If you want to see USB Support you must enable in kernel_menuconfig:
* Bus options
** Support for PCI controller
Also to see that you must enable any other board type besides br6104k(p).
(Last edited by LAR on 29 Oct 2010, 19:26)
Topic: USB-rootfs on boot on Edimax BR-6104KP (ADM5120) [WORKS]
The content of this topic has been archived between 7 Oct 2014 and 5 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 3 of 3
Following this guide I built my distro for my Omnima's boards. Binaries and description are available on my website http://www.valeriovaccaro.it/wordpress/ … t/?lang=en
The discussion might have continued from here.
Page 3 of 3