Zyxel Keenetic Omni

Installing and Using OpenWrt
1

After flashing the router does not respond.

2

What version did you install?
What way did you flash it?
Have you tried to ssh to it? And what IP did you ssh to?

3

Hi,
I did the firmware on the profile keenetic omni, then tried the snapshot version.
The router was flashed using tftp.
Dhcp on the router is not working, ping not responding. Ssh not responding too.

Now I use the firmware made a profile for Asus rt-n14u, but the configuration of ports and leds are not suitable.

4

Fixed it!!!!

5

But now in system log the error occurred

Tue Jan 17 10:24:48 2017 kern.err kernel: [  958.878990] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Tue Jan 17 10:24:48 2017 kern.err kernel: [  958.897401] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Tue Jan 17 10:24:48 2017 kern.err kernel: [  958.915810] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Tue Jan 17 10:24:48 2017 kern.err kernel: [  958.934217] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Tue Jan 17 10:24:48 2017 kern.err kernel: [  958.952628] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Tue Jan 17 10:24:48 2017 kern.err kernel: [  958.971037] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
6

The error appears if to use omcproxy (for iptv). How to solve this problem?

7

The problem was solved. Error appeared because of the disabled igmp snooping.

8

Hi, ethos!

Please, tell how did you fix OpenWRT firmware on Keenetic Omni? I've recently flashed 17.01.4 from the openwrt.org site on Keenetic Omni II and it turned into brick. No response, DHCP server is not working...