Hello forum, my first post so please be nice 
I just got myself one of them we-826 T and as I understood, it is 16M version. So I searched and found: https://openwrt.org/toh/hwdata/zbt/zbt_we826t_16m and it seams to be the exact box I have. From there I found: https://openwrt.org/toh/zbtlink/we-826 and ofc there is a build that matches my box, downloaded and installed it, boots out of the box without any major quirks.
I have 3 question about this:
- Leds cant be controlled, found this post that have a fix, not really sure how to apply it: ZBT WE826-T2 Missing led configuration - #10 by TonyB_IT and yes, leds are crazy strong so lights up an entire room with epilepsylights...
- Interface is kinda slow and laggy, was woundering if there are benifits or the option to not run the web interface at all? any performance gains with running ssh only ?
- I'm pretty much gonna have same usecase for this box all the time, and was thinking I could have a build that does pretty much only that: SIM-card and occasionally use WAN-port, ethports should act as a hub and be routed through SIM/WAN interface, also I would like wireguard to run as client, but not push all the data through, but be able to communicate with a specific machine.
So in my head, it will perform better without the web interface, and run only the things needed for my scenarios?
Listing some output:
dmesg:
[ 0.000000] Linux version 5.10.146 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19803-9a599fee93) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Fri Oct 14 22:44:41 2022
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is Zbtlink ZBT-WE826 (16M)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] Normal zone: 288 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Writing ErrCtl register=0003d780
[ 0.000000] Readback ErrCtl register=0003d780
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 121316K/131072K available (5642K kernel code, 625K rwdata, 688K rodata, 1228K init, 217K bss, 9756K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.007708] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.073635] pid_max: default: 32768 minimum: 301
[ 0.078331] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.085389] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.095541] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.107888] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.117456] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.124151] pinctrl core: initialized pinctrl subsystem
[ 0.132006] NET: Registered protocol family 16
[ 0.137110] thermal_sys: Registered thermal governor 'step_wise'
[ 0.627225] mt7620-pci 10140000.pcie: PCIE0 no card, disable it(RST&CLK)
[ 0.639559] mt7620-pci: probe of 10140000.pcie failed with error -1
[ 0.696978] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.702397] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.708811] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.714199] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.720607] rt2880_gpio 10000688.gpio: registering 1 gpios
[ 0.725910] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[ 0.742896] clocksource: Switched to clocksource systick
[ 0.749465] NET: Registered protocol family 2
[ 0.754086] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.762041] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.770253] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.777670] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.784508] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.790830] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.797193] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.804281] NET: Registered protocol family 1
[ 0.808480] PCI: CLS 0 bytes, default 32
[ 0.817801] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.826841] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 0.838864] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.844531] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.856381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.865971] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.875226] printk: console [ttyS0] disabled
[ 0.879422] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.889101] printk: console [ttyS0] enabled
[ 0.897548] printk: bootconsole [early0] disabled
[ 0.925408] spi spi0.0: force spi mode3
[ 0.930717] spi-nor spi0.0: w25q128 (16384 Kbytes)
[ 0.935756] 4 fixed-partitions partitions found on MTD device spi0.0
[ 0.942294] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
[ 0.949815] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
[ 0.957863] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
[ 0.965420] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
[ 0.973157] Creating 4 MTD partitions on "spi0.0":
[ 0.978080] 0x000000000000-0x000000030000 : "u-boot"
[ 0.986648] 0x000000030000-0x000000040000 : "u-boot-env"
[ 0.993460] 0x000000040000-0x000000050000 : "factory"
[ 1.001752] 0x000000050000-0x000001000000 : "firmware"
[ 1.008681] 2 uimage-fw partitions found on MTD device firmware
[ 1.014813] Creating 2 MTD partitions on "firmware":
[ 1.019887] 0x000000000000-0x000000215f79 : "kernel"
[ 1.024966] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
[ 1.036507] 0x000000215f79-0x000000fb0000 : "rootfs"
[ 1.041596] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[ 1.052216] mtd: device 5 (rootfs) set to be root filesystem
[ 1.059303] 1 squashfs-split partitions found on MTD device rootfs
[ 1.065708] 0x0000005c6000-0x000000fb0000 : "rootfs_data"
[ 1.085166] gsw: setting port4 to ephy mode
[ 1.104100] mtk_soc_eth 10100000.ethernet: mdio-bus disabled
[ 1.110153] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 1.117038] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 1.126238] rt2880_wdt 10000120.watchdog: Initialized
[ 1.133003] NET: Registered protocol family 10
[ 1.144096] Segment Routing with IPv6
[ 1.148006] NET: Registered protocol family 17
[ 1.152632] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.165937] 8021q: 802.1Q VLAN Support v1.8
[ 1.197267] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 1.211536] Freeing unused kernel memory: 1228K
[ 1.216204] This architecture does not have kernel memory protection.
[ 1.222784] Run /sbin/init as init process
[ 1.226970] with arguments:
[ 1.226977] /sbin/init
[ 1.226982] with environment:
[ 1.226988] HOME=/
[ 1.226994] TERM=linux
[ 3.030834] init: Console is alive
[ 3.035039] init: - watchdog -
[ 6.009399] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.378430] usbcore: registered new interface driver usbfs
[ 6.384201] usbcore: registered new interface driver hub
[ 6.389751] usbcore: registered new device driver usb
[ 6.404635] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.414074] ehci-fsl: Freescale EHCI Host controller driver
[ 6.422454] ehci-platform: EHCI generic platform driver
[ 6.438398] phy phy-usbphy.0: remote usb device wakeup disabled
[ 6.444466] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 6.449000] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 6.454905] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 6.463156] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 6.477917] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 6.485586] hub 1-0:1.0: USB hub found
[ 6.490468] hub 1-0:1.0: 1 port detected
[ 6.500977] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.511454] ohci-platform: OHCI generic platform driver
[ 6.517259] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[ 6.524321] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[ 6.532585] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[ 6.567851] hub 2-0:1.0: USB hub found
[ 6.572645] hub 2-0:1.0: 1 port detected
[ 6.611591] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.623728] init: - preinit -
[ 6.774496] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 7.783074] hub 1-1:1.0: USB hub found
[ 7.788018] hub 1-1:1.0: 4 ports detected
[ 8.233903] random: procd: uninitialized urandom read (4 bytes read)
[ 8.323747] usb 1-1.3: new high-speed USB device number 3 using ehci-platform
[ 9.480587] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.605661] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.901892] random: jshn: uninitialized urandom read (4 bytes read)
[ 11.239976] 8021q: adding VLAN 0 to HW filter on device eth0
[ 14.605373] jffs2: notice: (478) jffs2_build_xattr_subsystem: complete building xattr subsystem, 97 of xdatum (83 unchecked, 14 orphan) and 141 of xref (24 dead, 0 orphan) found.
[ 14.650177] mount_root: switching to jffs2 overlay
[ 14.668714] overlayfs: upper fs does not support tmpfile.
[ 14.707161] urandom-seed: Seeding with /etc/urandom.seed
[ 16.288788] procd: - early -
[ 16.292205] procd: - watchdog -
[ 17.520195] procd: - watchdog -
[ 17.536423] procd: - ubus -
[ 17.624280] random: ubusd: uninitialized urandom read (4 bytes read)
[ 17.903718] random: ubusd: uninitialized urandom read (4 bytes read)
[ 18.016518] random: ubusd: uninitialized urandom read (4 bytes read)
[ 18.048119] procd: - init -
[ 18.637976] random: jshn: uninitialized urandom read (4 bytes read)
[ 18.930232] random: ubusd: uninitialized urandom read (4 bytes read)
[ 18.937238] random: ubus: uninitialized urandom read (4 bytes read)
[ 24.937145] urngd: jent-rng init failed, err: 2
[ 27.697832] kmodloader: loading kernel modules from /etc/modules.d/*
[ 28.382480] usbcore: registered new interface driver cdc_wdm
[ 28.409589] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[ 28.417408] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[ 28.619732] usbcore: registered new interface driver usbserial_generic
[ 28.626582] usbserial: USB Serial support registered for generic
[ 28.644402] cdc_ether 1-1.3:1.4 usb0: register 'cdc_ether' at usb-101c0000.ehci-1.3, CDC Ethernet Device, da:fa:4a:0a:14:19
[ 28.656126] usbcore: registered new interface driver cdc_ether
[ 28.779872] usbcore: registered new interface driver cdc_ncm
[ 29.569226] PPP generic driver version 2.4.2
[ 29.605265] NET: Registered protocol family 24
[ 29.676240] usbcore: registered new interface driver qmi_wwan
[ 30.522767] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 30.530843] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 30.578778] usbcore: registered new interface driver cdc_mbim
[ 30.662378] usbcore: registered new interface driver option
[ 30.668249] usbserial: USB Serial support registered for GSM modem (1-port)
[ 30.676125] option 1-1.3:1.0: GSM modem (1-port) converter detected
[ 30.682839] usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB0
[ 30.690675] option 1-1.3:1.1: GSM modem (1-port) converter detected
[ 30.697428] usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB1
[ 30.705242] option 1-1.3:1.2: GSM modem (1-port) converter detected
[ 30.711995] usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB2
[ 30.719823] option 1-1.3:1.3: GSM modem (1-port) converter detected
[ 30.726569] usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB3
[ 30.971933] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
[ 30.979417] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[ 30.987379] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
[ 30.994575] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 31.058681] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 53.983812] random: crng init done
[ 53.987311] random: 170 urandom warning(s) missed due to ratelimiting
[ 77.560611] 8021q: adding VLAN 0 to HW filter on device eth0
[ 77.591909] br-lan: port 1(eth0.1) entered blocking state
[ 77.597711] br-lan: port 1(eth0.1) entered disabled state
[ 77.603646] device eth0.1 entered promiscuous mode
[ 77.608611] device eth0 entered promiscuous mode
[ 77.644002] br-lan: port 1(eth0.1) entered blocking state
[ 77.649572] br-lan: port 1(eth0.1) entered forwarding state
[ 78.634735] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 93.398078] ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting
[ 93.407526] ieee80211 phy0: rt2800_loft_iq_calibration: Warning - RF RX busy in LOFT IQ calibration
[ 93.731403] ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting
[ 93.740852] ieee80211 phy0: rt2800_loft_iq_calibration: Warning - RF RX busy in LOFT IQ calibration
[ 93.955892] ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting
[ 93.965339] ieee80211 phy0: rt2800_rxiq_calibration: Warning - Timeout waiting for MAC status in RXIQ calibration
[ 94.350088] br-lan: port 2(wlan0) entered blocking state
[ 94.355690] br-lan: port 2(wlan0) entered disabled state
[ 94.361559] device wlan0 entered promiscuous mode
[ 95.103914] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 95.110820] br-lan: port 2(wlan0) entered blocking state
[ 95.116323] br-lan: port 2(wlan0) entered forwarding state
lsusb:
Bus 001 Device 003: ID 1508:1001 Fibocom NL668 Modem Fibocom NL668 Modem
Bus 001 Device 002: ID 05e3:0608 USB2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux 5.10.146 ehci_hcd EHCI Host Controller
opkg list-installed
busybox - 1.35.0-5
ca-bundle - 20211016-1
cgi-io - 2022-08-10-901b0f04-21
dbus - 1.13.18-12
dnsmasq - 2.86-15
dropbear - 2022.82-2
firewall4 - 2022-10-18-7ae5e14b-1
fstools - 2022-06-02-93369be0-2
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2021-08-03-205defb5-2
glib2 - 2.70.5-4
hostapd-common - 2022-01-16-cff80b4f-14.1
iw - 5.16-1
iwinfo - 2022-08-19-0dad3e66-1
jansson4 - 2.13.1-2
jshn - 2022-05-15-d2223ef9-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 5.10.146-1-d18f79e2b2227915f31828113e187930
kmod-cfg80211 - 5.10.146+5.15.58-1-1
kmod-crypto-aead - 5.10.146-1
kmod-crypto-ccm - 5.10.146-1
kmod-crypto-cmac - 5.10.146-1
kmod-crypto-crc32c - 5.10.146-1
kmod-crypto-ctr - 5.10.146-1
kmod-crypto-gcm - 5.10.146-1
kmod-crypto-gf128 - 5.10.146-1
kmod-crypto-ghash - 5.10.146-1
kmod-crypto-hash - 5.10.146-1
kmod-crypto-hmac - 5.10.146-1
kmod-crypto-kpp - 5.10.146-1
kmod-crypto-lib-chacha20 - 5.10.146-1
kmod-crypto-lib-chacha20poly1305 - 5.10.146-1
kmod-crypto-lib-curve25519 - 5.10.146-1
kmod-crypto-lib-poly1305 - 5.10.146-1
kmod-crypto-manager - 5.10.146-1
kmod-crypto-null - 5.10.146-1
kmod-crypto-rng - 5.10.146-1
kmod-crypto-seqiv - 5.10.146-1
kmod-crypto-sha256 - 5.10.146-1
kmod-gpio-button-hotplug - 5.10.146-3
kmod-leds-gpio - 5.10.146-1
kmod-lib-crc-ccitt - 5.10.146-1
kmod-lib-crc32c - 5.10.146-1
kmod-mac80211 - 5.10.146+5.15.58-1-1
kmod-mii - 5.10.146-1
kmod-mmc - 5.10.146-1
kmod-mt76-core - 5.10.146+2022-09-06-d7054646-4
kmod-mt76x02-common - 5.10.146+2022-09-06-d7054646-4
kmod-mt76x2 - 5.10.146+2022-09-06-d7054646-4
kmod-mt76x2-common - 5.10.146+2022-09-06-d7054646-4
kmod-nf-conntrack - 5.10.146-1
kmod-nf-conntrack6 - 5.10.146-1
kmod-nf-flow - 5.10.146-1
kmod-nf-log - 5.10.146-1
kmod-nf-log6 - 5.10.146-1
kmod-nf-nat - 5.10.146-1
kmod-nf-reject - 5.10.146-1
kmod-nf-reject6 - 5.10.146-1
kmod-nfnetlink - 5.10.146-1
kmod-nft-core - 5.10.146-1
kmod-nft-fib - 5.10.146-1
kmod-nft-nat - 5.10.146-1
kmod-nft-offload - 5.10.146-1
kmod-nls-base - 5.10.146-1
kmod-ppp - 5.10.146-1
kmod-pppoe - 5.10.146-1
kmod-pppox - 5.10.146-1
kmod-rt2800-lib - 5.10.146+5.15.58-1-1
kmod-rt2800-mmio - 5.10.146+5.15.58-1-1
kmod-rt2800-soc - 5.10.146+5.15.58-1-1
kmod-rt2x00-lib - 5.10.146+5.15.58-1-1
kmod-rt2x00-mmio - 5.10.146+5.15.58-1-1
kmod-sdhci-mt7620 - 5.10.146-1
kmod-slhc - 5.10.146-1
kmod-udptunnel4 - 5.10.146-1
kmod-udptunnel6 - 5.10.146-1
kmod-usb-core - 5.10.146-1
kmod-usb-ehci - 5.10.146-1
kmod-usb-net - 5.10.146-1
kmod-usb-net-cdc-ether - 5.10.146-1
kmod-usb-net-cdc-mbim - 5.10.146-1
kmod-usb-net-cdc-ncm - 5.10.146-1
kmod-usb-net-qmi-wwan - 5.10.146-1
kmod-usb-ohci - 5.10.146-1
kmod-usb-serial - 5.10.146-1
kmod-usb-serial-option - 5.10.146-1
kmod-usb-serial-wwan - 5.10.146-1
kmod-usb-wdm - 5.10.146-1
kmod-usb2 - 5.10.146-1
kmod-wireguard - 5.10.146-1
libattr - 2.5.1-1
libblobmsg-json20220515 - 2022-05-15-d2223ef9-1
libc - 1.2.3-4
libdbus - 1.13.18-12
libevdev - 1.13.0-1
libexpat - 2.4.9-1
libffi - 3.4.2-2
libgcc1 - 11.2.0-4
libiwinfo-data - 2022-08-19-0dad3e66-1
libiwinfo-lua - 2022-08-19-0dad3e66-1
libiwinfo20210430 - 2022-08-19-0dad3e66-1
libjson-c5 - 0.15-2
libjson-script20220515 - 2022-05-15-d2223ef9-1
liblua5.1.5 - 5.1.5-10
liblucihttp-lua - 2022-07-08-6e68a106-1
liblucihttp0 - 2022-07-08-6e68a106-1
libmbim - 1.26.4-1
libmnl0 - 1.0.5-1
libnftnl11 - 1.2.1-2
libnl-tiny1 - 2021-11-21-8e0555fb-1
libpcre - 8.45-3
libpthread - 1.2.3-4
libqmi - 1.30.6-1
libqrtr-glib - 1.2.2-1
librt - 1.2.3-4
libubox20220515 - 2022-05-15-d2223ef9-1
libubus-lua - 2022-06-01-2bebf93c-1
libubus20220601 - 2022-06-01-2bebf93c-1
libuci-lua - 2021-10-22-f84f49f0-6
libuci20130104 - 2021-10-22-f84f49f0-6
libuclient20201210 - 2021-05-14-6a6011df-1
libucode20220812 - 2022-10-18-00af0650-1
libudev-zero - 1.0.1-1
libusb-1.0-0 - 1.0.24-5
libustream-wolfssl20201210 - 2022-01-16-868fd881-2
libwolfssl5.5.1.ee39414e - 5.5.1-stable-3
logd - 2021-08-03-205defb5-2
lua - 5.1.5-10
luci - git-20.074.84698-ead5e81
luci-app-firewall - git-22.089.67563-7e3c1b4
luci-app-opkg - git-22.273.29004-9f6876b
luci-app-wireguard - git-21.322.66896-8ae208d
luci-base - git-22.304.65171-ec905e6
luci-i18n-wireguard-en - git-22.316.76227-771eb78
luci-lib-base - git-20.232.39649-1f6dc29
luci-lib-ip - git-20.250.76529-62505bd
luci-lib-jsonc - git-22.097.61921-7513345
luci-lib-nixio - git-20.234.06894-c4a4e43
luci-mod-admin-full - git-19.253.48496-3f93650
luci-mod-network - git-22.300.51227-e076071
luci-mod-status - git-22.302.42268-2878b35
luci-mod-system - git-22.264.46172-b6b7da4
luci-proto-ipv6 - git-21.148.48881-79947af
luci-proto-modemmanager - git-21.231.25157-5ff3ef7
luci-proto-ppp - git-21.158.38888-88b9d84
luci-proto-qmi - git-21.231.25157-5ff3ef7
luci-proto-wireguard - git-22.213.40001-18e6040
luci-ssl - git-20.244.36115-e10f954
luci-theme-bootstrap - git-22.288.45147-96ec0cd
modemmanager - 1.18.6-2
mtd - 26
netifd - 2022-08-25-76d2d41b-1
nftables-json - 1.0.2-2.1
odhcp6c - 2022-08-05-7d21e8d8-18
odhcpd-ipv6only - 2022-03-22-860ca900-1
openwrt-keyring - 2022-03-25-62471e69-3
opkg - 2022-02-24-d038e5b6-1
ppp - 2.4.9.git-2021-01-04-3
ppp-mod-pppoe - 2.4.9.git-2021-01-04-3
procd - 2022-06-01-7a009685-1
procd-seccomp - 2022-06-01-7a009685-1
procd-ujail - 2022-06-01-7a009685-1
px5g-wolfssl - 5.1
rpcd - 2022-09-21-8c852b65-1
rpcd-mod-file - 2022-09-21-8c852b65-1
rpcd-mod-iwinfo - 2022-09-21-8c852b65-1
rpcd-mod-luci - 20210614
rpcd-mod-rrdns - 20170710
swconfig - 12
ubox - 2021-08-03-205defb5-2
ubus - 2022-06-01-2bebf93c-1
ubusd - 2022-06-01-2bebf93c-1
uci - 2021-10-22-f84f49f0-6
uclient-fetch - 2021-05-14-6a6011df-1
ucode - 2022-10-18-00af0650-1
ucode-mod-fs - 2022-10-18-00af0650-1
ucode-mod-ubus - 2022-10-18-00af0650-1
ucode-mod-uci - 2022-10-18-00af0650-1
uhttpd - 2022-08-12-e3395cd9-1
uhttpd-mod-ubus - 2022-08-12-e3395cd9-1
umbim - 2022-08-13-146bc77c-1
uqmi - 2022-05-04-56cb2d40-1
urandom-seed - 3
urngd - 2020-01-21-c7f7b6b6-1
usb-modeswitch - 2022-02-24-3c8595a4-1
usbutils - 014-1
usign - 2020-05-23-f1f65026-1
wireguard-tools - 1.0.20210424-3
wireless-regdb - 2022.08.12-1
wpad-basic-wolfssl - 2022-01-16-cff80b4f-14.1
wwan - 2019-04-29-5
zlib - 1.2.11-6
Probably installed packages that aren't needed, but this is the current system.
