OpenWrt Forum Archive

Topic: PPPoE not connect

The content of this topic has been archived on 24 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

I using latest brcm-2.4 on Asus 500gP, and have problem with connect do Internet via PPPoE. Password on username are correct because it work at OpenWrt 0.9.

syslog:

Jan  1 00:39:39 (none) daemon.info pppd[8445]: Plugin rp-pppoe.so loaded.
Jan  1 00:39:39 (none) daemon.notice pppd[8446]: pppd 2.4.3 started by root, uid 0
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: PADS: Service-Name: ''
Jan  1 00:39:39 (none) daemon.info pppd[8446]: PPP session is 481
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: using channel 11
Jan  1 00:39:39 (none) daemon.info pppd[8446]: Using interface ppp0
Jan  1 00:39:39 (none) daemon.notice pppd[8446]: Connect: ppp0 <--> eth0
Jan  1 00:39:39 (none) daemon.warn pppd[8446]: Couldn't increase MTU to 1500
Jan  1 00:39:39 (none) daemon.warn pppd[8446]: Couldn't increase MRU to 1500
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x1a385cb9>]
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: rcvd [LCP ConfReq id=0x1 <auth chap MS-v2> <mru 1480> <magic 0xe52cca19>]
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: No auth is possible
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: sent [LCP ConfRej id=0x1 <auth chap MS-v2>]
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: rcvd [LCP ConfAck id=0x1 <mru 1492> <magic 0x1a385cb9>]
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: rcvd [LCP ConfReq id=0x2 <mru 1480> <magic 0xe52cca19> <auth pap>]
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: No auth is possible
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: sent [LCP ConfRej id=0x2 <auth pap>]
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: rcvd [LCP ConfReq id=0x3 <mru 1480> <magic 0xe52cca19>]
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: sent [LCP ConfAck id=0x3 <mru 1480> <magic 0xe52cca19>]
Jan  1 00:39:39 (none) daemon.notice pppd[8446]: peer from calling number 00:0B:6B:37:C9:5E authorized
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: rcvd [LCP TermReq id=0x4 "peer refused to authenticate"]
Jan  1 00:39:39 (none) daemon.info pppd[8446]: LCP terminated by peer (peer refused to authenticate)
Jan  1 00:39:39 (none) daemon.warn pppd[8446]: Couldn't increase MTU to 1500
Jan  1 00:39:39 (none) daemon.warn pppd[8446]: Couldn't increase MRU to 1500
Jan  1 00:39:39 (none) daemon.debug pppd[8446]: sent [LCP TermAck id=0x4]
Jan  1 00:39:42 (none) daemon.notice pppd[8446]: Connection terminated.
Jan  1 00:39:42 (none) daemon.notice pppd[8446]: Modem hangup

/etc/ppp/options

#debug
noaccomp
nopcomp
nocrtscts
lock
maxfail 0

(Last edited by arteqw on 29 Apr 2007, 10:45)

I have the same router with DSL,  I have noticed if you restart the router, and wait a few seconds/minutes it will connect.

good luck

The discussion might have continued from here.