I need to merge two wired networks by a wireless link. I have two D-Link AP with OpenWRT using the acx-mac80211 driver. I know it's a buggy driver but afaik it's the only driver that brings up the wireless interface on acx-based AR7 devices.
Since I can't bridge eth0 and wlan0 in client mode, I'm trying to enable WDS but it seems not to be supported on the acx-mac80211 driver... yet.
There will be any support for WDS on acx-mac80211?
Topic: WDS with acx-mac80211
The content of this topic has been archived on 20 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1