I was trying to get a compiled Kamikaze running on Meraki. I successfuly flashed the kernel image.
But i accidently overwrote the RedBoot config partition which has rendered the Mini useless. I can't access Redboot using the serial console. I did some reading and came to the conclusion that I may need to reprogram the Redboot into the router first by using JTAG. Has anybody solved this problem before? Help will be appreciated!
Topic: Meraki Mini Redboot overwritten
The content of this topic has been archived on 6 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
Just to clarify, I overwrote the redboot partition during reflashing the file system
The discussion might have continued from here.
Page 1 of 1