Zyxel P2812 Bridge Mode

I have Zyxel P2812 and Tplink C2600( both Openwrt installed)
I would like to use it in bridge mode(p2812) and want it to be accessible. (I couldn't access the modem when using in the stock software as bridge mode.) How do i do?

Thanks a lot.

It's a short in the dark as I don't have an xDSL device running OpenWrt, so I don't know how that part of the firmware looks like, but my best guess would be that you don't bridge all of your LAN port with the xDSL, but only one port, so that you can access the device through the rest of the ports.

https://openwrt.org/docs/guide-user/network/wan/bridge-mode
https://openwrt.org/docs/guide-user/network/wan/access.modem.through.nat

1 Like