Re: OpenWRT Kamikaze on TP-link tl-wa501g?

I was looking for a fix for my WR340GD (the wan port is dead), but after reading the tutorial for using the vxKiller FW, I'll rather try to replace the damn HST1025DR IC.

P/S: Good job xssa.

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

hi

do you know how to update md5 for TL-WA5210G firmware? i've tried following jvvh5897's method described in this thread https://forum.openwrt.org/viewtopic.php?pid=327259 but it did not work. maybe it would be possible to squeeze basic networking, ssh server and wifi driver in 1.1MB image?

328

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

Where is original firmware for it?

OpenWrt Chaos Calmer (15.05.1) TP-Link WDR4900 v2 (1x) :: LEDE trunk (r958) on TP-Link TL-WR842ND v2 (1x) / TL-WA701ND v2 (2x) :: OpenWrt Kamikaze 8.09 on TP-Link TL-WR340ND (>x10)

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

http://www.tp-link.com/en/download/TL-W … l#Firmware

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

Hi smile Can i flash xsaa openwrt or should i use this http://www.lan23.ru/forum/showthread.php?t=8630 ? My router is wr340g v 4.0
Thanks

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

http://postimg.org/gallery/3f7prmmwo/

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

Anyone ?

333

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

TL-WR340GD v4 has AR9331 so nothing to do with. You have to look at ar71 target platform.

OpenWrt Chaos Calmer (15.05.1) TP-Link WDR4900 v2 (1x) :: LEDE trunk (r958) on TP-Link TL-WR842ND v2 (1x) / TL-WA701ND v2 (2x) :: OpenWrt Kamikaze 8.09 on TP-Link TL-WR340ND (>x10)

334 (edited by Gelip 2016-08-15 07:12:26)

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

I have TP-LINK 340G V2.3 (on sticker) REV 5.4 on PCB:
http://savepic.net/8380649m.png http://savepic.net/8365289m.jpg
I read all topic and download this files:

  • wr340v5_linux.bin (tl-340g-linux_606fe38dda4014fb8f16b9b8a27cee3e.rar)

  • downgrade340.bin

  • openwrt-atheros-vmlinux.lzma

  • rootsq.rom

Please write how flash to work OpenWrt. I understand that it works only serial console and TFTP Server/Client and no work DHCP, Wifi, WebUI, SSH and RootFS is read only - right?

I need flash like in WR542G ???
https://wiki.openwrt.org/toh/tp-link/tl-wr542g#installation_of_vxkiller-image

P.S. I was programming already original firmware using SPI LPT:
http://savepic.net/8361193m.jpg

Thanks.

335

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

Mostly all instructions are given on this topic, and are duplicated on https://wiki.openwrt.org/toh/tp-link/tl … ller-image
You don't need spigm to flash. But serial console adapter cable is highly reccomended.

OpenWrt Chaos Calmer (15.05.1) TP-Link WDR4900 v2 (1x) :: LEDE trunk (r958) on TP-Link TL-WR842ND v2 (1x) / TL-WA701ND v2 (2x) :: OpenWrt Kamikaze 8.09 on TP-Link TL-WR340ND (>x10)

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

The download links (here: Kernel RootFS ) are not working anymore. Can someone post these files again?

wr340v5_linux.bin (there is only wr340v3_linux.bin)
Kernel (custom load address for kernel is 80033800)
RootFS (IP Address is 192.168.1.55 logon with root/ar2317)

337

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

files_340.zip

338 (edited by merfik1 2017-02-01 16:30:40)

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

I have got problem with wr340g v3. I 've upload wr340v3_linux.bin via website, but I didn't back it to default settings before (router IP was set to 192 168 0 9). Now its working when I connect it to router with dhcp and to pc via lan, but cannot ping and telnet 192 168 1 1, even when trying to get into redboot nothing happen... only "192 168 1 1 HOST UNREACHABLE" response, any solutions?

339 (edited by aleks-krivich 2017-02-17 08:30:07)

Re: OpenWRT Kamikaze on TP-link tl-wa501g?

Hi! Can you help me? I have wr642g with wan port broken. If it's possible i would like to use it as WiFi-repeater (to catch other router's wifi and then connect by cable to my pc). If i'm not mistaken this is it's specs wikidevi.com/wiki/TP-LINK_TL-WR642G_v3.6
Maybe model of flash and ram can be different - i don't know, but in generally like this: atheros ar2318, 2 mb flash and 8 mb ram.
I wanted to try this issue wiki.openwrt.org/toh/tp-link/tl-wr542g
But links are broken, i couldn't download images. Can you help me? Maybe you could make openwrt image exactly for my case and tasks? I would be very grateful