Hi boys and girls...
Searching over the net there is lack of information about the new model of the Fonera.
Ok, i've two Fon 2200, and I like it...
Thanks to it I've discovered this wonderful software and *cough* DD-WRT *cough*.
There are info about I2C for Fon 2100, but not for 2200. I want to create my own I2C module for it, using the 2 free GPIO: power and WLAN led, that are GPIO 7 and 2. I've seen that pins are three stateable, so I can port an old version of the I2C bus that I made in the past for PIC 16 family (Microchip MCU), creating a 2 wire I2C bus (without Master arbitration, that will add more difficult to all..).
I'll inform you about the progress of the project.
If someone has some info please feel free to contact me by PM.
Thanks
Topic: FON 2200 and peripherals
The content of this topic has been archived on 29 Jan 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1