cat /proc/mtd
gives:
dev: size erasesize name
and
fw_printenv
read failed about /sys/bus/nvmem/devices/nvmem0/of_node/compatible
Cannot parse config file '/etc/fw_env.config': No such file or directory
Failed to find NVMEM device
I found a file into the official repo mentioning eMMC, maybe it helps to integrate into the custom image of the frimware selector. The file is
And I also have two files of configurations from ZBT original installer.
/etc/kernel.config
/etc/opewrt.config
any help about my problem? thanks
You won't get any further without serial.
ok, thanks. As soon I solve the dispute with the vendor, I will know if I can open the case.
frollic, I just discovered there is a .bin file working with the eMMC version. But I don't know where it come from. Any chance to find it in the openwrt.org official repo?
Here is the link
ciao Frollic,
I finally get a serial output of booting.
Welcome to minicom 2.9
OPTIONS: I18n
Compiled on May 3 2024, 16:19:02.
Port /dev/ttyUSB0, 12:49:50
Press CTRL-A Z for help on special keys
F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 103F 0000
F3: 1006 0033 [0200]
F3: 4001 00E0 [0200]
F3: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [2000]
T0: 0000 02C4 [010F]
Jump to BL
NOTICE: BL2: v2.6(release):1e58996-dirty
NOTICE: BL2: Built : 00:49:17, Mar 21 2023
NOTICE: WDT: disabled
NOTICE: EMI: Using DDR4 settings
dump toprgu registers data:
1001c000 | 00000000 0000ffe0 00000000 00000000
1001c010 | 00000fff 00000000 00f00000 00000000
1001c020 | 00000000 00000000 00000000 00000000
1001c030 | 003c0003 003c0003 00000000 00000000
1001c040 | 00000000 00000000 00000000 00000000
1001c050 | 00000000 00000000 00000000 00000000
1001c060 | 00000000 00000000 00000000 00000000
1001c070 | 00000000 00000000 00000000 00000000
1001c080 | 00000000 00000000 00000000 00000000
dump drm registers data:
1001d000 | 00000000 00000000 00000000 00000000
1001d010 | 00000000 00000000 00000000 00000000
1001d020 | 00000000 00000000 00000000 00000000
1001d030 | 00a083f1 000003ff 00100000 00000000
1001d040 | 00000000 00000000 00020303 000000ff
1001d050 | 00000000 00000000 00000000 00000000
1001d060 | 00000002 00000000 00000000 00000000
drm: 500 = 0x8
[DDR Reserve] ddr reserve mode not be enabled yet
DDR RESERVE Success 0
[EMI] ComboMCP not ready, using default setting
BYTE_swap:0
BYTE_swap:0
Window Sum 584, worse bit 0, min window 72
Window Sum 580, worse bit 8, min window 72
[TxChooseVref] Worse bit 6, Min win 24, Win sum 416, Final Vref 34
Window Sum 188, worse bit 5, min window 12
Window Sum 224, worse bit 10, min window 18
Window Sum 242, worse bit 5, min window 20
Window Sum 256, worse bit 10, min window 22
Window Sum 274, worse bit 3, min window 26
Window Sum 278, worse bit 10, min window 28
Window Sum 298, worse bit 5, min window 28
Window Sum 306, worse bit 10, min window 34
Window Sum 318, worse bit 3, min window 34
Window Sum 322, worse bit 10, min window 36
Window Sum 340, worse bit 5, min window 38
Window Sum 338, worse bit 10, min window 36
Window Sum 360, worse bit 3, min window 42
Window Sum 352, worse bit 10, min window 40
Window Sum 372, worse bit 3, min window 42
Window Sum 372, worse bit 10, min window 42
Window Sum 384, worse bit 2, min window 46
Window Sum 384, worse bit 10, min window 44
Window Sum 398, worse bit 2, min window 48
Window Sum 394, worse bit 10, min window 44
Window Sum 414, worse bit 3, min window 48
Window Sum 410, worse bit 10, min window 48
Window Sum 424, worse bit 2, min window 50
Window Sum 418, worse bit 10, min window 48
Window Sum 432, worse bit 3, min window 50
Window Sum 432, worse bit 10, min window 50
Window Sum 446, worse bit 2, min window 54
Window Sum 442, worse bit 10, min window 52
Window Sum 452, worse bit 2, min window 54
Window Sum 450, worse bit 10, min window 54
Window Sum 464, worse bit 3, min window 56
Window Sum 462, worse bit 8, min window 56
Window Sum 466, worse bit 3, min window 56
Window Sum 466, worse bit 10, min window 56
Window Sum 470, worse bit 1, min window 56
Window Sum 474, worse bit 8, min window 58
NOTICE: EMI: Detected DRAM size: 1024MB
NOTICE: EMI: complex R/W mem test passed
NOTICE: CPU: MT7981 (1300MHz)
NOTICE: BL2: Booting BL31
NOTICE: BL31: v2.7(release):
NOTICE: BL31: Built : 02:40:01, Nov 22 2023
NOTICE: Hello BL31!!!
U-Boot 2023.07 (Nov 22 2023 - 02:35:10 -0800)
CPU: MediaTek MT7981
Model: mt7981-rfb
(mediatek,mt7981-rfb)
DRAM: 1 GiB
Core: 42 devices, 17 uclasses, devicetree: separate
MMC: mmc@11230000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@11002000
Out: serial@11002000
Err: serial@11002000
Net:
Warning: ethernet@15100000 (eth0) using random MAC address - 7a:6a:20:d7:6e:f1
eth0: ethernet@15100000
*** U-Boot Boot Menu ***
1. Startup system (Default)
2. Upgrade firmware
3. Upgrade ATF BL2
4. Upgrade ATF FIP
5. Upgrade ATF BL31 only
6. Upgrade bootloader only
7. Upgrade partition table
8. Upgrade single image
9. Load image
a. Start Web failsafe
0. U-Boot console
Press UP/DOWN to move, ENTER to select, ESC to quit
Reading from 0x880000 to 0x46000000, size 0x200 ... OK
Reading from 0x880000 to 0x46000000, size 0x335fc7 ... OK
## Loading kernel from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-5.4.213
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x460000e8
Data Size: 3347914 Bytes = 3.2 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x48080000
Entry Point: 0x48080000
Hash algo: crc32
Hash value: 3effa587
Hash algo: sha1
Hash value: 9d385279e070ca0a7a377dc0c916b9613502191a
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt z8102ax-emmc device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x463317f0
Data Size: 16894 Bytes = 16.5 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 4a148803
Hash algo: sha1
Hash value: 31dc14983ef24b06aaa6a8a817508735d209c60e
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x463317f0
Working FDT set to 463317f0
Uncompressing Kernel Image
Loading Device Tree to 000000007f7f1000, end 000000007f7f81fd ... OK
Working FDT set to 7f7f1000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.213 (compile@ubuntu) (gcc version 8.4.0 (OpenW3
[ 0.000000] Machine model: ZBT-Z8102AX-eMMC
[ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] On node 0 totalpages: 261200
[ 0.000000] DMA32 zone: 4096 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 261200 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 20 pages/cpu s43992 r8192 d29736 u81920
[ 0.000000] pcpu-alloc: s43992 r8192 d29736 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel conn
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257104
[ 0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 s
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, l)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1014472K/1044800K available (6910K kernel code, 444K rwd)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[ 0.000003] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398s
[ 0.008195] Calibrating delay loop (skipped), value calculated using timer f)
[ 0.018516] pid_max: default: 32768 minimum: 301
[ 0.023244] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, lin)
[ 0.030683] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.039470] ASID allocator initialised with 65536 entries
[ 0.044975] rcu: Hierarchical SRCU implementation.
[ 0.050085] smp: Bringing up secondary CPUs ...
[ 0.054969] Detected VIPT I-cache on CPU1
[ 0.054989] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.055012] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.055075] smp: Brought up 1 node, 2 CPUs
[ 0.076690] SMP: Total of 2 processors activated.
[ 0.081416] CPU features: detected: 32-bit EL0 Support
[ 0.086578] CPU features: detected: CRC32 instructions
[ 0.091849] CPU: All CPU(s) started at EL2
[ 0.095972] alternatives: patching kernel code
[ 0.102660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[ 0.112472] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.119372] pinctrl core: initialized pinctrl subsystem
[ 0.125289] NET: Registered protocol family 16
[ 0.129999] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.152079] SCSI subsystem initialized
[ 0.156026] libata version 3.00 loaded.
[ 0.160137] usbcore: registered new interface driver usbfs
[ 0.165724] usbcore: registered new interface driver hub
[ 0.171103] usbcore: registered new device driver usb
[ 0.176980] Bluetooth: Core ver 2.22
[ 0.180627] NET: Registered protocol family 31
[ 0.185099] Bluetooth: HCI device and connection manager initialized
[ 0.191490] Bluetooth: HCI socket layer initialized
[ 0.196392] Bluetooth: L2CAP socket layer initialized
[ 0.201474] Bluetooth: SCO socket layer initialized
[ 0.206610] rbus 18000000.wbsys: PCI host bridge to bus 0000:00
[ 0.212576] pci_bus 0000:00: root bus resource [mem 0x18000000-0x18ffffff]
[ 0.219488] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.225000] pci_bus 0000:00: scanning bus
[ 0.229040] pci 0000:00:00.0: [14c3:7981] type 00 class 0x000280
[ 0.235086] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit]
[ 0.241910] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f]
[ 0.248209] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f]
[ 0.254509] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f]
[ 0.260808] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f]
[ 0.267938] pci_bus 0000:00: fixups for bus
[ 0.272153] pci_bus 0000:00: bus scan returning with max=00
[ 0.278580] clocksource: Switched to clocksource arch_sys_counter
[ 0.285382] thermal_sys: Registered thermal governor 'fair_share'
[ 0.285390] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.291532] thermal_sys: Registered thermal governor 'step_wise'
[ 0.297570] thermal_sys: Registered thermal governor 'user_space'
[ 0.303605] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.309972] NET: Registered protocol family 2
[ 0.321035] IP idents hash table entries: 16384 (order: 5, 131072 bytes, lin)
[ 0.328954] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192)
[ 0.337372] TCP established hash table entries: 8192 (order: 4, 65536 bytes,)
[ 0.345205] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linea)
[ 0.352555] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.359026] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.365696] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.372901] NET: Registered protocol family 1
[ 0.377305] PCI: CLS 0 bytes, default 64
[ 0.382050] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.391375] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.397261] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI.
[ 0.419949] phy phy-usb-phy@11e10000.1: type_sw - reg 0x218, index 0
[ 0.426957] gpio-export gpio-export: 5 gpio(s) exported
[ 0.441209] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 0.448275] printk: console [ttyS0] disabled
[ 0.472685] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 12, base_baud =2
[ 0.481900] printk: console [ttyS0] enabled
[ 0.481900] printk: console [ttyS0] enabled
[ 0.490259] printk: bootconsole [uart8250] disabled
[ 0.490259] printk: bootconsole [uart8250] disabled
[ 0.500583] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.508952] loop: module loaded
[ 0.512231] mediatek,mt2701-ice_debug ice_debug: get dbg_sel clock fail: -2
[ 0.519196] mediatek,mt2701-ice_debug: probe of ice_debug failed with error 2
[ 0.527886] [mtk_hw_init] reset_lock:0, force:0
[ 0.532450] [mtk_hw_init] execute fe cold reset
[ 0.568717] mtk_soc_eth 15100000.ethernet: generated random MAC address 36:e6
[ 0.577221] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xf5
[ 0.586311] mtk_soc_eth 15100000.ethernet: generated random MAC address aa:e1
[ 0.594764] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xf5
[ 0.603813] (unnamed net_device) (dummy): netif_napi_add() called with weigh6
[ 0.611503] usbcore: registered new interface driver sierra_net
[ 0.617584] xhci-mtk 11200000.xhci: 11200000.xhci supply vbus not found, usir
[ 0.626239] xhci-mtk 11200000.xhci: 11200000.xhci supply vusb33 not found, ur
[ 0.635129] phy phy-usb-phy@11e10000.0: try to get sw efuse
[ 0.640704] phy phy-usb-phy@11e10000.1: try to get sw efuse
[ 0.646268] phy phy-usb-phy@11e10000.1: try to get sw efuse+
[ 0.651942] phy phy-usb-phy@11e10000.1: u3 efuse - intr 28, rx_imp f, tx_impf
[ 0.659195] phy_efuse_set set efuse, tx_imp f, rx_imp f intr 28
[ 0.665191] xhci-mtk 11200000.xhci: xHCI Host Controller
[ 0.670538] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus num1
[ 0.681002] xhci-mtk 11200000.xhci: hcc params 0x01403f99 hci version 0x110 0
[ 0.690246] xhci-mtk 11200000.xhci: irq 84, io mem 0x11200000
[ 0.696450] hub 1-0:1.0: USB hub found
[ 0.700228] hub 1-0:1.0: 1 port detected
[ 0.704420] xhci-mtk 11200000.xhci: xHCI Host Controller
[ 0.709740] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus num2
[ 0.717220] xhci-mtk 11200000.xhci: Host supports USB 3.2 Enhanced SuperSpeed
[ 0.724398] usb usb2: We don't know the algorithms for LPM for this host, di.
[ 0.732816] hub 2-0:1.0: USB hub found
[ 0.736598] hub 2-0:1.0: 1 port detected
[ 0.741014] usbcore: registered new interface driver uas
[ 0.746412] usbcore: registered new interface driver usb-storage
[ 0.752522] i2c /dev entries driver
[ 0.756947] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, now)
[ 0.764936] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-m
[ 0.773504] Bluetooth: HCI UART driver ver 2.3
[ 0.777966] Bluetooth: HCI UART protocol H4 registered
[ 0.783095] Bluetooth: HCI UART protocol BCSP registered
[ 0.788484] Bluetooth: HCI UART protocol Broadcom registered
[ 0.794156] Bluetooth: HCI UART protocol QCA registered
[ 0.824554] NET: Registered protocol family 10
[ 0.829693] Segment Routing with IPv6
[ 0.833548] NET: Registered protocol family 17
[ 0.838036] Bridge firewalling registered
[ 0.842183] 8021q: 802.1Q VLAN Support v1.8
[ 0.905274] mmc0: new high speed MMC card at address 0001
[ 0.915364] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 0.920633] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 0.927264] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 0.933256] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (250:)
[ 0.941910] GPT:Primary header thinks Alt. header is not at the end of the d.
[ 0.949315] GPT:1 != 15269887
[ 0.952274] GPT:Alternate GPT header not at the end of the disk.
[ 0.958268] GPT:1 != 15269887
[ 0.961226] GPT: Use GNU Parted to correct GPT errors.
[ 0.966379] mmcblk0: p1 p2 p3 p4 p5 p6
[ 1.066868] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:00] driver]
[ 1.076444] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:01] driver]
[ 1.085993] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:02] driver]
[ 1.095546] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:03] driver]
[ 1.104448] mt7530 mdio-bus:1f: configuring for fixed/2500base-x link mode
[ 1.111617] DSA: tree 0 setup
[ 1.111865] mt7530 mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/x
[ 1.114769] hctosys: unable to open rtc device (rtc0)
[ 1.128886] VFS: Mounted root (squashfs filesystem) readonly on device 179:6.
[ 1.130606] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[ 1.136217] Freeing unused kernel memory: 448K
[ 1.162620] Run /sbin/init as init process
[ 1.290763] hub 1-1:1.0: USB hub found
[ 1.294785] hub 1-1:1.0: 4 ports detected
[ 1.327463] init: Console is alive
[ 1.330973] init: - watchdog -
[ 1.414718] usb 2-1: new SuperSpeed Gen 1x2 USB device number 2 using xhci-mk
[ 1.447110] hub 2-1:1.0: USB hub found
[ 1.451659] hub 2-1:1.0: 4 ports detected
[ 1.949275] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.991121] conninfra@(mtk_conninfra_drv_init:644) Before platform_driver_rer
[ 1.998812] Get Index(0-TOP_MISC_BASE) phy_addr(0x11d10000) vir_addr=(0xffff)
[ 2.008201] Get Index(1-TOPRGU_BASE) phy_addr(0x1001c000) vir_addr=(0xffffff)
[ 2.017409] Get Index(2-GPIO_BASE) phy_addr(0x11d00000) vir_addr=(0xffffffc0)
[ 2.026442] Get Index(3-IOCFG_TR_BASE) phy_addr(0x11f00000) vir_addr=(0xffff0) size=(0x1000)
[ 2.035826] Get Index(4-IOCFG_TL_BASE) phy_addr(0x11f10000) vir_addr=(0xffff)
[ 2.045207] Get Index(5-INFRACFG_AO_BASE) phy_addr(0x10003000) vir_addr=(0xf)
[ 2.054847] Get Index(6-CONN_INFRA_CFG_BASE) phy_addr(0x18001000) vir_addr=()
1-399
[ 2.045207] Get Index(5-INFRACFG_AO_BASE) phy_addr(0x10003000) vir_addr=(0xf)
[ 2.054847] Get Index(6-CONN_INFRA_CFG_BASE) phy_addr(0x18001000) vir_addr=()
[ 2.064753] Get Index(7-CONN_INFRA_SYSRAM_BASE) phy_addr(0x18050000) vir_add)
[ 2.074917] Get Index(8-CONN_INFRA_CLKGEN_ON_TOP_BASE) phy_addr(0x18009000) vir_addr=(0xffffffc010b19000))
[ 2.085686] Get Index(9-CONN_HOST_CSR_TOP_BASE) phy_addr(0x18060000) vir_add)
[ 2.095848] Get Index(10-CONN_INFRA_BUS_CR_BASE) phy_addr(0x1800e000) vir_ad)
[ 2.106096] Get Index(11-CONN_INFRA_RGU_BASE) phy_addr(0x18000000) vir_addr=)
[ 2.116085] Get Index(12-CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18005000) vir_addr=(0xffffffc010b71000) size=(0x1000)
[ 2.126507] Get Index(13-INST2_CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18085000)
[ 2.137449] Get Index(14-CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18004000) vir_)
[ 2.147871] Get Index(15-INST2_CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18084000)
[ 2.158814] Get Index(16-CONN_SEMAPHORE_BASE) phy_addr(0x18070000) vir_addr=(0xffffffc010bc0000) size=(0x10000)
[ 2.168891] Get Index(17-CONN_AFE_CTL_BASE) phy_addr(0x18003000) vir_addr=(0)
[ 2.178706] Get Index(18-CONN_AFE_CTL_2ND_BASE) phy_addr(0x18083000) vir_add)
[ 2.188867] Get Index(19-WF_TOP_SLPPROT_ON_BASE) phy_addr(0x184c0000) vir_ad)
[ 2.199202] Get Index(20-WF_TOP_CFG_BASE) phy_addr(0x184b0000) vir_addr=(0xf010b89000) size=(0x1000)
[ 2.208843] Get Index(21-WF_MCU_CONFIG_LS_BASE) phy_addr(0x184f0000) vir_add)
[ 2.219004] Get Index(22-WF_MCU_BUS_CR_BASE) phy_addr(0x18400000) vir_addr=()
[ 2.228905] Get Index(23-WF_MCUSYS_INFRA_BUS_FULL_U_DEBUG_CTRL_AO_BASE) phy_)
[ 2.241150] Get Index(24-WF_TOP_CFG_ON_BASE) phy_addr(0x184c0000) vir_addr=(size=(0x10000)
[ 2.251137] conninfra@(consys_plt_hw_init:162) adie_cfg_type = 1, one_adie_d1
[ 2.258786] [emi_mng_init] gConEmiPhyBase = [0x47c80000] size = [0x100000] f]
[ 2.269568] conninfra@(mtk_conninfra_drv_init:650) After platform_driver_regr
[ 2.277454] ConnInfra Dev: init (0)
[ 2.282398] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP ve)
[ 2.292262] conninfra@(connsys_d_die_cfg:365) D-die efuse: 0x00000000
[ 2.299718] conninfra@(_connsys_a_die_cfg_7976:919) adie_idx[0], A-die CHIP 0
[ 2.310537] conninfra@(consys_spi_write_nolock:501) addr=0x0a00, val=0xffffff
[ 2.318838] conninfra@(consys_spi_write_nolock:501) addr=0x04ac, val=0x00000c
[ 2.327141] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x000002
[ 2.336450] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x000000
[ 2.345761] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x43a60000
[ 2.359101] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000]
[ 2.370611] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x000002
[ 2.379920] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a60a
[ 2.389229] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63a70a
[ 2.402569] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000]
[ 2.414079] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x000002
[ 2.423388] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a70a
[ 2.432697] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63ac0a
[ 2.446035] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000]
[ 2.457548] conninfra@(consys_spi_write_nolock:501) addr=0x0038, val=0x4a5630
[ 2.465849] conninfra@(consys_spi_write_nolock:501) addr=0x065c, val=0x1d590f
[ 2.474151] conninfra@(consys_spi_write_nolock:501) addr=0x0664, val=0x34c000
[ 2.482455] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x888885
[ 2.491715] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x000005
[ 2.499951] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP ve)
[ 2.509762] conninfra@(_consys_hw_conninfra_wakeup:470) conninfra_wakeup ref!
[ 2.518625] conninfra@(_consys_hw_conninfra_sleep:490) conninfra_sleep refcn!
[ 2.527223] conninfra@(opfunc_power_on_internal:241) [Conninfra Pwr On] BT=[]
[ 2.551497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.558788] ehci-fsl: Freescale EHCI Host controller driver
[ 2.565047] ehci-platform: EHCI generic platform driver
[ 2.571636] ehci-pci: EHCI PCI platform driver
[ 2.577078] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.583888] ohci-platform: OHCI generic platform driver
[ 2.589830] ohci-pci: OHCI PCI platform driver
[ 2.597989] mediatek_soc_hnat 15100000.hnat: wan = eth1
[ 2.603243] mediatek_soc_hnat 15100000.hnat: lan = lan
[ 2.608380] mediatek_soc_hnat 15100000.hnat: ppd = eth0
[ 2.613597] mediatek_soc_hnat 15100000.hnat: gmac num = 2
[ 2.618987] mediatek_soc_hnat 15100000.hnat: ppe num = 1
[ 2.624726] mediatek_soc_hnat 15100000.hnat: PPE0 entry number = 8192
[ 2.641518] mediatek_soc_hnat 15100000.hnat: PPE0 hwnat start
[ 2.647317] hnat roaming work enable
[ 2.653903] warp_module_init(): module init and register callback for warp
[ 2.660802] create warp_ctrl ok!!!
[ 2.664243] wed_get_slot_map(): assign slot_id:0 for entry: 0!
[ 2.670082] wed_get_slot_map(): assign slot_id:1 for entry: 1!
[ 2.676426] kmodloader: done loading kernel modules from /etc/modules-boot.d*
[ 2.689148] init: - preinit -
[ 2.928509] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500bae
[ 2.936867] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - x
[ 2.951633] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 2.958756] 8021q: adding VLAN 0 to HW filter on device lan1
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 7.047660] mount_root: loading kmods from internal overlay
[ 7.064267] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 7.072972] kmodloader: done loading kernel modules from //etc/modules-boot.*
[ 7.231293] block: attempting to load /etc/config/fstab
[ 7.237936] block: unable to load configuration (fstab: Entry not found)
[ 7.244675] block: no usable configuration
[ 7.271610] random: procd: uninitialized urandom read (4 bytes read)
[ 7.438306] F2FS-fs (loop0): Mounted with checkpoint version = 8f5dcca
[ 7.445200] mount_root: loading kmods from internal overlay
[ 7.460202] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/m*
[ 7.468846] kmodloader: done loading kernel modules from /tmp/overlay/upper/*
[ 7.529753] block: attempting to load /etc/config/fstab
[ 7.535072] block: unable to load configuration (fstab: Entry not found)
[ 7.541785] block: no usable configuration
[ 7.546563] mount_root: switching to f2fs overlay
[ 7.553125] overlayfs: "xino" feature enabled using 32 upper inode bits.
[ 7.561183] urandom-seed: Seeding with /etc/urandom.seed
[ 7.603076] procd: - early -
[ 7.605985] procd: - watchdog -
[ 8.129226] procd: - watchdog -
[ 8.158678] procd: - ubus -
[ 8.204856] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.211948] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.220805] procd: - init -
[ 8.338240] fuse: init (API version 7.31)
[ 8.451810] F2FS-fs (mmcblk0p5): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 8.459663] F2FS-fs (mmcblk0p5): Can't find valid F2FS filesystem in 1th supk
[ 8.462101] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.467726] F2FS-fs (mmcblk0p5): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 8.481474] F2FS-fs (mmcblk0p5): Can't find valid F2FS filesystem in 2th supk
[ 8.513034] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.519582] random: ubus: uninitialized urandom read (4 bytes read)
[ 8.609086] urngd: v1.0.2 started.
[ 8.626521] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.641452] random: crng init done
[ 8.644885] random: 20 urandom warning(s) missed due to ratelimiting
[ 8.682804] RPC: Registered named UNIX socket transport module.
[ 8.688766] RPC: Registered udp transport module.
[ 8.693485] RPC: Registered tcp transport module.
[ 8.698198] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.700134] /dev/mmcblk0boot0: Can't open blockdev
[ 8.711771] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 8.715609] F2FS-fs (mmcblk0boot0): Magic Mismatch, valid(0xf2f52010) - read)
[ 8.724852] F2FS-fs (mmcblk0boot0): Can't find valid F2FS filesystem in 1th k
[ 8.733206] F2FS-fs (mmcblk0boot0): Magic Mismatch, valid(0xf2f52010) - read)
[ 8.741328] F2FS-fs (mmcblk0boot0): Can't find valid F2FS filesystem in 2th k
[ 8.755578] l2tp_core: L2TP core driver, V2.0
[ 8.761122] l2tp_netlink: L2TP netlink interface
[ 8.768306] gre: GRE over IPv4 demultiplexor driver
[ 8.774235] ip_gre: GRE over IPv4 tunneling driver
[ 8.784688] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.818907] GACT probability on
[ 8.822895] Mirror/redirect action on
[ 8.832709] u32 classifier
[ 8.835467] input device check on
[ 8.839150] Actions configured
[ 8.849034] GobiNet: Meig_GobiNet_Driver_V1.4.2
[ 8.853689] usbcore: registered new interface driver GobiNet
[ 8.860873] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.3
[ 8.866997] usbcore: registered new interface driver GobiNet_q
[ 8.875117] usbcore: registered new interface driver cdc_acm
[ 8.880797] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
[ 8.889626] usbcore: registered new interface driver cdc_ether
[ 8.896671] usbcore: registered new interface driver cdc_ncm
[ 8.903421] usbcore: registered new interface driver cdc_wdm
[ 8.916240] Current mapfilter version v3.0.1.2
[ 8.960348] F2FS-fs (mmcblk0p3): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 8.968199] F2FS-fs (mmcblk0p3): Can't find valid F2FS filesystem in 1th supk
[ 8.976313] F2FS-fs (mmcblk0p3): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 8.984184] F2FS-fs (mmcblk0p3): Can't find valid F2FS filesystem in 2th supk
[ 9.248698] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 9.256469] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 1th supk
[ 9.275760] F2FS-fs (mmcblk0p1): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 9.282993] F2FS-fs (mmcblk0p1): Can't find valid F2FS filesystem in 2th supk
[ 9.595802] mmcblk0p6: Can't mount, would change RO state
[ 9.830245] mt_wifi: module license 'Proprietary' taints kernel.
[ 9.836290] Disabling lock debugging due to kernel taint
[ 9.884522] conninfra@(conninfra_pwr_on:120) [conninfra_pwr_on] drv=[3]
[ 9.892138] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP ve)
[ 9.909998] Adie Type: 0x7976
[ 9.910001] SKU Type: 3000
[ 9.913918] conninfra@(opfunc_power_on_internal:241) [Conninfra Pwr On] BT=[]
[ 9.928031] WiFi@C12L1,get_dbg_setting_by_profile() 4242: debug level settin!
[ 9.937878] WiFi@C12L1,get_dbg_setting_by_profile() 4265: debug option setti!
[ 9.938539] /dev/mmcblk0boot1: Can't open blockdev
[ 9.947954] mt_rbus 0000:00:00.0: runtime IRQ mapping not provided by arch
[ 9.957358] F2FS-fs (mmcblk0boot1): Magic Mismatch, valid(0xf2f52010) - read)
[ 9.967046] F2FS-fs (mmcblk0boot1): Can't find valid F2FS filesystem in 1th k
[ 9.967216] mt7981_init()-->
[ 9.975343] F2FS-fs (mmcblk0boot1): Magic Mismatch, valid(0xf2f52010) - read)
[ 9.977836] Use the default iPAiLNA bin image!
[ 9.985318] F2FS-fs (mmcblk0boot1): Can't find valid F2FS filesystem in 2th k
[ 9.997729] <--mt7981_init()
[ 10.000670] RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(288) > !
[ 10.008236] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND1
[ 10.015582] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND2
[ 10.022912] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND3
[ 10.030247] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND4
[ 10.037578] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND5
[ 10.044909] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND6
[ 10.052243] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND7
[ 10.059573] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND8
[ 10.066902] WiFi@C12L1,match_index_by_chipname() 502: not find chip name IND9
[ 10.074217] WiFi@C12L2,match_index_by_chipname() 507: Not find slot id, back.
[ 10.082516] msta_ifname not found
[ 10.094818] -->mtfwd_init(ver:2.0)
[ 10.094867] <--
[ 10.098849] mtk_warp_proxy: module uses symbols from proprietary module mt_w.
[ 10.139946] usbcore: registered new interface driver qmi_wwan
[ 10.147325] usbcore: registered new interface driver rndis_host
[ 10.157466] usbcore: registered new interface driver usbserial_generic
[ 10.164131] usbserial: USB Serial support registered for generic
[ 10.190125] xt_time: kernel timezone is -0000
[ 10.195757] usbcore: registered new interface driver ftdi_sio
[ 10.201653] usbserial: USB Serial support registered for FTDI USB Serial Deve
[ 10.212014] PPP generic driver version 2.4.2
[ 10.213531] F2FS-fs (mmcblk0p4): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 10.224141] F2FS-fs (mmcblk0p4): Can't find valid F2FS filesystem in 1th supk
[ 10.224290] PPP MPPE Compression module registered
[ 10.232505] F2FS-fs (mmcblk0p4): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 10.244418] F2FS-fs (mmcblk0p4): Can't find valid F2FS filesystem in 2th supk
[ 10.245009] NET: Registered protocol family 24
[ 10.257563] PPTP driver version 0.8.5
[ 10.265575] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 10.271723] usbcore: registered new interface driver option
[ 10.277406] usbserial: USB Serial support registered for GSM modem (1-port)
[ 10.286278] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 10.430658] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 10.437931] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 1th supk
[ 10.445861] F2FS-fs (mmcblk0p2): Magic Mismatch, valid(0xf2f52010) - read(0x)
[ 10.453085] F2FS-fs (mmcblk0p2): Can't find valid F2FS filesystem in 2th supk
[ 11.559694] mtk_soc_eth 15100000.ethernet eth0: TX vlan offload cannot be en.
[ 11.569959] mtk_soc_eth 15100000.ethernet eth0: TX vlan offload cannot be en.
[ 13.945412] 7981@C12L1,rt28xx_ap_ioctl() 866: interface is down, cmd [8be2] !
[ 13.980520] 7981@C01L2,RTMP_COM_IoctlHandle() 1511: -> CMD_RTPRIV_IOCTL_VIRTT
[ 13.988799] msta_ifname not found
[ 13.992648] client_get_axi_slot_id(): wrong BUS_TYPE
[ 13.997615] warp_cap_support(): chip_id=7981 is in WHNAT support list
[ 14.004052] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entr3
[ 14.012743] client_hif_specific_get(): hw->base_phy_addr 0x18000000!!
[ 14.019177] client_chip_specific_get(): 0x7981 chip id 0x7981!!
[ 14.025190] warp_entry_get_by_pdev(): return entry[0]
[ 14.030399] warp_msg_register():warp,pid,3143,id,0,wed_idx,0
[ 14.036169] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_add0
[ 14.045342] wed_ring_init(): wed tx ring init result = 0
[ 14.050842] wed_ring_init(): wed rx ring init result = 0
[ 14.063020] create wed ok!!!
[ 14.065918] wdma_init(): wdma(0) base_addr=0xffffffc011205800, base_phy_addr0
[ 14.074701] warp_woif_bus_init_hw(): bus:000000008574d6b7, txring: 20, pa: 0c
[ 14.086020] warp_woif_bus_init_hw(): bus:000000008574d6b7, rxring: 50, pa: 0c
[ 14.097354] get_region_info(): wed_idx = 0, base_addr = 0x00000000d274a491, 0
[ 14.108573] get_region_info(): wed_idx = 0, base_addr = 0x000000002aea155e, 0
[ 14.119734] get_region_info(): wed_idx = 0, base_addr = 0x00000000cb136ff6, 1
[ 14.131044] get_region_info(): wed_idx = 0, base_addr = 0x00000000efc85465, 0
[ 14.142162] warp_fwdl_mcu_mode(): mcu mode, need fwdl
[ 14.182354] ########## WO Firmware ##########
[ 14.186725] Chip ID: 0x0000
[ 14.189505] ECO version:0
[ 14.192129] Version: DEV_000000
[ 14.195266] Build date: 20220420202134
[ 14.199008] Total region:3
[ 14.201702] #################################
[ 14.206051] Parsing tailer region 0
[ 14.209533] Target address: 0x151e0000
[ 14.213360] Download size: 20736
[ 14.216696] Parsing tailer region 1
[ 14.220178] Target address: 0x47d80000
[ 14.224006] Download size: 86000
[ 14.227384] Parsing tailer region 2
[ 14.230866] Target address: 0x47dc0000
[ 14.234694] Download size: 2283984
[ 14.240226] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu
[ 14.261229] warp_fwdl_ready_check_mcu_mode(): wocpu is ready
[ 14.266899] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE
[ 14.272822] wo_proc_init done 00000000874bb35e
[ 14.277348] wo_exep_proc_init done 00000000874bb35e
[ 14.282332] wo_exception_init(0): exp log= 0x000000004d9964dc, phy_addr= 0x08
[ 14.362242] 7981@C12L1,RTMPWirelessModeCfg() 604: Init: BSS0 PhyMode=78
[ 14.368858] 7981@C12L1,RTMPWirelessModeCfg() 604: Init: BSS1 PhyMode=177
[ 14.375846] 7981@C23L3,auto_ch_select_set_cfg() 3392: BandIdx0, AutoChannelA0
[ 14.385404] 7981@C23L3,auto_ch_select_set_cfg() 3392: BandIdx1, AutoChannelA0
[ 14.434221] 7981@C15L1,Set_PMFMFPC_Proc() 1722: [PMF] :: apidx=0, Desired MF1
[ 14.441607] WiFi@C15L1,Set_PMFMFPC_Proc() 1722: [PMF] :: apidx=1, Desired MF1
[ 14.450826] WiFi@C12L1,RTMPSetProfileParameters() 8443: ra0, QoSMgmtCapa=0
[ 14.457692] WiFi@C12L1,RTMPSetProfileParameters() 8443: (null), QoSMgmtCapa=0
[ 14.468978] WiFi@C12L1,rtmp_read_ap_client_from_file() 1588: APCLI[0] ApCliM0
[ 14.477491] WiFi@C12L1,rtmp_read_ap_client_from_file() 1588: APCLI[1] ApCliM0
[ 14.486163] WiFi@C12L1,rtmp_read_ap_client_from_file() 1607: APCLI[0] ApCliM0
[ 14.494679] WiFi@C12L1,rtmp_read_ap_client_from_file() 1607: APCLI[1] ApCliM0
[ 14.504938] WiFi@C03L1,AndesSendCmdMsg() 754: Could not send in band commandD
[ 14.516144] WiFi@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension c8
[ 14.524581] WiFi@C03L1,AndesSendCmdMsg() 754: Could not send in band commandD
[ 14.535786] WiFi@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension c8
[ 14.607509] wdma_dma_ctrl(): WDMA_GLO_CFG=50404e70, txrx = 0
[ 14.616704] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e70, txrx = 0
[ 14.630758] warp_tx_ring_init_hw(): configure ring 0 setting
[ 14.636424] warp_tx_ring_init_hw(): wed:00000000c68237e5 wifi:000000008e0f4c0
[ 14.646681] warp_tx_ring_init_hw(): configure ring 1 setting
[ 14.652335] warp_tx_ring_init_hw(): wed:00000000c68237e5 wifi:000000008e0f4c0
[ 14.662704] set_rrocfg,0
[ 14.688110] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e74, txrx = 3
[ 14.693760] using E1 ROM patch
[ 14.696808] using E1 RAM
[ 14.699342] current sync CR = 0x1
[ 14.702653] Built date: 20220420201732a
[ 14.706577] Platform: ALPS
[ 14.709359] HW/SW version: 0x8a108a10
[ 14.713103] Patch version: 0xffffffff
[ 14.720836] current sync CR = 0x1
[ 14.724148] Chip ID: 0x14
[ 14.726856] Eco version: 0x00
[ 14.729901] Region number: 0x0b
[ 14.733125] Format version: 0x02
[ 14.736436] Format flag: 0x01
[ 14.739486] Ram version: ____000000
[ 14.743062] Built date: 20220420201748
[ 14.746899] Common crc: 0x29f8303a
[ 14.750376] Release info: header tag = 0, total length = 64
[ 14.756029] tag 1, padding length = 1, tag length = 59
[ 14.761245] payload: t-neptune-main-mt7915-1953-MT7981_MP2111_3_0-2022042020
[ 14.788568] Chip ID: 0x00
[ 14.791296] Eco version: 0x00
[ 14.794338] Region number: 0x03
[ 14.797568] Format version: 0x02
[ 14.800878] Format flag: 0x01
[ 14.803928] Ram version: DEV_000000
[ 14.807506] Built date: 20220420202058
[ 14.811342] Common crc: 0xf1c27858
[ 14.814825] Release info: header tag = 0, total length = 0
[ 14.897236] current sync CR = 0x7
[ 14.900591] efuse_probe: efuse = deaddead
[ 14.926673] WiFi@C02L1,is_cal_free_ic() 831: [a-die version:1]
[ 17.887798] WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this!
[ 17.895309] WiFi@C01L1,AntCfgInit() 3035: Not support for HIF_MT yet!
[ 17.919293] ch_switch_monitor_state_machine_init:: enter
[ 17.924611] ch_switch_monitor_cfg_reset:: enter
[ 17.929148] ch_switch_monitor_cfg_reset:: enter
[ 17.934024] WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
[ 17.939961] WiFi@C03L1,MtCmdSetMacTxRx() 10207: (ret = 0)
[ 17.945464] WiFi@C03L1,MtCmdSetMacTxRx() 10207: (ret = 0)
[ 17.951055] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
[ 17.977894] wdma_dma_ctrl(): WDMA_GLO_CFG=58404e75, txrx = 3
[ 17.983651] WiFi@C03L1,MtCmdSetMacTxRx() 10207: (ret = 0)
[ 17.989151] WiFi@C03L1,MtCmdSetMacTxRx() 10207: (ret = 0)
[ 17.994605] WiFi@C00L1,set_ack_timeout_mode_byband() 13329: CTS/ACK Timeout !
[ 18.004512] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13417: DAT config band(0!
[ 18.013204] WiFi@C00L1,set_ack_timeout_mode_byband() 13329: CTS/ACK Timeout !
[ 18.023110] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13428: DAT config band(0!
[ 18.031888] WiFi@C00L1,set_ack_timeout_mode_byband() 13329: CTS/ACK Timeout !
[ 18.041794] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13439: DAT config band(0!
[ 18.050658] WiFi@C00L1,set_ack_timeout_mode_byband() 13329: CTS/ACK Timeout !
[ 18.060563] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13417: DAT config band(1!
[ 18.069253] WiFi@C00L1,set_ack_timeout_mode_byband() 13329: CTS/ACK Timeout !
[ 18.079160] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13428: DAT config band(1!
[ 18.087937] WiFi@C00L1,set_ack_timeout_mode_byband() 13329: CTS/ACK Timeout !
[ 18.097842] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13439: DAT config band(1!
[ 18.107725] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_w]
[ 18.116373] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_w]
[ 18.246832] :(op = 1)
[ 18.253993] 7981@C00L1,FastPathCheckMIC() 1010: (ret = 0)(op:1)
[ 18.259956] 7981@C00L2,red_tail_drop_init() 83: red_tail_drop_init: availabl1
[ 18.269208] 7981@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0)
[ 18.275758] 7981@C00L1,SendRedCmd() 1049: SendRedCmd:(ret = 1)
[ 18.281826] 7981@C01L2,RTMP_COM_IoctlHandle() 1488: -> CMD_RTPRIV_IOCTL_VIRP
[ 18.289863] WiFi@C01L3,wifi_sys_open() 840: wdev idx = 0
[ 18.295508] 7981@C18L3,BuildChannelList() 475:
[ 18.300085] 7981@C00L3,BuildChannelList() 505: BandIdx = 0, PhyMode = 78, Ch:
[ 18.308295] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.314659] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.321124] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.327502] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.333964] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.340332] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.346788] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.353165] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.359626] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.365999] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.372460] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.378827] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.385297] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.391666] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.398123] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.404498] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.410952] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.417325] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.423792] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.430168] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.436628] 7981@C14L1,vht80_channel_group() 1560: invalid ch_band 0
[ 18.442991] 7981@C14L1,vht160_channel_group() 1629: invalid ch_band 0
[ 18.449445] 7981@C23L1,DfsBuildChannelList() 3465: [RDM]: wdev is not 5G.
[ 18.456279] 7981@C23L3,RadarStateCheck() 239: Zero Wait State: 0
[ 18.462424] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bil
[ 18.471642] 7981@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=6, ctrl_ch2=0, ce)
[ 18.618120] 7981@C03L3,MtCmdSetTxRxPath() 2772: ctrl_chl=6, ctrl_ch2=0, cent)
[ 18.632076] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xa4/0x14]
[ 18.640134] wdev_attr_update(): wdevId0 = f8:5e:3c:66:af:c6
[ 18.645777] WiFi@C12L1,wifi_sys_open() 891: wifi_sys_open():band0 group_idx[0
[ 18.654930] 7981@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=0
[ 18.660902] 7981@C02L2,AsicRadioOnOffCtrl() 2291: DbdcIdx=0 RadioOn
[ 18.667924] 7981@C00L2,ApAutoChannelAtBootUp() 332: ----------------->
[ 18.674856] 7981@C03L1,MtCmdSetMacTxRx() 10207: (ret = 0)
[ 18.680440] 7981@C03L1,MtCmdSetMacTxRx() 10207: (ret = 0)
[ 18.685895] 7981@C00L1,ApAutoChannelAtBootUp() 498: not A band
[ 18.691792] 7981@C08L1,ap_run_at_boot() 624: ACS is disable !!
[ 18.698671] 7981@C08L2,APStartUpForMbss() 976: ===>(caller:ap_inf_open+0x1440
[ 18.709252] 7981@C15L2,APPMFInit() 133: [PMF] apidx=0, MFPC=1, MFPR=0, SHA250
[ 18.716618] 7981@C18L3,BuildChannelList() 475:
[ 18.721390] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_w]
[ 18.728999] WiFi@C08L2,ap_link_up() 7047: (caller:wdev_do_linkup+0x20/0x38 [)
[ 18.737621] 7981@C01L3,wifi_sys_linkup() 1150: wdev idx = 0
[ 18.813063] 7981@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0
[ 18.822855] 7981@C08L3,UpdateBeaconHandler() 1903: BCN_UPDATE_INIT, OmacIdx )
[ 18.830691] 7981@C08L3,UpdateBeaconHandler() 1916: Band0 BcnInitedRnd = 5
[ 18.837664] 7981@C00L1,TxCCKStreamCtrl() 20323: set wrong parameters
[ 18.854372] PrintSrCmd:
[ 18.854372] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 18.854372] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 18.868387] PrintSrCmd:
[ 18.868387] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 18.868387] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 18.882375] PrintSrCmd:
[ 18.882375] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 18.882375] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
399-799
[ 18.882375] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 18.896370] PrintSrCmd:
[ 18.896370] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 18.896370] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 18.910453] PrintSrCmd:
[ 18.910453] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 18.910453] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 18.924533] PrintSrCmd:
[ 18.924533] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 18.924533] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 18.938685] 7981@C03L3,MtCmdTxPwrShowInfo() 13707: ucTxPowerInfoCatg: 2, Ban
[ 18.946486] 7981@C03L3,MtCmdTxPwrShowInfo() 13736: (ret = 0)
[ 18.952152] [mtf_txpower_all_rate_info] band_idx:0 pwr:43 ChBand:2G ePAGain:0
[ 18.959306] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 19.048737] 7981@C08L2,mbss_virtual_if_open() 134: ===> rax0
[ 19.054558] 7981@C01L2,RTMP_COM_IoctlHandle() 1511: -> CMD_RTPRIV_IOCTL_VIRTT
[ 19.062654] 7981@C01L2,RTMP_COM_IoctlHandle() 1488: -> CMD_RTPRIV_IOCTL_VIRP
[ 19.070656] WiFi@C01L3,wifi_sys_open() 840: wdev idx = 1
[ 19.076230] 7981@C18L3,BuildChannelList() 475:
[ 19.080795] 7981@C00L3,BuildChannelList() 505: BandIdx = 1, PhyMode = 177, C:
[ 19.089226] 7981@C23L3,DfsBuildChannelList() 3510: Done
[ 19.094468] 7981@C23L3,RadarStateCheck() 239: Zero Wait State: 0
[ 19.100471] 7981@C23L3,RadarStateCheck() 263: RD_SILENCE_MODE
[ 19.107351] 7981@C23L3,DfsCacNormalStart() 3377: [RDM] CAC 65 seconds start X
[ 19.115792] 7981@C23L3,DfsSwitchCheck() 3666: DFS ByPass TX calibration.
[ 19.122550] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bil
[ 19.131690] 7981@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=36, ctrl_ch2=0, c)
[ 19.192848] 7981@C03L3,MtCmdSetTxRxPath() 2772: ctrl_chl=36, ctrl_ch2=0, cen)
[ 19.211828] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xa4/0x14]
[ 19.219863] wdev_attr_update(): wdevId1 = fa:5e:3c:76:af:c6
[ 19.225463] WiFi@C12L1,wifi_sys_open() 891: wifi_sys_open():band1 group_idx[0
[ 19.234434] 7981@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=1
[ 19.241298] 7981@C02L2,AsicRadioOnOffCtrl() 2291: DbdcIdx=1 RadioOn
[ 19.248138] 7981@C00L2,ApAutoChannelAtBootUp() 332: ----------------->
[ 19.254777] 7981@C03L1,MtCmdSetMacTxRx() 10207: (ret = 0)
[ 19.260278] 7981@C03L1,MtCmdSetMacTxRx() 10207: (ret = 0)
[ 19.265676] 7981@C00L1,ApAutoChannelAtBootUp() 492: zero-wait DFS is not enad
[ 19.273067] 7981@C08L1,ap_run_at_boot() 624: ACS is disable !!
[ 19.279883] 7981@C08L2,APStartUpForMbss() 976: ===>(caller:ap_inf_open+0x1440
[ 19.290454] 7981@C15L2,APPMFInit() 121: [PMF] Security is not WPA2/WPA2PSK AS
[ 19.297681] 7981@C15L2,APPMFInit() 133: [PMF] apidx=1, MFPC=0, MFPR=0, SHA250
[ 19.304990] 7981@C18L3,BuildChannelList() 475:
[ 19.309735] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_w]
[ 19.317343] WiFi@C08L2,ap_link_up() 7047: (caller:wdev_do_linkup+0x20/0x38 [)
[ 19.325970] 7981@C01L3,wifi_sys_linkup() 1150: wdev idx = 1
[ 19.331784] 7981@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=1
[ 19.341387] 7981@C08L3,UpdateBeaconHandler() 1903: BCN_UPDATE_INIT, OmacIdx )
[ 19.349304] 7981@C08L3,UpdateBeaconHandler() 1916: Band1 BcnInitedRnd = 10
[ 19.369385] PrintSrCmd:
[ 19.369385] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 19.369385] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 19.383385] PrintSrCmd:
[ 19.383385] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 19.383385] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 19.397383] PrintSrCmd:
[ 19.397383] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 19.397383] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 19.411374] PrintSrCmd:
[ 19.411374] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 19.411374] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 19.425447] PrintSrCmd:
[ 19.425447] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 19.425447] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 19.439521] PrintSrCmd:
[ 19.439521] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 19.439521] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 19.453637] 7981@C03L3,MtCmdTxPwrShowInfo() 13707: ucTxPowerInfoCatg: 2, Ban
[ 19.461389] 7981@C03L3,MtCmdTxPwrShowInfo() 13736: (ret = 0)
[ 19.461492] [mtf_txpower_all_rate_info] band_idx:1 pwr:42 ChBand:5G ePAGain:0
[ 19.467060] mtk_ppe_dev_register_hook : ineterface rax0 register (2)
[ 20.210186] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 20.292793] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500bae
[ 20.303309] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - x
[ 20.311997] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.324728] device eth0 entered promiscuous mode
[ 20.329898] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 20.337323] 8021q: adding VLAN 0 to HW filter on device lan1
[ 20.347638] br-lan: port 1(lan1) entered blocking state
[ 20.352938] br-lan: port 1(lan1) entered disabled state
[ 20.358900] device lan1 entered promiscuous mode
[ 20.373824] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 20.387342] 8021q: adding VLAN 0 to HW filter on device lan2
[ 20.398368] br-lan: port 2(lan2) entered blocking state
[ 20.403651] br-lan: port 2(lan2) entered disabled state
[ 20.410668] device lan2 entered promiscuous mode
[ 20.419575] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 20.426820] 8021q: adding VLAN 0 to HW filter on device lan3
[ 20.442820] br-lan: port 3(lan3) entered blocking state
[ 20.448095] br-lan: port 3(lan3) entered disabled state
[ 20.463140] device lan3 entered promiscuous mode
[ 20.475320] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 20.483882] 8021q: adding VLAN 0 to HW filter on device lan4
[ 20.497525] br-lan: port 4(lan4) entered blocking state
[ 20.502794] br-lan: port 4(lan4) entered disabled state
[ 20.509506] device lan4 entered promiscuous mode
[ 20.536002] MediaTek MT7981 PHY mdio-bus:00: TX-VCM SW cal result: 0x2
[ 20.544003] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:00] driver [Me]
[ 20.552674] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/gmii line
[ 20.906613] BcnCheck start after 3000 ms (ra0)
[ 22.157849] 7981@C12L1,rt28xx_ap_ioctl() 833: interface is down, cmd [8be1] !
[ 22.166016] nf_unregister_hooks()
[ 22.167482] 7981@C12L1,rt28xx_ap_ioctl() 833: interface is down, cmd [8be1] !
[ 22.322480] Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x0
[ 22.333540] Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x20
[ 22.345793] 7981@C12L1,RTMPAPPrivIoctlSet() 3539: IOCTL::(iwpriv) Command no]
[ 22.360624] Set_Fh_Bss_Proc rax0 wdev->MAPCfg.DevOwnRole 0x0
[ 22.372186] Set_Fh_Bss_Proc rax0 wdev->MAPCfg.DevOwnRole 0x20
[ 22.385562] 7981@C12L1,RTMPAPPrivIoctlSet() 3539: IOCTL::(iwpriv) Command no]
[ 23.066633] sh (5827): drop_caches: 3
[ 23.518609] BcnCheck start after 500 ms (ra0)
[ 23.930084] 7981@C12L1,rt28xx_ap_ioctl() 833: interface is down, cmd [8be1] !
[ 23.937997] 7981@C12L1,rt28xx_ap_ioctl() 833: interface is down, cmd [8be1] !
[ 24.907691] module exit
[ 25.137709] 7981@C12L1,rt28xx_ap_ioctl() 833: interface is down, cmd [8be1] !
[ 25.177480] 7981@C12L1,rt28xx_ap_ioctl() 833: interface is down, cmd [8be1] !
[ 25.336290] Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x0
[ 25.353032] Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x20
[ 25.374161] 7981@C12L1,RTMPAPPrivIoctlSet() 3539: IOCTL::(iwpriv) Command no]
[ 25.399467] Set_Fh_Bss_Proc rax0 wdev->MAPCfg.DevOwnRole 0x0
[ 25.417025] Set_Fh_Bss_Proc rax0 wdev->MAPCfg.DevOwnRole 0x20
[ 25.435612] 7981@C12L1,RTMPAPPrivIoctlSet() 3539: IOCTL::(iwpriv) Command no]
[ 25.490624] br-lan: port 5(ra0) entered blocking state
[ 25.495775] br-lan: port 5(ra0) entered disabled state
[ 25.501122] device ra0 entered promiscuous mode
[ 25.505765] br-lan: port 5(ra0) entered blocking state
[ 25.510913] br-lan: port 5(ra0) entered forwarding state
[ 25.516320] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 25.527437] br-lan: port 6(apcli0) entered blocking state
[ 25.532858] br-lan: port 6(apcli0) entered disabled state
[ 25.538501] device apcli0 entered promiscuous mode
[ 25.607525] br-lan: port 7(rax0) entered blocking state
[ 25.612822] br-lan: port 7(rax0) entered disabled state
[ 25.618308] device rax0 entered promiscuous mode
[ 25.623097] br-lan: port 7(rax0) entered blocking state
[ 25.628371] br-lan: port 7(rax0) entered forwarding state
[ 25.648806] br-lan: port 8(apclix0) entered blocking state
[ 25.654357] br-lan: port 8(apclix0) entered disabled state
[ 25.660108] device apclix0 entered promiscuous mode
[ 25.665396] no net device found for lan0 or apclix0
[ 25.905725] br-lan: port 1(lan1) entered disabled state
[ 25.918527] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 25.925871] 8021q: adding VLAN 0 to HW filter on device lan1
[ 25.944963] br-lan: port 2(lan2) entered disabled state
[ 25.957669] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 25.965007] 8021q: adding VLAN 0 to HW filter on device lan2
[ 25.983965] br-lan: port 3(lan3) entered disabled state
[ 25.996849] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 26.004192] 8021q: adding VLAN 0 to HW filter on device lan3
[ 26.023357] br-lan: port 4(lan4) entered disabled state
[ 26.036234] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 26.043579] 8021q: adding VLAN 0 to HW filter on device lan4
[ 26.086447] Set_MapR2_Proc MAP R2 is already disabled
[ 26.092843] Set_MapTS_Proc MAP TS is already disabled
[ 26.102325] Set_MapR2_Proc MAP R2 is already disabled
[ 26.108758] Set_MapTS_Proc MAP TS is already disabled
[ 26.121019] Set_Enable_Dpp_Proc DPP is already disabled
[ 26.127589] Set_MapTS_Proc MAP TS is already disabled
[ 26.138464] Set_Enable_Dpp_Proc DPP is already disabled
[ 26.145125] Set_MapTS_Proc MAP TS is already disabled
[ 26.177032] Set_Map_Proc current MAP MODE is 0
[ 26.185898] Set_Map_Proc current MAP MODE is 0
[ 26.202870] br-lan: port 1(lan1) entered disabled state
[ 26.214186] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 26.221585] 8021q: adding VLAN 0 to HW filter on device lan1
[ 26.235284] br-lan: port 2(lan2) entered disabled state
[ 26.246358] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 26.253735] 8021q: adding VLAN 0 to HW filter on device lan2
[ 26.267483] br-lan: port 3(lan3) entered disabled state
[ 26.278470] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 26.285879] 8021q: adding VLAN 0 to HW filter on device lan3
[ 26.299577] br-lan: port 4(lan4) entered disabled state
[ 26.311930] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 26.319282] 8021q: adding VLAN 0 to HW filter on device lan4
[ 28.375099] 7981@C12L1,rt28xx_ap_ioctl() 833: interface is down, cmd [8be1] !
[ 28.383419] 7981@C12L1,rt28xx_ap_ioctl() 833: interface is down, cmd [8be1] !
[ 28.410091] Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x0
[ 28.418156] Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x20
[ 28.429787] 7981@C12L1,RTMPAPPrivIoctlSet() 3539: IOCTL::(iwpriv) Command no]
[ 28.510084] Set_Fh_Bss_Proc rax0 wdev->MAPCfg.DevOwnRole 0x0
[ 28.517743] Set_Fh_Bss_Proc rax0 wdev->MAPCfg.DevOwnRole 0x20
[ 28.526325] 7981@C12L1,RTMPAPPrivIoctlSet() 3539: IOCTL::(iwpriv) Command no]
END OF LOG
hi @frollic, any chance to get any help, since I've been able to post the boot log?
thanks
you own it, it'd be mostly up to you to make support happen.
you could however DL the KERNEL image for the vanilla Z8102AX from https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=mediatek%2Ffilogic&id=zbtlink_zbt-z8102ax, and boot it using the tftpboot + bootm commands in u-boot.
then post the boot log.
thanks for the tip. I'll try to do it.
@frollic
According to yuor tip, I did some progress: I TFTPed the kernel image and below is the bootlog. The router become accessible only via ssh, but no way to access it via browser.
Regarding factory image and sysupgrade image I got "Wrong Image Format for bootm command. ERROR: can't get kernel image!"
Waiting for your feedback. thanks a lot for your support.
BOOT LOG from .BIN KERNEL
-------------------------------
MT7981> tftpboot /srv/tftp/02_kernel.bin
Using ethernet@15100000 device
TFTP from server 192.168.1.31; our IP address is 192.168.1.1
Filename '/srv/tftp/02_kernel.bin'.
Load address: 0x46000000
Loading: ###################################################### ###################################################### ###################################################### ###################################################### ###################################################### ###################################################### ######################################################################################################################################################## 9.2 MiB/s
done
Bytes transferred = 8742672 (856710 hex)
-------------------------------
MT7981> bootm
## Loading kernel from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-6.6.63
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x460000e8
Data Size: 4394713 Bytes = 4.2 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x48000000
Entry Point: 0x48000000
Hash algo: crc32
Hash value: baf1b8a1
Hash algo: sha1
Hash value: 635b63ea2c3cad3870bcdc68a2605e46bdec78f6
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading ramdisk from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'initrd-1' ramdisk subimage
Description: ARM64 OpenWrt zbtlink_zbt-z8102ax initrd
Type: RAMDisk Image
Compression: uncompressed
Data Start: 0x46431104
Data Size: 4322312 Bytes = 4.1 MiB
Architecture: AArch64
OS: Linux
Load Address: unavailable
Entry Point: unavailable
Hash algo: crc32
Hash value: 7d9bd10c
Hash algo: sha1
Hash value: 46032456c3da5e53b115e78927fda07204b216be
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt zbtlink_zbt-z8102ax device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4685061c
Data Size: 23482 Bytes = 22.9 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: bfbfd364
Hash algo: sha1
Hash value: 3809f725beb3eab7bbf63a37a6707a9788302d74
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4685061c
Working FDT set to 4685061c
Uncompressing Kernel Image
Loading Ramdisk to 7f3da000, end 7f7f9408 ... OK
Loading Device Tree to 000000007f3d1000, end 000000007f3d9bb9 ... OK
Working FDT set to 7f3d1000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.63 (builder@buildhost) (aarch64-openwrt-linux-4
[ 0.000000] Machine model: Zbtlink ZBT-Z8102AX
[ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB0
[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 Ki0
[ 0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 K0
[ 0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 Ki0
[ 0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 K0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
[ 0.000000] node 0: [mem 0x0000000043030000-0x0000000047c7ffff]
[ 0.000000] node 0: [mem 0x0000000047c80000-0x0000000047ffffff]
[ 0.000000] node 0: [mem 0x0000000048000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728
[ 0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel conn
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0x11002000 console8
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, l)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[ 0.000000] software IO TLB: area num 2.
[ 0.000000] software IO TLB: mapped [mem 0x000000007fb26000-0x000000007fc260)
[ 0.000000] Memory: 1005632K/1048576K available (9024K kernel code, 998K rwd)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398s
[ 0.008146] Calibrating delay loop (skipped), value calculated using timer f)
[ 0.018557] pid_max: default: 32768 minimum: 301
[ 0.026076] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, lin)
[ 0.033522] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.043591] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.050243] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adj.
[ 0.059686] rcu: Hierarchical SRCU implementation.
[ 0.064497] rcu: Max phase no-delay instances is 1000.
[ 0.070164] smp: Bringing up secondary CPUs ...
[ 0.075072] Detected VIPT I-cache on CPU1
[ 0.075116] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.075147] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.075218] smp: Brought up 1 node, 2 CPUs
[ 0.096834] SMP: Total of 2 processors activated.
[ 0.101556] CPU features: detected: 32-bit EL0 Support
[ 0.106714] CPU features: detected: CRC32 instructions
[ 0.111915] CPU features: emulated: Privileged Access Never (PAN) using TTBRg
[ 0.120305] CPU: All CPU(s) started at EL2
[ 0.124425] alternatives: applying system-wide alternatives
[ 0.133983] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[ 0.143896] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.151974] pinctrl core: initialized pinctrl subsystem
[ 0.158298] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.164875] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.172010] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic alls
[ 0.179807] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic as
[ 0.188147] thermal_sys: Registered thermal governor 'fair_share'
[ 0.188153] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.194272] thermal_sys: Registered thermal governor 'step_wise'
[ 0.200316] thermal_sys: Registered thermal governor 'user_space'
[ 0.206421] ASID allocator initialised with 65536 entries
[ 0.218900] pstore: Using crash dump compression: deflate
[ 0.224338] pstore: Registered ramoops as persistent store backend
[ 0.230545] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.243268] Modules: 29376 pages in range for non-PLT usage
[ 0.243279] Modules: 520896 pages in range for PLT usage
[ 0.250198] cryptd: max_cpu_qlen set to 1000
[ 0.261003] SCSI subsystem initialized
[ 0.264950] libata version 3.00 loaded.
[ 0.270571] clocksource: Switched to clocksource arch_sys_counter
[ 0.279015] NET: Registered PF_INET protocol family
[ 0.284058] IP idents hash table entries: 16384 (order: 5, 131072 bytes, lin)
[ 0.293195] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192)
[ 0.301612] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,)
[ 0.309398] TCP established hash table entries: 8192 (order: 4, 65536 bytes,)
[ 0.317239] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linea)
[ 0.324681] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.331463] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, lin)
[ 0.339016] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.345693] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.353083] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.358818] PCI: CLS 0 bytes, default 64
[ 0.362966] Unpacking initramfs...
[ 0.372897] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.384236] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.390111] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI.
[ 0.433162] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 0.442248] gpio-export gpio-export: 5 gpio(s) exported
[ 0.457162] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.467331] printk: console [ttyS0] disabled
[ 0.492037] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud =2
[ 0.501272] printk: console [ttyS0] enabled
[ 0.501272] printk: console [ttyS0] enabled
[ 0.509646] printk: bootconsole [uart8250] disabled
[ 0.509646] printk: bootconsole [uart8250] disabled
[ 0.525446] loop: module loaded
[ 0.531308] spi-nand spi0.0: unknown raw ID 0000000000
[ 0.536452] spi-nand: probe of spi0.0 failed with error -524
[ 0.672680] i2c_dev: i2c /dev entries driver
[ 0.678632] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, now)
[ 0.687866] NET: Registered PF_INET6 protocol family
[ 0.694465] Segment Routing with IPv6
[ 0.698173] In-situ OAM (IOAM) with IPv6
[ 0.702229] NET: Registered PF_PACKET protocol family
[ 0.707325] bridge: filtering via arp/ip/ip6tables is no longer available by.
[ 0.720650] 8021q: 802.1Q VLAN Support v1.8
[ 0.749038] phy phy-soc:usb-phy@11e10000.1: type_sw - reg 0x218, index 0
[ 1.012692] clk: Disabling unused clocks
[ 1.636669] Freeing initrd memory: 4220K
[ 1.655790] Freeing unused kernel memory: 448K
[ 1.660305] Run /init as init process
[ 1.664011] with arguments:
[ 1.666970] /init
[ 1.669232] with environment:
[ 1.672365] HOME=/
[ 1.674714] TERM=linux
[ 1.836176] init: Console is alive
[ 1.839721] init: - watchdog -
[ 1.848258] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.863483] usbcore: registered new interface driver usbfs
[ 1.869022] usbcore: registered new interface driver hub
[ 1.874458] usbcore: registered new device driver usb
[ 1.880031] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 1.892083] xhci-mtk 11200000.usb: supply vbus not found, using dummy regular
[ 1.900242] xhci-mtk 11200000.usb: xHCI Host Controller
[ 1.905536] xhci-mtk 11200000.usb: new USB bus registered, assigned bus numb1
[ 1.915945] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 q0
[ 1.925159] xhci-mtk 11200000.usb: irq 79, io mem 0x11200000
[ 1.930965] xhci-mtk 11200000.usb: xHCI Host Controller
[ 1.936187] xhci-mtk 11200000.usb: new USB bus registered, assigned bus numb2
[ 1.943605] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[ 1.951144] hub 1-0:1.0: USB hub found
[ 1.954942] hub 1-0:1.0: 1 port detected
[ 1.959231] usb usb2: We don't know the algorithms for LPM for this host, di.
[ 1.967824] hub 2-0:1.0: USB hub found
[ 1.971646] hub 2-0:1.0: 1 port detected
[ 1.979927] kmodloader: done loading kernel modules from /etc/modules-boot.d*
[ 1.997882] init: - preinit -
ip: SIOCGIFFLAGS: No such device
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 2.440571] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[ 2.623900] hub 1-1:1.0: USB hub found
[ 2.627936] hub 1-1:1.0: 4 ports detected
[ 2.770733] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[ 2.809365] hub 2-1:1.0: USB hub found
[ 2.813945] hub 2-1:1.0: 4 ports detected
[ 6.363890] random: procd: uninitialized urandom read (4 bytes read)
[ 6.366547] procd: - early -
[ 6.373321] procd: - watchdog -
[ 6.902462] procd: - watchdog -
[ 6.905769] procd: - ubus -
[ 12.220707] platform 15100000.ethernet: deferred probe pending
[ 14.270572] random: crng init done
[ 14.276641] procd: - init -
Please press Enter to activate this console.
[ 14.467198] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.483784] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,0
[ 14.499027] usbcore: registered new interface driver cdc_wdm
[ 14.505331] Loading modules backported from Linux version v6.11.2-0-g7aa21feb
[ 14.512841] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942
[ 14.527523] usbcore: registered new interface driver usbserial_generic
[ 14.534198] usbserial: USB Serial support registered for generic
[ 14.679609] urngd: v1.0.2 started.
[ 14.880748] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Timea
[ 14.880748]
[ 14.902838] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Buil4
[ 14.944808] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Buil1
[ 15.042804] mt798x-wmac 18000000.wifi: eeprom load fail, use default bin
[ 15.049566] mt798x-wmac 18000000.wifi: Direct firmware load for mediatek/mt72
[ 15.060698] mt798x-wmac 18000000.wifi: Falling back to sysfs fallback for: mn
[ 15.096815] mt798x-wmac: probe of 18000000.wifi failed with error -12
[ 15.127189] PPP generic driver version 2.4.2
[ 15.132745] NET: Registered PF_PPPOX protocol family
[ 15.138911] usbcore: registered new interface driver qmi_wwan
[ 15.147728] usbcore: registered new interface driver option
[ 15.153429] usbserial: USB Serial support registered for GSM modem (1-port)
[ 15.162279] kmodloader: done loading kernel modules from /etc/modules.d/*
HIT A KEY
BusyBox v1.37.0 (2024-12-09 19:10:43 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r28277-59dd9cddf9
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
OpenWrt recently switched to the "apk" package manager!
OPKG Command APK Equivalent Description
------------------------------------------------------------------
opkg install <pkg> apk add <pkg> Install a package
opkg remove <pkg> apk del <pkg> Remove a package
opkg upgrade apk upgrade Upgrade all packages
opkg files <pkg> apk info -L <pkg> List package contents
opkg list-installed apk info List installed packages
opkg update apk update Update package lists
opkg search <pkg> apk search <pkg> Search for packages
------------------------------------------------------------------
For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cht
root@OpenWrt:~#