Can you help me how to do this?
ntfs … relayd, samba, minidlna + many others
opkg update
opkg install … ( my full list )
base-files blkid block-mount blockd busybox cgi-io chat comgt ddns-scripts dnsmasq dropbear e2fsprogs firewall fstools fwtool getrandom hd-idle hostapd-common igmpproxy ip6tables ip6tables-mod-nat iptables iptables-mod-tproxy iw iwinfo jshn jsonfilter kernel kmod-cfg80211 kmod-crypto-crc32c kmod-crypto-hash kmod-eeprom-93cx6 kmod-fs-autofs4 kmod-fs-ext4 kmod-fs-reiserfs kmod-fs-vfat kmod-fuse kmod-gpio-button-hotplug kmod-ip6tables kmod-ipt-conntrack kmod-ipt-core kmod-ipt-ipset kmod-ipt-nat kmod-ipt-nat6 kmod-ipt-offload kmod-ipt-tproxy kmod-leds-gpio kmod-lib-crc-ccitt kmod-lib-crc-itu-t kmod-lib-crc16 kmod-mac80211 kmod-mii kmod-mmc kmod-mt76 kmod-mt76-core kmod-mt7603 kmod-mt76x02-common kmod-mt76x2 kmod-mt76x2-common kmod-nf-conntrack kmod-nf-conntrack-netlink kmod-nf-conntrack6 kmod-nf-flow kmod-nf-ipt kmod-nf-ipt6 kmod-nf-nat kmod-nf-nat6 kmod-nf-reject kmod-nf-reject6 kmod-nfnetlink kmod-nls-base kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-utf8 kmod-ppp kmod-pppoe kmod-pppox kmod-rt2800-lib kmod-rt2800-mmio kmod-rt2800-pci kmod-rt2x00-lib kmod-rt2x00-mmio kmod-rt2x00-pci kmod-scsi-core kmod-slhc kmod-usb-core kmod-usb-ohci kmod-usb-printer kmod-usb-storage kmod-usb-storage-extras kmod-usb-storage-uas kmod-usb-uhci kmod-usb3 libblkid1 libblobmsg-json libbz2-1.0 libc libcomerr0 libexif libext2fs2 libffmpeg-audio-dec libflac libgcc1 libid3tag libip4tc2 libip6tc2 libiwinfo-lua libiwinfo20181126 libjpeg libjson-c4 libjson-script liblua5.1.5 liblucihttp-lua liblucihttp0 libmount1 libnl-tiny libogg0 libpthread librt libsmartcols1 libsqlite3 libss2 libubox20170601 libubus-lua libubus20170705 libuci-lua libuci20130104 libuclient20160123 libuuid1 libvorbis libxtables12 logd lsblk lua luci luci-app-ddns luci-app-firewall luci-app-hd-idle luci-app-minidlna luci-app-opkg luci-app-p910nd luci-app-samba luci-app-travelmate luci-app-upnp luci-base luci-lib-ip luci-lib-ipkg luci-lib-jsonc luci-lib-nixio luci-mod-admin-full luci-mod-network luci-mod-status luci-mod-system luci-proto-3g luci-proto-ipv6 luci-proto-ppp luci-proto-relay luci-theme-bootstrap minidlna miniupnpd mtd netifd ntfs-3g odhcp6c odhcpd-ipv6only openwrt-keyring opkg p910nd ppp ppp-mod-pppoe procd relayd rpcd rpcd-mod-file rpcd-mod-iwinfo rpcd-mod-rrdns rt2800-pci-firmware samba36-server swconfig travelmate ubi-utils ubox ubus ubusd uci uclient-fetch uhttpd uhttpd-mod-ubus urandom-seed urngd usign wireless-regdb wireless-tools wpad zlib
I forced it and now it appears bricked, so there might be more to it. Seems like it's in eternal reboot mode.
1 Like
-> stefs
when you have internet running:
opkg update
opkg install ( the content of the list )
Sorry guy, for me it was only this problem...
Then you have to use the hopefully left the original kernel untouched in partition kernel1 for recovery with a USB stick as described in the wiki page.
If this also doesn't work, you have to solder a serial header and use the serial console of the booloader, to boot OpenWRT initram image from tftp and reflash your device.
To go to putty and log in to router and then do this?
Just type this and type all you say? in once or time from time?
Someone for tips for me?
? 
... 
What is your question?
Reading the wiki is probably the fastest way - there is a lot of information out there..
Searching here will also yield a lot of information:
Thanks but i still dont understand.
When i go to smbd -V i see that i have version 3.6.25
What i should do next?
When i go to /etc/config/samba i get permission denied
When i type opkg list-installed | grep usb i get:
kmod-usb-core - 4.14.151-1
kmod-usb-storage - 4.14.151-1
kmod-usb3 - 4.14.151-1
I do this, and still nothing:
https://openwrt.org/docs/guide-user/storage/usb-drives-quickstart
?
As this is a generic question, you should open a own thread for you problem...
1 Like
If i dont get help here, i think i dont on new theme also, this is the reason why i dont open new theme.
Hello guys,
After installing version 19.07.0 via sysupgrade, I'm trying to install Luci but I got this error:
root@OpenWrt:~# opkg install luci
Installing luci (git-20.010.60094-335692a-1) to root...
Downloading http://downloads.openwrt.org/releases/19.07.0/packages/mipsel_24kc/luci/luci_git-20.010.60094-335692a-1_all.ipk
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for luci:
* libc
* kernel (= 4.14.162-1-2e88863ccdd594fb8e842df3c25842ee)
* libc
* opkg_install_cmd: Cannot install package luci.
Do you know how to fix it ?
Thanks
Luci should already be installed on a stable release.
1 Like
FYI - I have create a new topic for 19.07.x issues with Xiaomi Wifi Router 3G.
Please use the new topic for questions specific to 19.07.x
3 Likes
I will ask my question again, maybe my english is too bad so u dont understand me.
I install 18.06 on my Xiaomi Router 3g. And i want to get Samba 3 for my usb.
But samba not work.
I install samba36-client, samba36-hotplug, samba36-net, samba36-server.
But when i put my usb and go to Mount Point, nothing happens.
I format USB from NTFS to EXFAT, but its the same.
Help?
This topic was automatically closed 20 days after the last reply. New replies are no longer allowed.