The content of this topic has been archived on 14 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi All,
I have two fundamentals problems:
1) To create a Toolchain for m68k architecture (MCF547x SoC) for an industrial appliance.
2) If not possible, to use an external Toolchain provided from my supplier.
Does kamikaze support the usage of external Toolchain?
If the two obstacles will resolved, I think to use OpenWrt (Kamikaze) as building system for us products.
Thanks,
Luigi
I‘m looking for some solutions to settle the same problems.
A little difference, it's for my embedded platform, the ARM9 architecture CPU.
Maybe the following could be helpful.
http://wiki.openwrt.org/doc/howto/external_toolchain
The discussion might have continued from here.