Just to continue some of the topic 51212 from the archive
CFE> attr 192.168.1.100:ras.bin
Loading 192.168.1.100:ras.bin ...
Finished loading 30172767 bytes
Flashing root file system and kernel at 0xb8020000: .............................................................................................................................................
.
*** Image flash done *** !
Resetting board in 0 seconds...HELO
CPUI
L1CI
HELO
CPUI
L1CI
4.1602A-1.0.38-116.140
DRAM
----
PHYS
STRF
400H
PHYE
DDR3
NREF
SIZ4
SIZ3
SIZ2
DINT
USYN
LSYN
MFAS
LMBE
RACE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN
Base: 4.16_02A
CFE version 1.0.38-116.140 for BCM963268 (32bit,SP,BE)
Build Date: 11/28/2014 (mandy@i7)
Copyright (C) 2000-2013 Broadcom Corporation.
Chip ID: BCM63168D0, MIPS: 400MHz, DDR: 400MHz, Bus: 200MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 134217728 bytes (128MB)
Boot Address: 0xb8000000
NAND flash device: Spansion S34ML01G1, id 0x01f1 block 128KB size 131072KB
Checking Reset button on EXT INTR 0
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host/tftp (f/h/c) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 3
Default host ramdisk file name :
Default ramdisk store address :
Board Id (0-14) : 963168VX
Number of MAC Addresses (1-32) : 12
Base MAC Address : a0:e4:cb:70:XX:XX
PSI Size (1-128) KBytes : 128
Enable Backup PSI [0|1] : 0
System Log Size (0-256) KBytes : 0
Auxillary File System Size Percent: 0
Main Thread Number [0|1] : 0
WLan Feature : 0x00
Voice Board Configuration (0-18) : SI32260
External switch id = 53125
External switch id = 700
External switch id = 0
mii_write,0x4,0x1800.
lucky~
*** Press any key to stop auto run (3 seconds) ***
Auto run second count down: 3
web info: Waiting for connection on socket 0.
CFE>
Broadcom Packet Flow Cache flushing the flows
Broadcom Packet Flow Cache flushing the flows
Chain QoSWanDefRule already exists.
Chain QoSWanDefRule already exists.
Chain QoSWanDefTag already exists.
Chain QoSWanDefTag already exists.
iptables: Chain already exists.
iptables: Chain already exists.
Broadcom Packet Flow Cache flushing the flows
5b3 remove RC_Change_httpQos. don't need do again.CMS MDM lock is held by ssk (pid=379) for 55 seconds.
Lock acquired in function cmsMdm_initWithAcc
Currently in rcl handler function for oid 138
CMS MDM lock is held by ssk (pid=379) for 55 seconds.
......
Currently in rcl handler function for oid 3007
Stopping CMS smd...
smd received Terminate msg!! Terminate all apps and then exit.
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
Sorry, rule does not exist.
wlctl: wl driver adapter not found
wlan is not finish, can't start tr69cSorry, rule does not exist.
Sorry, rule does not exist.
syslog received signal 11Sorry, rule does not exist.
General UPnP daemon is ready to run with NATT 1
Sorry, rule does not exist.
bootup received signal 15Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Unmounting filesystems...
umount: can't umount /var: Device or resource busy
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
Restarting systHELO
(bootloop).
External switch id = 53125
External switch id = 700
External switch id = 0
mii_write,0x4,0x1800.
lucky~
*** Press any key to stop auto run (3 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE> fwselect show
Version in first partition: 1.00(AAJX.8)
Get second partition fail.
*** command status = 0
CFE>
# bootloop, but then dash some keys gives a shell
Sorry, rule does not exist.
wlctl: wl driver adapter not found
Sorry, rule does not exist.
Sorry, rule does not exist.......
Enter user spacewatchdog: invalid option -- m
cp: can't stat '/etc/ppp/chat/*': No such file or directory
mkdir: can't create directory '/var/etc': File exists
Starting celld daemon......
wlctl: wl driver adapter not found
sh: can't create dev/null: nonexistent directory
Sorry, rule does not exist.
sh: can't create dev/null: nonexistent directory.......
cpoy cms-data-model.xml for reference...
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
power up etherWAN port eth4
Powered up
Success
~ # yighjghgjggjghhkhgjghhkkgjhghhkjkghkkgkghkgjhgkhhkhkghghghjjghhgghkgjgkh
~ # env
USER=root
LD_LIBRARY_PATH=/lib/public:/lib/private:/lib/gpl:/lib
HOME=/
TERM=vt102
PATH=/home/bin:/home/scripts:/opt/bin:/bin:/sbin:/usr/bin:/usr/local/jamvm/bin:/opt/scripts
SHELL=/bin/sh
PWD=/
~ #
~ # cat /proc/cmdline
root=mtd:rootfs ro rootfstype=jffs2 irqaffinity=0
~ # cat /proc/mtd
dev: size erasesize name
mtd0: 01ca0000 00020000 "rootfs"
mtd1: 00400000 00020000 "data"
mtd2: 00020000 00020000 "nvram"
mtd3: 00f00000 00020000 "customer"
~ #
~ # mtd_debug
usage: mtd_debug info <device>
mtd_debug read <device> <offset> <len> <dest-filename>
mtd_debug write <device> <offset> <len> <source-filename>
mtd_debug erase <device> <offset> <len>
~ #
~ # mount
rootfs on / type rootfs (rw)
mtd:rootfs on / type jffs2 (ro,relatime)
proc on /proc type proc (rw,relatime)
tmpfs on /var type tmpfs (rw,relatime,size=420k)
tmpfs on /mnt type tmpfs (rw,relatime,size=16k)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /log type tmpfs (rw,relatime,size=0k)
tmpfs on /home type tmpfs (rw,relatime,size=0k)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mtd:data on /data type jffs2 (rw,relatime)
mtd:customer on /customer type jffs2 (rw,relatime)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
~ #
~ # ps ax
ps: invalid option -- a
BusyBox v1.17.2 (2020-03-31 07:43:26 UTC) multi-call binary.
Usage: ps
Show list of processes
Options:
w Wide output
~ # ps w
PID USER VSZ STAT COMMAND
1 root 2444 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW [migration/0]
7 root 0 SW [migration/1]
8 root 0 SW [kworker/1:0]
9 root 0 SW [ksoftirqd/1]
10 root 0 SW [kworker/0:1]
11 root 0 SW< [khelper]
12 root 0 SW [kworker/u:1]
74 root 0 SW [sync_supers]
76 root 0 SW [bdi-default]
78 root 0 SW< [kblockd]
86 root 0 SW [khubd]
105 root 0 SW [skbFreeTask]
106 root 0 SW< [bpm]
124 root 0 SWN [kswapd0]
125 root 0 SW [fsnotify_mark]
127 root 0 SW< [crypto]
189 root 0 SW [mtdblock0]
194 root 0 SW [mtdblock1]
199 root 0 SW [mtdblock2]
204 root 0 SW [mtdblock3]
225 root 0 SW [watchdog_thread]
226 root 0 SW [kworker/1:1]
229 root 0 SW< [linkwatch]
239 root 0 SW< [deferwq]
245 root 0 SWN [jffs2_gcd_mtd1]
246 root 0 SWN [jffs2_gcd_mtd3]
270 root 0 SW [bcmFlwStatsTask]
275 root 0 SW [fapGsoLoopBk]
276 root 0 SW [kpAliveWatchdog]
286 root 0 SW [bcmsw_rx]
308 root 0 SW [bcmsw_timer]
309 root 0 SW [bcmsw]
317 root 0 SW [wfd]
329 root 0 SW [wl0-kthrd]
350 root 1096 S /bin/set_iptables
356 root 1096 S /bin/set_iptables
357 root 1096 S /bin/set_iptables
358 root 2028 S /bin/swmdk
359 root 2028 S /bin/swmdk
360 root 2028 S /bin/swmdk
361 root 2028 S /bin/swmdk
362 root 2028 S /bin/swmdk
370 root 5348 S /bin/smd
379 root 6156 S ssk
733 root 2500 S syslogd -n -L -l 7 -R (null):514 -r 7 -s 34 -b 5 -a 80
734 root 2492 S klogd -n
758 root 1432 S sntp -s (null) -s ntp1.tummy.com -t CET-1CEST,M3.5.0/1:0,M10.5.0/1:0
771 root 8180 S mcpd -m 0
780 root 1812 S dhcpd
858 root 1472 S rastatus6
860 nobody 1080 S dnsmasq
1434 root 0 SW [dsl0]
1497 root 6048 S bootup -m 0
1498 root 8160 S vcautohunt -m 0
1516 root 8160 S vcautohunt -m 0
1517 root 8160 S vcautohunt -m 0
2055 root 6624 S wlmngr -m 0
2056 root 1420 S link_updown
2057 root 7820 S celld -m 0
2058 root 5904 S watchdog -m 0
2059 root 5944 S linkstatus
2220 root 2456 S -/bin/sh
2229 root 2456 S sh
2231 root 7820 S celld -m 0
2542 root 0 Z [smd]
2553 root 2444 R ps w
~ # [ssk_main][521]there are something wrong in WLAN, still start tr69c
got SYSTEM_BOOT, adding eIEBoot to informEvList
~ # killall sntp
~ # killall vcautohunt
killall: vcautohunt: no process killed
~ # killall dhcpd
~ # killall rastatus6
~ # killall wlmngr
~ # brctl
Usage: brctl [commands]
commands:
addbr <bridge> add bridge
delbr <bridge> delete bridge
addif <bridge> <device> add interface to bridge
delif <bridge> <device> delete interface from bridge
setageing <bridge> <time> set ageing time
setbridgeprio <bridge> <prio> set bridge priority
setfd <bridge> <time> set bridge forward delay
sethello <bridge> <time> set hello time
setmaxage <bridge> <time> set max message age
setpathcost <bridge> <port> <cost> set path cost
setportprio <bridge> <port> <prio> set port priority
enableportsnooping <bridge> <value> 0-disable 1-standard 2-blocking
enableproxymode <bridge> <value> To enable 1 or disable 0
show show a list of bridges
showmacs <bridge> show a list of mac addrs
addmacs <bridge> <ifname> <mac> add mac addresses to the bridge table
delmacs <bridge> <ifname> <mac> remove mac addresses from the bridge table
deldynmacs <bridge> <ifname> remove all dynamic mac address from the bridge table
showstp <bridge> show bridge stp info
stp <bridge> {on|off} turn stp on/off
mldenableportsnooping <bridge> <value> 0-disable 1-standard 2-blocking
mldenableproxymode <bridge> <value> To enable 1 or disable 0
enableigmplan2lan <bridge> <value> 0-disable 1-enable
enablemldlan2lan <bridge> <value> 0-disable 1-enable
flows <bridge> <rxif> <txif> To setup layer 2 flows to the path (rxif->txif)
enableigmpratelimit <bridge> <value> 0-disable, 1..500-packet rate
eponuniunictrl <bridge> <value> 0-disable 1-enable
~ # brctl show
bridge name bridge id STP enabled interfaces
br0 8000.a0e4cb703700 no eth0.0
eth1.0
eth2.0
eth3.0
~ #
ras.bin:
in case you need password generator:
If for some reason you want AAJX.10
CFE: http://192.168.1.1 upload (md5sum 9d5a9149e190d34272c36ae4f1c6f5e8 (same file as mega nz link) P8702_Firmware_OEM_Stock_Url/100AAJX10D0.bin) https://drive.google.com/file/d/1Wrw5G9vwSAMzUMHPzWiaGZo6rvRDwszT/view?usp=sharing