System log:
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[964]: exiting on receipt of SIGTERM
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: started, version 2.80test3 cachesize 150
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq-dhcp[1844]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain test
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain onion
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain localhost
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain local
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain invalid
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain bind
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain lan
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: reading /tmp/resolv.conf.auto
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain test
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain onion
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain localhost
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain local
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain invalid
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain bind
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using local addresses only for domain lan
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using nameserver 1.1.1.1#53
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using nameserver 8.8.8.8#53
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: using nameserver fd00::e228:6dff:fedf:7c2f#53
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: read /etc/hosts - 4 addresses
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq-dhcp[1844]: read /etc/ethers - 0 addresses
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: read /etc/hosts - 4 addresses
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq[1844]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sat Oct 20 08:04:40 2018 daemon.info dnsmasq-dhcp[1844]: read /etc/ethers - 0 addresses
Sat Oct 20 08:04:40 2018 daemon.warn odhcpd[1056]: A default route is present but there is no public prefix on br-lan thus we don't announce a default route!
Sat Oct 20 08:04:52 2018 daemon.err uhttpd[1142]: luci: accepted login on /admin/system/reboot for root from 192.168.178.52
kernel log:
[ 0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Thu Aug 16 07:51:15 2018
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is Xiaomi Mi Router 3G
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat 80545e80, node_mem_map 81003000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] random: get_random_bytes called from 0x80549740 with crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu @81210000 s26256 r8192 d22896 u57344
[ 0.000000] pcpu-alloc: s26256 r8192 d22896 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=00033060
[ 0.000000] Readback ErrCtl register=00033060
[ 0.000000] Memory: 253664K/262144K available (4596K kernel code, 239K rwdata, 564K rodata, 220K init, 270K bss, 8480K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007809] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.073972] pid_max: default: 32768 minimum: 301
[ 0.078738] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.085246] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.094003] Hierarchical SRCU implementation.
[ 0.099127] smp: Bringing up secondary CPUs ...
[ 0.104315] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.104324] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.104336] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.104470] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.163867] Synchronize counters for CPU 1: done.
[ 0.198408] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.198418] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.198427] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.198496] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.254969] Synchronize counters for CPU 2: done.
[ 0.285427] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.285435] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.285443] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.285521] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.340150] Synchronize counters for CPU 3: done.
[ 0.370013] smp: Brought up 1 node, 4 CPUs
[ 0.377725] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.387507] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.393796] pinctrl core: initialized pinctrl subsystem
[ 0.399601] NET: Registered protocol family 16
[ 0.409750] Can't analyze schedule() prologue at 80478bc4
[ 0.415106] FPU Affinity set after 11720 emulations
[ 0.415800] pull PCIe RST: RALINK_RSTCTRL = 4000000
[ 0.721045] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.726078] ***** Xtal 40MHz *****
[ 0.729449] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.734557] Port 0 N_FTS = 1b105000
[ 0.738000] Port 1 N_FTS = 1b105000
[ 0.741460] Port 2 N_FTS = 1b102800
[ 1.896774] PCIE2 no card, disable it(RST&CLK)
[ 1.901118] -> 21007f2
[ 1.903537] PCIE0 enabled
[ 1.906144] PCIE1 enabled
[ 1.908728] PCI host bridge /pcie@1e140000 ranges:
[ 1.913491] MEM 0x0000000060000000..0x000000006fffffff
[ 1.918676] IO 0x000000001e160000..0x000000001e16ffff
[ 1.923848] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
[ 1.939700] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.945565] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.951341] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.958429] PCI host bridge to bus 0000:00
[ 1.962452] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 1.969309] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 1.975141] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 1.981897] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.989784] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 1.989824] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 1.989837] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[ 1.989901] pci 0000:00:00.0: supports D1
[ 1.989910] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 1.990152] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 1.990179] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 1.990195] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[ 1.990245] pci 0000:00:01.0: supports D1
[ 1.990254] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 1.990659] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
[ 1.990702] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 1.990829] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.990999] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.991187] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
[ 1.991240] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 1.991286] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 1.991378] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.991555] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 1.991570] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 1.991628] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 1.998182] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.005058] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.011640] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.018530] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.025291] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[ 2.032014] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
[ 2.039204] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[ 2.045927] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[ 2.052684] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
[ 2.059397] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.064345] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.071066] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[ 2.078355] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
[ 2.085490] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.090434] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
[ 2.097156] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff pref]
[ 2.105639] clocksource: Switched to clocksource GIC
[ 2.111941] NET: Registered protocol family 2
[ 2.117084] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.124007] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 2.130418] TCP: Hash tables configured (established 2048 bind 2048)
[ 2.136834] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.142597] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.149070] NET: Registered protocol family 1
[ 2.153389] PCI: CLS 0 bytes, default 32
[ 2.385612] 4 CPUs re-calibrate udelay(lpj = 2924544)
[ 2.391755] Crashlog allocated RAM at address 0x3f00000
[ 2.397132] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 2.410904] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.416718] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.429494] random: fast init done
[ 2.433386] io scheduler noop registered
[ 2.437273] io scheduler deadline registered (default)
[ 2.442926] gpio-export gpio_export: 1 gpio(s) exported
[ 2.448893] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.458778] console [ttyS0] disabled
[ 2.462321] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[ 2.471333] console [ttyS0] enabled
[ 2.478205] bootconsole [early0] disabled
[ 2.486975] cacheinfo: Failed to find cpu0 device node
[ 2.492095] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.498992] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 2.506139] Enable NFI Clock
[ 2.509010] # MTK NAND # : Use HW ECC
[ 2.512669] Device found in MTK table, ID: c8d1, EXT_ID: 809540
[ 2.518580] Support this Device in MTK table! c8d1
[ 2.523528] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
[ 2.530012] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
[ 2.536350] nand: ESMT NAND 128MiB 3,3V 8-bit
[ 2.540686] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.548255] Scanning device for bad blocks
[ 2.696691] 10 fixed-partitions partitions found on MTD device MT7621-NAND
[ 2.703531] Creating 10 MTD partitions on "MT7621-NAND":
[ 2.708842] 0x000000000000-0x000000080000 : "Bootloader"
[ 2.715257] 0x000000080000-0x0000000c0000 : "Config"
[ 2.721261] 0x0000000c0000-0x000000100000 : "Bdata"
[ 2.727164] 0x000000100000-0x000000140000 : "Factory"
[ 2.733223] 0x000000140000-0x000000180000 : "crash"
[ 2.739116] 0x000000180000-0x0000001c0000 : "crash_syslog"
[ 2.745665] 0x0000001c0000-0x000000200000 : "reserved0"
[ 2.751904] 0x000000200000-0x000000600000 : "kernel_stock"
[ 2.758507] 0x000000600000-0x000000a00000 : "kernel"
[ 2.764479] 0x000000a00000-0x000007f80000 : "ubi"
[ 2.771189] [mtk_nand] probe successfully!
[ 2.776046] Signature matched and data read!
[ 2.780294] load_fact_bbt success 1023
[ 2.784699] libphy: Fixed MDIO Bus: probed
[ 2.858202] libphy: mdio: probed
[ 4.261940] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[ 4.268576] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
[ 4.279363] NET: Registered protocol family 10
[ 4.285379] Segment Routing with IPv6
[ 4.289194] NET: Registered protocol family 17
[ 4.293690] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.306606] 8021q: 802.1Q VLAN Support v1.8
[ 4.313706] UBI: auto-attach mtd9
[ 4.317098] ubi0: attaching mtd9
[ 5.427013] ubi0: scanning is finished
[ 5.446901] ubi0: attached mtd9 (name "ubi", size 117 MiB)
[ 5.452377] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.459272] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.466047] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.472974] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
[ 5.478973] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 5.486180] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1483783663
[ 5.495267] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20
[ 5.504497] ubi0: background thread "ubi_bgt0d" started, PID 387
[ 5.506481] block ubiblock0_0: created from ubi0:0(rootfs)
[ 5.506493] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 5.506512] hctosys: unable to open rtc device (rtc0)
[ 5.535227] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 5.542920] Freeing unused kernel memory: 220K
[ 5.547401] This architecture does not have kernel memory protection.
[ 6.068074] init: Console is alive
[ 6.071711] init: - watchdog -
[ 6.636570] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.724936] usbcore: registered new interface driver usbfs
[ 6.730530] usbcore: registered new interface driver hub
[ 6.736002] usbcore: registered new device driver usb
[ 6.749658] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 6.754998] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 6.765846] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[ 6.774326] xhci-mtk 1e1c0000.xhci: irq 19, io mem 0x1e1c0000
[ 6.781059] hub 1-0:1.0: USB hub found
[ 6.784876] hub 1-0:1.0: 2 ports detected
[ 6.789481] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 6.794796] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 6.802284] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 6.808912] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.817823] hub 2-0:1.0: USB hub found
[ 6.821632] hub 2-0:1.0: 1 port detected
[ 6.828431] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.845956] init: - preinit -
[ 7.460421] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[ 7.551038] mtk_soc_eth 1e100000.ethernet: PPE started
[ 7.631332] random: procd: uninitialized urandom read (4 bytes read)
[ 10.771305] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 481
[ 10.845709] UBIFS (ubi0:1): recovery needed
[ 11.042954] UBIFS (ubi0:1): recovery completed
[ 11.047535] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 11.055329] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.065215] UBIFS (ubi0:1): FS size: 112373760 bytes (107 MiB, 885 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[ 11.075821] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 11.082413] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 9F33610E-0600-4DD4-AAB5-1FA23E090EEA, small LPT model
[ 11.099835] mount_root: switching to ubifs overlay
[ 11.135770] urandom-seed: Seeding with /etc/urandom.seed
[ 11.230359] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[ 11.244925] procd: - early -
[ 11.247945] procd: - watchdog -
[ 11.915768] procd: - watchdog -
[ 11.919208] procd: - ubus -
[ 11.981713] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.992918] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.999694] random: ubusd: uninitialized urandom read (4 bytes read)
[ 12.006975] procd: - init -
[ 12.363049] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.373050] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.701731] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 12.709755] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 12.718139] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.060284] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 13.270086] xt_time: kernel timezone is -0000
[ 13.508869] bus=0x1, slot = 0x0, irq=0xff
[ 13.513069] mt7603e 0000:01:00.0: ASIC revision: 76030010
[ 13.521716] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
[ 13.527311] mt7603e 0000:01:00.0: Build Time: 20160107100755
[ 13.565633] firmware init done
[ 13.744695] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.751872] bus=0x2, slot = 0x1, irq=0xff
[ 13.756164] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[ 13.786375] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
[ 13.897852] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
[ 13.903330] mt76x2e 0000:02:00.0: Build: 1
[ 13.907455] mt76x2e 0000:02:00.0: Build Time: 201507311614____
[ 13.935744] mt76x2e 0000:02:00.0: Firmware running!
[ 13.942047] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 13.950874] PPP generic driver version 2.4.2
[ 13.956699] NET: Registered protocol family 24
[ 13.963888] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.550079] urandom_read: 5 callbacks suppressed
[ 14.550093] random: jshn: uninitialized urandom read (4 bytes read)
[ 20.304644] mtk_soc_eth 1e100000.ethernet: PPE started
[ 20.316980] device eth0 entered promiscuous mode
[ 20.323755] br-lan: port 1(eth0.1) entered blocking state
[ 20.329322] br-lan: port 1(eth0.1) entered disabled state
[ 20.335295] device eth0.1 entered promiscuous mode
[ 20.345250] br-lan: port 1(eth0.1) entered blocking state
[ 20.350761] br-lan: port 1(eth0.1) entered forwarding state
[ 20.356882] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 21.086835] random: crng init done
[ 21.356149] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 22.098456] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 22.113118] br-lan: port 2(wlan1) entered blocking state
[ 22.118501] br-lan: port 2(wlan1) entered disabled state
[ 22.124528] device wlan1 entered promiscuous mode
[ 22.129687] br-lan: port 2(wlan1) entered blocking state
[ 22.135059] br-lan: port 2(wlan1) entered forwarding state
[ 22.396208] br-lan: port 2(wlan1) entered disabled state
[ 22.788172] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 22.794824] br-lan: port 2(wlan1) entered blocking state
[ 22.800162] br-lan: port 2(wlan1) entered forwarding state