¿¿Ÿ£™ ŸŸŸŸE¿9=##-#1¿3!!¿=--!#åëRûûûû£—ŸŸŸŸŸE¿'-#)¿;!!¿755957åë$ý¿¿¿Ÿ£—ŸŸŸŸŸE¿;!!'!=75-
5¿…¿›ŸŸŸŸåëRûûûû£— ŸŸŸŸE¿åë’¿¿¿¿Ÿ£— ŸŸŸŸE¿3!#7¿=/3¿=¿ ŸŸŸŸŸåë€êûûûû£— ŸŸŸŸE¿y=-#1¿ ¿eWw¿=--!#¿!#¿»=
¿ŸŸŸŸŸŸŸŸŸŸŸŸŸ¥ŸŸŸŸŸŸŸŸ›ŸŸŸŸ¿‹¿»[57{!!»åëRûûûû£—›ŸŸŸŸE¿ŸŸŸŸŸŸŸŸ›ŸŸŸŸ¥ŸŸŸŸŸŸŸ‘5ŸŸŸŸ¿‹¿»'-#»åëRûûûû£—™ŸŸŸŸE¿ŸŸŸŸŸŸŸ ŸŸŸŸŸ¥ŸŸŸŸŸŸŸ‘›ŸŸŸŸ¿5%åë ý¿¿¿Ÿ£——ŸŸŸŸE¿ŸŸŸŸŸŸŸ‘›ŸŸŸŸ¥ŸŸŸŸŸŸŸ‘5ŸŸŸŸ¿‹¿»77»åëRûûûû£—•ŸŸŸŸE¿ŸŸŸŸŸŸŸ‘5ŸŸŸŸ¥ŸŸŸŸŸŸŸ‘3ŸŸŸŸ¿‹¿»#%»åëRûûûû£—•ŸŸŸŸE¿ŸŸŸŸŸŸŸ‘3ŸŸŸŸ¥Ÿûûûû£—“ŸŸŸŸE¿ŸŸŸŸŸŸŸ‘3ŸŸŸŸ¥ŸŸŸŸŸŸŸ ŸŸŸŸŸ¿‹¿»;!=A9!#3-1»åëRûûûû£—‘ŸŸŸŸE¿ŸŸŸŸŸŸŸŸŸŸŸŸŸ¥ŸŸŸŸŸŸŸ ŸŸŸŸŸ¿‹¿»3''3'=/»åëRûûûû£—‘ŸŸŸŸE¿___¿15#59¿755-!#¿›£—£›åëRûûûû£— ŸŸŸŸE¿___¿w53'=5¿y!%-!#¿%!7'5¿1-57åë ý¿¿¿Ÿ£— ŸŸŸŸE¿___¿{Yw¿y!%-!#¿%!7'5¿1-57åëRûûûû£— ŸŸŸŸE¿___¿e__u¿y!%-!#¿%!£åë@êûûûû£• ŸŸŸŸE¿ío!!)-#1¿me]¿;53!¿c}W¿!#¿_[u[aUWmcq£åëHý¿¿¿Ÿ£• ŸŸŸŸE¿ío!!)-#1¿me]¿=35}W¿!#¿_aYW[aUWmcq£åë êûûûû£•›ŸŸŸŸE¿#‹¿U#-5='¿WU¿‡%=)='9!%%£9!%ƒåëRûûûû£•™ŸŸŸŸE¿Y!3=¿Q=9/7!1¿W-%5#--='-
!…¿Ÿ­åëRûûûû£••ŸŸŸŸE¿™›¿9'=-3-5ý¿¿¿Ÿ£••ŸŸŸŸE¿¿¿¿¿-#¿75-95¿9/59)¿!#¿åë$ý¿¿¿Ÿ£••ŸŸŸŸE¿¿¿¿¿}9-!#¿9!#3-17¿åë@êûûûû£•“ŸŸŸŸE¿c53-'55=15¿-=¿cuWgmci¿Ÿ£™Ÿ£åëRûûûû£•“ŸŸŸŸE¿#3A9!##9)¿5-!#¿Ÿ£•£Ÿ¿¯—“—¿;9)5§¿  •“¿%=­åëRûûûû£•‘ŸŸŸŸE¿yacsmqAcsAyWA}yyW¿-¿759=57¿=#7¿-''¿;5¿%!57¿!!#£¿_'9'¿#5£#53-'5A9!##9)A=99… ¿!¿5#=;'5¿-£åëRûûûû£• ŸŸŸŸE¿#3A9!##9)A¿Ÿ£“£› ¿'!=7-#1åëRûûûû£• ŸŸŸŸE¿#3A#=A¿Ÿ£“£› ¿'!=7-#1åëRûûûû£“ŸŸŸŸŸE¿-A=5¿ ›¿-#¿=/3A-15½åëRûûûû£“ ŸŸŸŸE¿g-¿!3¿=''¿=--!#‹åë ý¿¿¿Ÿ£“ ŸŸŸŸE¿ 3ŸŸ¿¿¿¿¿¿¿¿¿¿¿¿¿ › ¿%7;'!9)Ÿ~¯75$ý¿¿¿Ÿ£“ ŸŸŸŸE¿Wy_¿/
¿ 3Ÿ ¿¿¿¿¿¿¿¿¿¿¿¿‘ ™“¿%7;'!9) ü¯75ý¿¿¿Ÿ£“ ŸŸŸŸE¿ 3Ÿ›¿¿¿¿¿¿¿¿"

There is the log from 3 different windows program.
I have not tried it with Linux, yet.
Can you give me advice, where is the mistake?
Thank you in advance for support.

1,239

Re: TP Link WR1043ND 11n gigabit router

what do you mean by "rs232" connection?????

i hope you're not connecting it directly to serial port..

1,240 (edited by jijix 2012-03-26 14:04:03)

Re: TP Link WR1043ND 11n gigabit router

I use cable TTL convert?r with chip PL2303.
By the way, I tried also with converter with FTDI chip. The result it the same.
I think the above log shows that I reading data through serial port?

1,241

Re: TP Link WR1043ND 11n gigabit router

Usually garbage... means dead bootloader

DWL-2100AP Ramponis Homepage
http://xoomer.alice.it/ramponis/

1,242

Re: TP Link WR1043ND 11n gigabit router

Is there a solution or buy a new router?

1,243

Re: TP Link WR1043ND 11n gigabit router

in the wiki you can read that debrick with jtag is not possible.

http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd#jtag

So you can try a different solution like this

https://forum.openwrt.org/viewtopic.php?id=25217

or buy a new router wink

DWL-2100AP Ramponis Homepage
http://xoomer.alice.it/ramponis/

1,244

Re: TP Link WR1043ND 11n gigabit router

hello All, i have a little problem with my EVDO modem.

i have installed last stable openwrt version 10.03.1 on my tp-link. i installed some package that needed to recognize my modem.

i think my modem is installed correctly

root@OpenWrt:/# ls /dev      
1-1                 mtd4ro              random
console             mtd5                shm
cpu_dma_latency     mtd5ro              tty
full                mtdblock0           ttyS0
kmsg                mtdblock1           ttyUSB0
log                 mtdblock2           ttyUSB1
mem                 mtdblock3           ttyUSB2
mtd0                mtdblock4           ttyUSB3
mtd0ro              mtdblock5           ttyUSB4
mtd1                network_latency     ttyUSB5
mtd1ro              network_throughput  urandom
mtd2                null                usb1
mtd2ro              port                watchdog
mtd3                ppp                 zero
mtd3ro              ptmx
mtd4                pts
root@OpenWrt:/#
root@OpenWrt:/# 
root@OpenWrt:/# cat /proc/bus/usb/devices 

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.32.27 ehci_hcd
S:  Product=Atheros AR91xx built-in EHCI controller
S:  SerialNumber=ar71xx-ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9e00 Rev= 0.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E:  Ad=8d(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=0d(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbserial_generic
E:  Ad=8e(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=0e(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbserial_generic
E:  Ad=87(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
root@OpenWrt:/#

My device is attached to /dev/ttyUSB3

root@OpenWrt:/# gcom -d /dev/ttyUSB3 info
##### Wireless WAN Modem Configuration #####
Product text:
====

Manufacturer: Manufacturer
Model: EVDO USB MODEM
Revision: LCA6R01.1.0_M034
ESN: 0x800CA269
+GCAP: +CIS707-A, CIS-856, +MS, +ES, +DS, +FCLASS
OK
====
Manufacturer:           Manufacturer
IMEI and Serial Number: 0x800CA269
Manufacturer's Revision: 
LCA6R01.1.0_M0
Hardware Revision:      

Network Locked:         

Customisation:          

Band settings:          (
)
APN:                    

##### END #####

root@OpenWrt:/#

but, i can't connect to ineternet.

root@OpenWrt:/# logread | tail -100
...
Mar 28 16:16:51 OpenWrt user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Mar 28 16:16:51 OpenWrt user.info kernel: usbserial_generic 1-1:1.0: generic converter detected
Mar 28 16:16:51 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB0
Mar 28 16:16:51 OpenWrt user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Qualcomm,_Incorporated Product=USB_MMC_Storage Serial=000002
Mar 28 16:16:51 OpenWrt user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/1c9e:9e00 for mode switching
Mar 28 16:16:51 OpenWrt user.info kernel: generic ttyUSB0: generic converter now disconnected from ttyUSB0
Mar 28 16:16:51 OpenWrt user.info kernel: usbserial_generic 1-1:1.0: device disconnected
Mar 28 16:16:52 OpenWrt user.warn kernel: usb 1-1: usbfs: process 1584 (usb_modeswitch) did not claim interface 0 before use
Mar 28 16:16:52 OpenWrt user.info kernel: usb 1-1: USB disconnect, address 2
Mar 28 16:16:53 OpenWrt user.info kernel: usb 1-1: new full speed USB device using ar71xx-ehci and address 3
Mar 28 16:16:53 OpenWrt user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Mar 28 16:16:53 OpenWrt user.info kernel: usbserial_generic 1-1:1.0: generic converter detected
Mar 28 16:16:53 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB0
Mar 28 16:16:53 OpenWrt user.info kernel: usbserial_generic 1-1:1.1: generic converter detected
Mar 28 16:16:53 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB1
Mar 28 16:16:53 OpenWrt user.info kernel: usbserial_generic 1-1:1.2: generic converter detected
Mar 28 16:16:53 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB2
Mar 28 16:16:53 OpenWrt user.info kernel: usbserial_generic 1-1:1.3: generic converter detected
Mar 28 16:16:53 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB3
Mar 28 16:16:53 OpenWrt user.info kernel: usbserial_generic 1-1:1.4: generic converter detected
Mar 28 16:16:53 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB4
Mar 28 16:16:53 OpenWrt user.info kernel: usbserial_generic 1-1:1.5: generic converter detected
Mar 28 16:16:53 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB5
Mar 28 16:16:55 OpenWrt user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Qualcomm,_Incorporated Product=Qualcomm_CDMA_Technologies_M?
Mar 28 16:16:55 OpenWrt user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/1c9e:9e00 for mode switching
Mar 28 16:16:55 OpenWrt user.notice usb-modeswitch: 1-1:1.1: Manufacturer=Qualcomm,_Incorporated Product=Qualcomm_CDMA_Technologies_M?
Mar 28 16:16:55 OpenWrt user.notice usb-modeswitch: 1-1:1.1: Selecting /etc/usb_modeswitch.d/1c9e:9e00 for mode switching
Mar 28 16:16:56 OpenWrt user.notice usb-modeswitch: 1-1:1.2: Manufacturer=Qualcomm,_Incorporated Product=Qualcomm_CDMA_Technologies_M?
Mar 28 16:16:56 OpenWrt user.notice usb-modeswitch: 1-1:1.2: Selecting /etc/usb_modeswitch.d/1c9e:9e00 for mode switching
Mar 28 16:16:56 OpenWrt user.notice usb-modeswitch: 1-1:1.3: Manufacturer=Qualcomm,_Incorporated Product=Qualcomm_CDMA_Technologies_M?
Mar 28 16:16:56 OpenWrt user.notice usb-modeswitch: 1-1:1.3: Selecting /etc/usb_modeswitch.d/1c9e:9e00 for mode switching
Mar 28 16:16:56 OpenWrt user.notice 3g-hotplug: Starting interface EVDO for device ttyUSB3
Mar 28 16:16:57 OpenWrt user.notice usb-modeswitch: 1-1:1.4: Manufacturer=Qualcomm,_Incorporated Product=Qualcomm_CDMA_Technologies_M?
Mar 28 16:16:57 OpenWrt user.notice usb-modeswitch: 1-1:1.4: Selecting /etc/usb_modeswitch.d/1c9e:9e00 for mode switching
Mar 28 16:16:57 OpenWrt user.notice usb-modeswitch: 1-1:1.5: Manufacturer=Qualcomm,_Incorporated Product=Qualcomm_CDMA_Technologies_M?
Mar 28 16:16:57 OpenWrt user.notice usb-modeswitch: 1-1:1.5: Selecting /etc/usb_modeswitch.d/1c9e:9e00 for mode switching
Mar 28 16:16:58 OpenWrt daemon.notice pppd[1811]: pppd 2.4.4 started by root, uid 0
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: abort on (BUSY)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: abort on (NO CARRIER)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: abort on (ERROR)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: abort on (NO DIAL TONE)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: abort on (NO ANSWER)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: abort on (DELAYED)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: report (CONNECT)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: timeout set to 10 seconds
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: send (AT^M)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: expect (OK)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: AT^M^M
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: OK
Mar 28 16:16:59 OpenWrt local2.info chat[1818]:  -- got it
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: send (ATZ^M)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: timeout set to 30 seconds
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: expect (OK)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: ATZ^M^M
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: OK
Mar 28 16:16:59 OpenWrt local2.info chat[1818]:  -- got it
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: send (ATDT#777^M)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: expect (CONNECT)
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: ATDT#777^M^M
Mar 28 16:16:59 OpenWrt local2.info chat[1818]: ^MODE:2^M
Mar 28 16:17:02 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:17:02 OpenWrt local2.info chat[1818]: ^HRSSILVL:20^M
Mar 28 16:17:02 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:17:02 OpenWrt local2.info chat[1818]: ^HRSSILVL:0^M
Mar 28 16:17:05 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:17:05 OpenWrt local2.info chat[1818]: ^HRSSILVL:20^M
Mar 28 16:17:07 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:17:07 OpenWrt local2.info chat[1818]: ^HRSSILVL:40^M
Mar 28 16:17:07 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:17:07 OpenWrt local2.info chat[1818]: ^DATACON:1^M
Mar 28 16:17:07 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:17:07 OpenWrt local2.info chat[1818]: ^DSDORMANT:0^M
Mar 28 16:17:14 OpenWrt local2.info chat[1818]: ^M
Mar 28 16:17:14 OpenWrt local2.info chat[1818]: ^HRSSILVL:60^M
Mar 28 16:17:29 OpenWrt local2.info chat[1818]: alarm
Mar 28 16:17:29 OpenWrt local2.info chat[1818]: Failed
Mar 28 16:17:29 OpenWrt daemon.err pppd[1811]: Connect script failed
root@OpenWrt:/#

i'm not change the default script.

please your support. .Thanks

1,245 (edited by raz123 2012-04-06 16:47:49)

Re: TP Link WR1043ND 11n gigabit router

slippern wrote:

Anyone have problem with packets drop on the WAN port?
https://forum.openwrt.org/viewtopic.php?id=35634

Yep.

I got this yesterday:

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time=2052ms TTL=64
Reply from 192.168.1.1: bytes=32 time=2019ms TTL=64
Reply from 192.168.1.1: bytes=32 time=1963ms TTL=64
Request timed out.
Reply from 192.168.1.1: bytes=32 time=807ms TTL=64
Reply from 192.168.1.1: bytes=32 time=2109ms TTL=64
Reply from 192.168.1.1: bytes=32 time=583ms TTL=64
Reply from 192.168.1.1: bytes=32 time=1762ms TTL=64
Reply from 192.168.1.1: bytes=32 time=758ms TTL=64
Reply from 192.168.1.1: bytes=32 time=913ms TTL=64

Ping statistics for 192.168.1.1:
    Packets: Sent = 10, Received = 9, Lost = 1 (10% loss),
Approximate round trip times in milli-seconds:
    Minimum = 583ms, Maximum = 2109ms, Average = 1440ms

TL-WR1043ND, running Gargoyle 1.5.4 (based on OpenWRT 10.03.1, r30752)

Memory usage: 14MB/28.8MB (48.6%)
Connections: 190/12288
CPU Load Averages: 0.00/0.00/0.00 (1/5/15 minutes)
Uptime: 2 days, 9 hours, 58 minutes


Nothing unusual in the logread, but dmesg spits this over and over:

ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
DMADBG_7=0x00026020

Reboot fixed it, for now..

1,246 (edited by madik 2012-04-09 19:56:10)

Re: TP Link WR1043ND 11n gigabit router

Can i ask about real transferring speed of a some device connected with Wifi on your router? Iam struggling with connection speed between router and notebook connected by WIFI. Max i can get is 8MB/s after restart but after short time the best i can get is around 3-4MB/s. And recently the connection speed is going very down during a Movies that iam watching and which are located on pc connected to a router by 1Gbit LAN. Only thing that helps is to restart router. Both router and notebook is supporting 802.11n. Is it even possible to be connected by this fastest standard? The best i can get is 130Mbit which is the G standard. Just a note that router and notebook are in the same room..
Thanks

Re: TP Link WR1043ND 11n gigabit router

Hello, those RX messages are a known issue with the 10.03.1 -RCX.

I currently have TL-WR1043ND with 10.03.1 Final (dec 2011), and no more RX messages, awesome stability with
transfers, etc.

i Have a 32 gb usb drive with a 512 MB swap and the rest in ext4.
its running samba, and transmission without problems. i get 10.4 - 11 MB/S transfers to the router and from the router.
(from a 100mbps ethernet equiped computer. and just tested gigabit transfers between nodes are fine too.  Transfers from router in wireless i havent tested yet.

i also have a WRT160NL with same 10.03.1 Final. This one has a usb 3.0 hub with 3 500GB ext4 hdd drives, serving content via minidlna, to dlna ready tvs, works like a charm even via wireless, the only thing that bothers me is that this kernel donest have inotify enabled sad.

so, 10.03.1 Final is a must update, it gets rock solid.

best regards.

pd. have anyone tested 160nl with trunk? i really need that inotify thing, minidna takes 4 hours to rebuild the content database on the 3 hdd, so i suffer at making changes on my media frecuently sad, word is trunk has inotify, but i dont want to loose the current stability.

Re: TP Link WR1043ND 11n gigabit router

madik wrote:

Can i ask about real transferring speed of a some device connected with Wifi on your router? Iam struggling with connection speed between router and notebook connected by WIFI. Max i can get is 8MB/s after restart but after short time the best i can get is around 3-4MB/s. And recently the connection speed is going very down during a Movies that iam watching and which are located on pc connected to a router by 1Gbit LAN. Only thing that helps is to restart router. Both router and notebook is supporting 802.11n. Is it even possible to be connected by this fastest standard? The best i can get is 130Mbit which is the G standard. Just a note that router and notebook are in the same room..
Thanks

N standart is only available if router can have 2 channels, if your location is too noisy, you wont get the N throughput. which openwrt version are you using? isnt the G standard 54Mbps?  well 12 MB/s are around 100Mbps, so 8 must be around 54Mbps right? thats G.

1,249

Re: TP Link WR1043ND 11n gigabit router

miguel.arce wrote:

well 12 MB/s are around 100Mbps, so 8 must be around 54Mbps right? thats G.

you  must be kiddin XD

54 Mbps equals to a maximum of 2-2.5 MB/s in TCP transfers...

1,250 (edited by DerUltrazauberer 2012-04-10 21:07:27)

Re: TP Link WR1043ND 11n gigabit router

I'm trying to get my WLAN work with OpenWRT and 300mpbs. In my neighbourhood are no other wlan so there should be no interferences.

Here is my config:

root@OpenWrt:~# cat /etc/config/wireless

config wifi-device 'radio0'
        option type 'mac80211'
        option macaddr 'aa:bb:cc:dd:ee:ff'
        option hwmode '11ng'
        list ht_capab 'SHORT-GI-40'
        list ht_capab 'DSSS_CCK-40'
        option country 'DE'
        option noscan '1'
        option txpower '20'
        option channel '13'
        option htmode 'HT40-'
        option diversity '1'
        option distance '10'

config wifi-iface
        option device 'radio0'
        option network 'lan'
        option mode 'ap'
        option ssid 'OpenWrt'
        option encryption 'psk2+ccmp'
        option key '**************'

http://www.abload.de/img/openwrt_wlan_5ahuup.png

Has anyone an idea why I'm getting only 130mps? The router is about 0.5m away from my laptop.

EDIT:
http://www.abload.de/img/openwrt_wlan_6d7ke7.png

My laptop had forced only 20MHz bandwidth in the drivers.

I have a second router two floors under my room. When I'm set the OpenWRT router to the same channel I'm unable to force 300mpbs. I also enabled the 'noscan' option. How can I force to use 2 channels? The signal from the second router is very weak.