Hi@all

first of all cool board and cool software!!

i have a question about siemens se551
it is a router with atheros chipset... the wiki says that it is unsupportet because you can't load firmware..

I built a serial-cable and found out that there is a tftp-client on this router wich loads firmware from a ftfp-server and boots it!!

I am new in this topic!
The client writes :....

[Mini Loader -image must start at 0x80001000]

File transfer complete....

Loading mini-loader from 802F3F78 to 807Fc00, buffer at 80E00000 ...

firmware startup...
Stack: 0x807ff7f0
Heap: 0x807ff800

Mini-loader: Unzipping image at 80E00000 ... failed(0000001) --> If i create a zip file with winzip
or
Mini-loader: Unzipping image at 80E00000 ... failed(0000001) --> If i do not zip the file
done
Unable to run image

Can anybody help me to boot openwrt on this device????

To my information it has 16 MB ram and USB (so the image could be placed on an usb-stick)

There is already a repository with information but it is not continued anymore
http://opossum.rat.at/~anno/SE551/

I hope you can help me!!!

Roman Lumetsberger

ok i found out another way to upload code!!

i can upload code direct to memroy and execute it!!

but when i upload kamikaze elf the device restart promtly

can you help me??

Hi,

I realize this is an old topic, but did you manage to do it?
I have the same router and hooked up via serial. I can reproduce the loading of fimrware

It's not possible with only 2MB flash.