On startup via hyperterminal (serial) it says:
CFE 1.5 (C) Sagem but this CFE has no flash option of new CFE
How can i replace CFE to flash custom firmware images?
(Last edited by djcool on 9 Feb 2009, 19:35)
The content of this topic has been archived on 1 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
On startup via hyperterminal (serial) it says:
CFE 1.5 (C) Sagem but this CFE has no flash option of new CFE
How can i replace CFE to flash custom firmware images?
(Last edited by djcool on 9 Feb 2009, 19:35)
The discussion might have continued from here.