Hello all,
I've bought this router in order to use it with a HUAWEI E1962 Usb modem. The problem is that it does not work. From what I've seen it is firmware settings issue.
Another problem is that I can control the router only from the web interface, wich is pretty empty of options.
I tried to find out what are the hardware capabilites (ram, flash size, ram size, chipset, etc) in order to see if it is compatible with Opent-wrt/ddwrt but I found out only the speed of the processor (240MHz). The rest is fuzzy. It might have 4MB of flash and 16MB of memory. I would like to find out these variables and then maybe I will try to install a third party firmware.
I tried to search information on FCC Gov site, but nothing clear.
There might be 2 options: open the box and void waranty or th access the console. By default the console is unavailable for me.
I've run nmap to see what ports are available, maybe i'll start from here Smile. Here is the result:
------------------------------
nmap -vrAT5OsVp1-65535sU 192.168.2.1
Starting Nmap 5.00 ( http://nmap.org ) at 2009-11-01 12:51 CET
NSE: Loaded 30 scripts for scanning.
Initiating ARP Ping Scan at 12:51
Scanning 192.168.2.1 [1 port]
Completed ARP Ping Scan at 12:51, 0.02s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 12:51
Completed Parallel DNS resolution of 1 host. at 12:51, 0.00s elapsed
Initiating SYN Stealth Scan at 12:51
Scanning smc33n.smc.com (192.168.2.1) [1000 ports]
Discovered open port 23/tcp on 192.168.2.1
Discovered open port 53/tcp on 192.168.2.1
Discovered open port 80/tcp on 192.168.2.1
Discovered open port 2601/tcp on 192.168.2.1
Discovered open port 2602/tcp on 192.168.2.1
Discovered open port 52869/tcp on 192.168.2.1
Completed SYN Stealth Scan at 12:51, 0.59s elapsed (1000 total ports)
Initiating Service scan at 12:51
Scanning 6 services on smc33n.smc.com (192.168.2.1)
Completed Service scan at 12:51, 11.03s elapsed (6 services on 1 host)
Initiating OS detection (try #1) against smc33n.smc.com (192.168.2.1)
NSE: Script scanning 192.168.2.1.
NSE: Starting runlevel 1 scan
Initiating NSE at 12:51
Completed NSE at 12:51, 4.01s elapsed
NSE: Script Scanning completed.
Host smc11n.smc.com (192.168.2.1) is up (0.0067s latency).
Interesting ports on smc33n.smc.com (192.168.2.1):
Not shown: 994 closed ports
PORT STATE SERVICE VERSION
23/tcp open telnet NASLite-SMB/Sveasoft Alchemy firmware telnetd
53/tcp open domain dnsmasq 2.24
80/tcp open http Mini_httpd 1.19
|_ html-title: 802.11n Router
2601/tcp open zebra Quagga routing software
2602/tcp open zebra Quagga routing software
52869/tcp open http Intel UPnP reference SDK httpd 1.2 (UPnP 1.0, platform Linux 2.6.17)
|_ html-title: Site doesn't have a title (text/html).
MAC Address: 00:12:CF:D4:D2:10 (Accton Technology)
Device type: general purpose
Running: Linux 2.6.X
OS details: Linux 2.6.9 - 2.6.28
Uptime guess: 0.199 days (since Sun Nov 1 08:05:28 2009)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=203 (Good luck!)
IP ID Sequence Generation: All zeros
Read data files from: /usr/share/nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 17.21 seconds
Raw packets sent: 1020 (45.640KB) | Rcvd: 1016 (41.376KB)
--------------------------------
Now maybe someone would be kind to explain me what is this result. I don't pretty much stuff about this, but i am learning .. or at least willing to learn Smile.
Also I tried to run telnet on the 23 port and it asks me for a username and a password. I tried the user from web interface but it does not work. In router's logs I see root user. I am guessing that the OS credentials are separate.
The firmware is the latest: 1.0.5... something like this, and from what i've seen in the SMC site there is also available the source code for that firmware.
So, I kindly ask anyone to provide me some help.
BR
(Last edited by bobeid on 1 Nov 2009, 13:12)