OpenWrt Forum Archive

Topic: Booting stopped

The content of this topic has been archived on 23 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
dimm
25 Oct 2009, 15:50 
Calibrating delay loop... 239.10 BogoMIPS (lpj=478208)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
registering 37 GPIOs
gpiochip_add: gpios 0..36 (bcm63xx-gpio) not registered
Switching to clocksource MIPS
msgmni has been set to 16
bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart

After that i see nothing.
Booting stalled or something else? (e.g. another terminal)

Post #2
dimm
25 Oct 2009, 16:02

i try put "console=ttyS0,115200" to default kernel string and what i take now:

Switching to clocksource MIPS
msgmni has been set to 16
bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
CPU 0 Unable to handle kernel paging request at virtual address 00000064, epc == 800fc894, ra == 8019803c
Oops[#1]:
Cpu 0
$ 0   : 00000000 10008400 80140000 00000000
$ 4   : 8019800c 801a1810 801a0000 80421e70
$ 8   : 801d0ba8 00000000 0000000a 000000cd
$12   : 00000007 00000000 00000000 ffffffff
$16   : 00000000 801a3c10 10008401 00000064
$20   : 00000060 801d0000 80180000 801d0000
$24   : 00000000 00000000
$28   : 80420000 80421e68 00000010 8019803c
Hi    : 00000000
Lo    : 01936de2
epc   : 800fc894 i8042_flush+0xc0/0x13c
    Not tainted
ra    : 8019803c i8042_init+0x30/0xec
Status: 10008402    KERNEL EXL
Cause : 00800008
BadVA : 00000064
PrId  : 00029010 (Broadcom BCM6338)
Modules linked in:
Process swapper (pid: 1, threadinfo=80420000, task=80418000, tls=00000000)
Stack : 8016c6b0 00000007 65746837 00000000 801a3be4 801a3c10 8019800c 00000000
        00000000 00000000 00000000 00000000 00000000 8019803c 80197cf0 00000000
        00000000 00000000 00000000 801a3be4 801a3c10 80017158 80189c50 00000080
        80180000 00000000 00000000 80062718 801a3a6c 80197b48 80188ce0 801a3be4
        801a3c10 00000000 00000000 8018d33c 00000000 00000000 00000000 00000000
        ...
Call Trace:
[<800fc894>] i8042_flush+0xc0/0x13c
[<8019803c>] i8042_init+0x30/0xec
[<80017158>] do_one_initcall+0x68/0x204
[<8018d33c>] kernel_init+0xd0/0x13c
[<800199cc>] kernel_thread_helper+0x10/0x18


Code: 00673823  0c00530a  2484ca60 <92620000> 305100ff  32220001  10400003  24040032  161effe7
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init!

What is it?

The discussion might have continued from here.