If I download some stuff over 2 GB, the wi-fi drops down by itself. Does it happen to you at all? Is it a hardware failure? I am on 24.10.1, Zyxel P-2812. I have tried 3 devices and all of them do that.
Btw it was on 40mhz, I set it to 20mhz. It seems to not do that anymore. I thoroughly tested this device even before on the stock firmware.
Can you clarify what this statement means with more detail?
Wi-Fi SSID is no more, then it starts to be seen again.
Can you provide any relevant logs and the wireless config?
Btw it was on 40mhz, I set it to 20mhz. It seems to not do that anymore. I thoroughly tested this device even before on the stock firmware.
Serial logs are like this meanwhile this happening, does this work:
207.857503] br-lan: port 5(phy0-ap0) entered disabled state
[ 207.863326] rt2800pci 0000:00:0e.0 phy0-ap0: entered allmulticast mode
[ 207.870507] rt2800pci 0000:00:0e.0 phy0-ap0: entered promiscuous mode
[ 207.880148] gswip 1e108000.switch: port 2 failed to delete 00:0c:43:30:62:002
[ 207.887520] gswip 1e108000.switch: port 4 failed to delete 00:0c:43:30:62:002
[ 207.919464] gswip 1e108000.switch: port 0 failed to delete 00:0c:43:30:62:002
[ 207.936714] gswip 1e108000.switch: port 1 failed to delete 00:0c:43:30:62:002
[ 207.960456] gswip 1e108000.switch: port 2 failed to delete 00:0c:43:30:62:002
[ 207.967850] gswip 1e108000.switch: port 4 failed to delete 00:0c:43:30:62:002
[ 207.993492] gswip 1e108000.switch: port 0 failed to add 00:0c:43:30:62:00 vi2
[ 208.020465] gswip 1e108000.switch: port 1 failed to add 00:0c:43:30:62:00 vi2
[ 208.027496] gswip 1e108000.switch: port 2 failed to add 00:0c:43:30:62:00 vi2
[ 208.070106] gswip 1e108000.switch: port 4 failed to add 00:0c:43:30:62:00 vi2
[ 208.077162] gswip 1e108000.switch: port 0 failed to add 00:0c:43:30:62:00 vi2
[ 208.095672] gswip 1e108000.switch: port 1 failed to add 00:0c:43:30:62:00 vi2
[ 208.103914] gswip 1e108000.switch: port 2 failed to add 00:0c:43:30:62:00 vi2
[ 208.124235] gswip 1e108000.switch: port 4 failed to add 00:0c:43:30:62:00 vi2
[ 217.585617] br-lan: port 5(phy0-ap0) entered blocking state
[ 217.589782] br-lan: port 5(phy0-ap0) entered forwarding state
[ 235.818818] rt2800pci 0000:00:0e.0 phy0-ap0: left allmulticast mode
[ 235.824287] rt2800pci 0000:00:0e.0 phy0-ap0: left promiscuous mode
[ 235.830336] br-lan: port 5(phy0-ap0) entered disabled state
[ 235.872286] gswip 1e108000.switch: port 0 failed to delete 00:0c:43:30:62:002
[ 235.879627] gswip 1e108000.switch: port 1 failed to delete 00:0c:43:30:62:002
[ 235.889311] gswip 1e108000.switch: port 2 failed to delete 00:0c:43:30:62:002
[ 235.898456] gswip 1e108000.switch: port 4 failed to delete 00:0c:43:30:62:002
[ 235.908919] gswip 1e108000.switch: port 0 failed to delete 00:0c:43:30:62:002
[ 235.917121] gswip 1e108000.switch: port 1 failed to delete 00:0c:43:30:62:002
[ 235.925800] gswip 1e108000.switch: port 2 failed to delete 00:0c:43:30:62:002
[ 235.934594] gswip 1e108000.switch: port 4 failed to delete 00:0c:43:30:62:002
[ 236.897000] br-lan: port 5(phy0-ap0) entered blocking state
[ 236.901313] br-lan: port 5(phy0-ap0) entered disabled state
[ 236.906819] rt2800pci 0000:00:0e.0 phy0-ap0: entered allmulticast mode
[ 236.914130] rt2800pci 0000:00:0e.0 phy0-ap0: entered promiscuous mode
[ 236.922139] gswip 1e108000.switch: port 0 failed to add 00:0c:43:30:62:00 vi2
[ 236.929130] gswip 1e108000.switch: port 1 failed to add 00:0c:43:30:62:00 vi2
[ 236.980145] gswip 1e108000.switch: port 2 failed to add 00:0c:43:30:62:00 vi2
[ 236.987197] gswip 1e108000.switch: port 4 failed to add 00:0c:43:30:62:00 vi2
[ 237.025014] gswip 1e108000.switch: port 0 failed to add 00:0c:43:30:62:00 vi2
[ 237.050882] gswip 1e108000.switch: port 1 failed to add 00:0c:43:30:62:00 vi2
[ 237.057962] gswip 1e108000.switch: port 2 failed to add 00:0c:43:30:62:00 vi2
[ 237.080281] gswip 1e108000.switch: port 4 failed to add 00:0c:43:30:62:00 vi2
[ 238.622656] br-lan: port 5(phy0-ap0) entered blocking state
[ 238.626870] br-lan: port 5(phy0-ap0) entered forwarding state