OpenWrt Forum Archive

Topic: No space left on device

The content of this topic has been archived on 7 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

"No space left on device" space used 13% from USB HDD with 500GB

/HDD2# mv bhah20080104155019.r23 /HDD/ ->
mv: write error: No space left on device

root@OpenWrt:/HDD2# df -h
Filesystem                Size      Used Available Use% Mounted on
none                     14.9M     56.0k     14.8M   0% /tmp
/dev/mtdblock/4           6.0M    988.0k      5.0M  16% /mnt/jffs
mini_fo:/jffs             1.2M      1.2M         0 100% /mnt
/dev/scsi/host0/bus0/target0/lun0/disc    952.1M    624.3M    279.4M  69% /
/dev/scsi/host2/bus0/target0/lun0/part5     16.4G      8.2G      7.4G  53% /HDD2
/dev/scsi/host0/bus0/target0/lun0/disc    952.1M    624.3M    279.4M  69% /opt
/dev/scsi/host1/bus0/target0/lun0/part2    420.6G     14.1G    485.1G   4% /HDD
root@OpenWrt:/HDD2#

(Last edited by a.mOk on 5 Jan 2008, 09:40)

how i can read the i-nodes from my ext2 HDD? df -i dont workt sad

The discussion might have continued from here.