Yeah I actually just want it and I am using it [with x-wrt fork] for light duty, Or at least that’s what I think it is. It manages WANs. Failover mode. I don’t know if that falls under your category of light duty. Does it? The rest of the routing gets done by a DL-868l
As long as the bandwidth doesn't exceed 50-60 mbps, sure.
About miwifi mini conversion, if I flash that firmware [into MIR3] will it still be capable of doing failover mwan3 and 5 GHz Wi-Fi client?
You doesn't simply flash the firmware, you need to add an SPI chip and a couple resistor to the board, this is mine, as per this instruction over at 4pda.
Oh god, no. I’m okay then 
I just need to find out why it keeps rebooting every once in a while.
Hi pls help me write wrong
İ have mi router 3 install bandora box and also open wrt but same have a problem how can i revart original rom write mi rom usb and alsonrestar and button. No any solution i have ttl cable pls help me
Is it possible to install OpenWRT or XWRT without soldering serial connection?
Maybe use miwifi repair tool?
You only need SSH access, which can be obtained officially (using miwifi app), or unofficially.
Unofficial SSH access? Do you mean this? https://github.com/acecilia/OpenWRTInvasion
There is no Xiaomi Mi Router 3 listed. Are you talking about other unofficial method?
You can try the URL method (like this one) or OpenWrtInvasion if you don't want to or can not use the official method.
1 Like
Hello. I tried first time to use pandora from ofw to my r3. Everything went fine until I had my router blinking yellow after restarting with pandorabox boot my pc necer connected to 192.168.1.1 and my router just blinks yellow. Is there anything I can do to use pandora or even reverse it and try again
There is a new PR which has been merged: "ramips: Add support for Xiaomi MiWiFi 3A":
1 Like
3A ≠ 3
3 uses MT7620
3A uses MT7628