I'd like to boot the WL500gP v2 from USB stick. Not to have only the rootfilesystem on the USB disk, but also to load the kernel from it.
My box uses the CFE 1.0.37 which does not support USB.
However I've found newer versions of CFE on the Broadcom website http://www.broadcom.com/support/communi … nloads.php.
Has anybody tried to compile them for the WL500gP v2 and flashed the new CFE?
Well, I know that playing with CFE without JTAG is dangerous, however WL500gP v2 has JTAG connector available...
Topic: CFE upgrade in Asus WL500gP v2 possible?
The content of this topic has been archived on 5 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1