OpenWrt Forum Archive

Topic: WRT54GS v1.1 and SD-Card Mod Pinout.. Where to find?

The content of this topic has been archived on 28 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
kamatschka
1 May 2008, 23:16

HI!



I want to get the SD-Card working on a WRT54GS v1.1 ....


So I searched all over the Internet and can't find anything relating to a WRT54GS - SD-Card mod... All I can find is the SD-Card Mod in combination with a WRT54g....
All the Pictures showing where to solder show the WRT54G wich Board is different to the Board of a WRT54GS v1.1...


So... I need to know where to solder all the Pins from the SD-Card-Port to the PCB of the WRT54GS v1.1 ...

SO I need to know where to solder the following Pins:


http://img512.imageshack.us/img512/497/sdcardhh3.jpg


Here a Picture of the the Board from my WRT54GS v1.1:

Klick to enlarge

http://img100.imageshack.us/img100/3334/dsc00070ix3.th.jpg




Klick to enlarge:
http://img168.imageshack.us/img168/9720/dsc00072rd5.th.jpg







Thanks in advance

greetz



kamatschka

Post #2
kamatschka
17 May 2008, 19:28

Hi!?

Can someone help me to integrate the SD-Card Mod into my WRT54gs v1.1 ???



I only need to know where the PIOS are located on the board...

Post #3
routerWhacker
20 May 2008, 19:01
kamatschka wrote:

Hi!?

Can someone help me to integrate the SD-Card Mod into my WRT54gs v1.1 ???



I only need to know where the PIOS are located on the board...

the gpio util will help you find the needed gpio pins
http://forum.openwrt.org/viewtopic.php?id=15192
perhaps you can update the wiki once you're done with the mod

Post #4
vorkachev
27 Sep 2008, 06:00

I already checked all the pinouts, they are fully simmilar with wrt54g v2.2, shown in wiki

The discussion might have continued from here.