Currently I have been trying to get OpenWrt to work on the ZyXEL C1100Z but it is not working. I cannot tell if I messed something up or not. The stock Firmware is normally around 16000KB, but OpenWrt is around 6505856B or something like that. This should not be a problem since it should have 120MB of space, but the chip says it has 1GB of space, (I believe it is 120MB since that is what the router says). I want to say it has 128MB of ram, except I do not remember. I know it uses the JFFS2 filesystem, except I do not know how to select that, unless I already selected it.
This device HAS to be updated through CFE, since it is normally a CenturyLink router. Through CFE, the Command ATEN 1 10F0A563 will give I believe ALL CFE commands.
My issue is, I am not positive I have added all the things it needs, but currently I have a bigger issue. It won't install.
CFE> atur
Starting XMODEM upload (CRC mode)....
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Receive completed, start to write flash...
OK
Total 6505856 (0x634580)bytes received
Firmware tag version [0] is not compatible with the current Tag version [6].
Wait, It may not be 16mb for the stock firmware, I think it was actually around the 160mb mark.