You're going to have to use the miwifi.bin method from a USB drive to go back to stock. In my case, miwifi.bin only took, once rebooted, and after attempting to flash the kernel through tftp.
is there a support for a pocketwifi connected thru usb slot in xiaomi..
USB WAN i mean!!! or could i connect a smartphone then used a USB TETHERING
is it already supported?
sorry for bad english
FYI
[19928.389297] ieee80211 phy1: rt2800mmio_txdone: Warning - Got TX status for an empty queue 2, dropping
[19933.016304] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
[19933.386521] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
[19934.093494] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced reset
[19934.104210] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
[19934.809702] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
[19935.527499] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
[19936.936748] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
[19937.647618] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
[19940.994250] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[19941.003747] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[19941.013204] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[19941.022645] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
[19941.513796] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
[19942.233110] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 0 DMA timed out, invoke forced resetPlease, I need help
my mistake upgrade via luci system upgrade not chek "keep seting" make my xiomi r3 brick
i have follow same guide from here but not any give my solution,,,
here my log on serial consule
U-Boot 1.1.3 mod Eddie (Feb 24 2018 - 23:47:44)
Board: MediaTek APSoC DRAM: 128 MB
enable ephy clock...done. SSC disabled.
******************************
Software System Reset Occurred
******************************
!!! nand page size = 2048, addr len=4
..============================================
MediaTek U-Boot Version: 5.0.1.0-7E
--------------------------------------------
ASIC 7620_MP (Port5<->None)
DRAM_CONF_FROM: Auto-detection
DRAM_TYPE: DDR2
DRAM component: 1024 Mbits
DRAM bus: 16 bit
Total memory: 128 MBytes
Flash component: NAND Flash
Date:Feb 24 2018 Time:23:47:44
============================================
icache: sets:512, ways:4, linesz:32, total:65536
dcache: sets:256, ways:4, linesz:32, total:32768
#### The CPU freq = 580 MHZ ####
estimate memory size = 128 Mbytes
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Enter boot command line interface.
5: Load system code then write to Flash via USB Storage.
9: Load U-Boot code then write to Flash via TFTP. 0
3: System Boot system code via Flash.
## Checking image at bc600000 ...
Image Name: MIPS LEDE Linux-4.9.49
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1352342 Bytes = 1.3 MB
Load Address: 80000000
Entry Point: 80000000
..................... Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 128
Starting kernel ...
[ 0.000000] Linux version 4.9.49 (robimarko@Builder-temp2) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4851-4072846) ) #0 Mon Sep 11 08:31:23 2017
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is Xiaomi Mi Router R3
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=0000f020
[ 0.000000] Readback ErrCtl register=0000f020
[ 0.000000] Memory: 125404K/131072K available (3141K kernel code, 155K rwdata, 752K rodata, 168K init, 216K bss, 5668K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.007580] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.070084] pid_max: default: 32768 minimum: 301
[ 0.074698] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.081071] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.094795] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.104347] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.110299] pinctrl core: initialized pinctrl subsystem
[ 0.115994] NET: Registered protocol family 16
[ 0.381723] PCI host bridge /pcie@10140000 ranges:
[ 0.386336] MEM 0x0000000020000000..0x000000002fffffff
[ 0.391388] IO 0x0000000010160000..0x000000001016ffff
[ 0.410205] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.415600] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.422006] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.427384] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.433721] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.439098] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.445944] PCI host bridge to bus 0000:00
[ 0.449872] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[ 0.456588] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 0.462287] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.468892] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.477794] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 0.484209] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 0.490925] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[ 0.497529] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[ 0.504532] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[ 0.511145] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[ 0.518242] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[ 0.525250] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.530060] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
[ 0.536661] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
[ 0.543683] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[ 0.549348] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[ 0.558721] clocksource: Switched to clocksource systick
[ 0.565171] NET: Registered protocol family 2
[ 0.570283] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.577010] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.583236] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.589466] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.595089] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.601477] NET: Registered protocol family 1
[ 0.608030] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.614713] Crashlog allocated RAM at address 0x3f00000
[ 0.621105] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.635663] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.641312] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.659720] io scheduler noop registered
[ 0.663466] io scheduler deadline registered (default)
[ 0.668673] ralink-usb-phy usbphy: invalid resource
[ 0.674030] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.681301] console [ttyS0] disabled
[ 0.684754] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.694433] console [ttyS0] enabled
[ 0.694433] console [ttyS0] enabled
[ 0.701466] bootconsole [early0] disabled
[ 0.701466] bootconsole [early0] disabled
[ 0.711412] libphy: Fixed MDIO Bus: probed
[ 0.721479] gsw: setting port4 to ephy mode
[ 0.725799] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 4 link up (100Mbps/Full duplex)
[ 0.735202] mtk_soc_eth 10100000.ethernet: generated random MAC address ae:d5:85:bf:31:f3
[ 0.743642] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 0.750561] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 0.759609] rt2880_wdt 10000120.watchdog: Initialized
[ 0.765895] NET: Registered protocol family 10
[ 0.773606] NET: Registered protocol family 17
[ 0.778204] 8021q: 802.1Q VLAN Support v1.8
[ 0.785261] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 0.792973] Please append a correct "root=" boot option; here are the available partitions:
[ 0.801509] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 0.811147] Rebooting in 1 seconds..this is not my firmware. Here is no reason to brick router, if keep setting is not checked
Try option 2. You'll need a tftp server on your PC. Read my previous posts on this topic.
Reporting
build: NATCAP 3.0.0_build201803222222 Beaver r6547-0a883fe / LuCI Master (git-18.078.78845-a71ef99)
uptime: 1d 7h 59m 56s
issue: 2.4 Ghz AP unusable.
symptom: previously working Android device now quickly loops through: "Authenticating...", "connecting...", "connected", "connected no internet", "disconnected".
workaround: reboot router.
1 Like
yes eddiecz thats not your firmware, my fault not keep setting cheked
raz123
what tool that you use, cuase i using tftp gui not working
please tell me the detail
And another one
Mon Mar 26 09:13:34 2018 kern.err kernel: [27640.059953] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2
Mon Mar 26 09:13:34 2018 kern.err kernel: [27640.059953] Please file bug report to http://rt2x00.serialmonkey.comi think we have same problem that until now i can fix it
can you give me the "root_ulmage" file
I recommend that you try this:
On your USB stick[1], which goes into the router, put miwifi.bin[2].
Then, on the router, select option 2 (TFTP), transfer kernel1.bin[3], which should be hosted on your PC (using app tftp32... put .bin in same folder).
Once the kernel1.bin file is retrieved from the PC by the router, it will try flashing it, which results in some sort of corruption. Upon rebooting your router, press the reset button, and the miwifi.bin on the USB should now be used by the router to reflash itself to stock.
[1] FAT32 partition
[2] http://bigota.miwifi.com/xiaoqiang/rom/r3/miwifi_r3_all_55ac7_2.11.20.bin
please tell me what IP static configuration on your pc
When you use option 2 (TFTP), it asks you to provide three things:
- the router ip (chose something like 192.168.1.2)
- the server (pc) ip (192.168.1.1)
- the file name to retrieve from the server (kernel1.bin)
Make sure that your pc's static IP is set to 192.168.1.1 during this.
thanks raz123
i will try it
Hi,
I just got an account to thank you for your work and making this device a usable piece (it has nice hardware but crappy software).
I'm using ptpt52's rom since January. However, it seems getting more and more unstable with every version. I'm thinking about downgrading. Is that possible?
Wifi is dying regularly, but since last week, the device completely freezes. Have to reboot it 2-3 times a day. Log is filled with:
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.365779] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.375220] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.384661] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.394101] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.403543] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.412984] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.422399] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.431841] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.err kernel: [ 2270.441287] ieee80211 phy1: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Sat Apr 7 11:12:10 2018 kern.warn kernel: [ 2270.456436] ieee80211 phy1: rt2800mmio_txdone: Warning - Got TX status for an empty queue 0, dropping
Sat Apr 7 11:12:11 2018 kern.warn kernel: [ 2270.974313] ieee80211 phy1: rt2800mmio_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset
Sat Apr 7 11:12:11 2018 kern.warn kernel: [ 2271.033582] ieee80211 phy1: rt2800mmio_txdone: Warning - Got TX status for an empty queue 0, dropping
Sat Apr 7 11:12:11 2018 kern.warn kernel: [ 2271.043100] ieee80211 phy1: rt2800mmio_txdone: Warning - Got TX status for an empty queue 2, dropping
Sat Apr 7 11:12:12 2018 kern.warn kernel: [ 2271.116548] ieee80211 phy1: rt2800mmio_txdone: Warning - Got TX status for an empty queue 2, dropping
Sat Apr 7 11:12:12 2018 kern.warn kernel: [ 2271.126030] ieee80211 phy1: rt2800mmio_txdone: Warning - Got TX status for an empty queue 2, dropping
Sat Apr 7 11:12:12 2018 kern.warn kernel: [ 2271.198838] ieee80211 phy1: rt2800mmio_txdone: Warning - Got TX status for an empty queue 2, dropping
Sat Apr 7 11:12:12 2018 kern.warn kernel: [ 2271.343821] ieee80211 phy1: rt2800mmio_txdone: Warning - Got TX status for an empty queue 2, dropping
Tell me, if I can help you somehow.
I have come to the same conclusion and this, after trying all latest available builds, including Padavan. The last stable Lede/openwrt build for me was from @Eddiecz's 1.6 branch.
While I still have a copy of that build, it lacks QoS. I'm thinking that I will inevitably have to compile my own to mimic that branch.
I got a log just before the device crashed. I'm no expert, but it seems to me like a memory problem.
Sun Apr 8 16:23:54 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: disassociated due to inactivity
Sun Apr 8 16:23:55 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sun Apr 8 16:23:56 2018 daemon.notice hostapd: wlan0: AP-STA-DISCONNECTED 3c:15:c2:c4:4a:7e
Sun Apr 8 16:23:56 2018 daemon.info hostapd: wlan0: STA 3c:15:c2:c4:4a:7e IEEE 802.11: disassociated
Sun Apr 8 16:23:57 2018 daemon.info hostapd: wlan0: STA 3c:15:c2:c4:4a:7e IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sun Apr 8 16:23:59 2018 daemon.info hostapd: wlan0: STA 3c:15:c2:c4:4a:7e IEEE 802.11: authenticated
Sun Apr 8 16:23:59 2018 daemon.info hostapd: wlan0: STA 3c:15:c2:c4:4a:7e IEEE 802.11: associated (aid 2)
Sun Apr 8 16:23:59 2018 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 3c:15:c2:c4:4a:7e
Sun Apr 8 16:23:59 2018 daemon.info hostapd: wlan0: STA 3c:15:c2:c4:4a:7e RADIUS: starting accounting session 241B8DCA4BB8E6EB
Sun Apr 8 16:23:59 2018 daemon.info hostapd: wlan0: STA 3c:15:c2:c4:4a:7e WPA: pairwise key handshake completed (RSN)
Sun Apr 8 16:23:59 2018 daemon.info dnsmasq-dhcp[2039]: DHCPREQUEST(br-lan) 192.168.36.151 3c:15:c2:c4:4a:7e
Sun Apr 8 16:23:59 2018 daemon.info dnsmasq-dhcp[2039]: DHCPACK(br-lan) 192.168.36.151 3c:15:c2:c4:4a:7e
Sun Apr 8 16:23:59 2018 daemon.warn odhcpd[1286]: DHCPV6 CONFIRM IA_NA from 000100011b17461c3c15c2c44a7e on br-lan: not on-link fd91:7dce:8099::510/128
Sun Apr 8 16:24:00 2018 daemon.warn odhcpd[1286]: DHCPV6 SOLICIT IA_NA from 000100011b17461c3c15c2c44a7e on br-lan: ok fd91:7dce:8099::510/128
Sun Apr 8 16:24:01 2018 daemon.warn odhcpd[1286]: DHCPV6 REQUEST IA_NA from 000100011b17461c3c15c2c44a7e on br-lan: ok fd91:7dce:8099::510/128
Sun Apr 8 16:28:58 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: disassociated due to inactivity
Sun Apr 8 16:28:59 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sun Apr 8 16:34:02 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: disassociated due to inactivity
Sun Apr 8 16:34:03 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sun Apr 8 16:39:13 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: disassociated due to inactivity
Sun Apr 8 16:39:14 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sun Apr 8 16:44:17 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: disassociated due to inactivity
Sun Apr 8 16:44:19 2018 daemon.info hostapd: wlan1: STA 34:d2:70:1f:c9:63 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Sun Apr 8 16:45:13 2018 kern.warn kernel: [18586.958892] openvpn invoked oom-killer: gfp_mask=0x2420848(GFP_NOFS|__GFP_NOFAIL|__GFP_HARDWALL|__GFP_MOVABLE), nodemask=0, order=0, oom_score_adj=0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18586.972528] CPU: 0 PID: 2023 Comm: openvpn Not tainted 4.9.91 #0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18586.978654] Stack : 8048751a 00000034 00000000 00000001 87dcebc4 8042d367 803d8f9c 000007e7
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18586.987223] 80483660 ffffffff 00000001 00200000 00000001 8004cb24 00000000 00000004
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18586.995782] 00000006 8043f494 803dc934 86e19974 00000000 8007a99c 8048751a 00000088
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.004341] 00000000 00000008 00000000 00000000 00000000 00000000 00000000 00000000
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.012896] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.021440] ...
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.023948] Call Trace:
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.026469] [<8000e220>] show_stack+0x70/0x8c
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.030931] [<800b65b0>] dump_header.isra.5+0x80/0x174
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.036199] [<80080524>] oom_kill_process+0xac/0x404
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.041267] [<80080dc4>] out_of_memory+0x3c4/0x3e8
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.046175] [<80084368>] __alloc_pages_nodemask+0x92c/0x9a8
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.051868] [<8007c958>] pagecache_get_page+0x268/0x354
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.057207] [<800e9668>] __getblk_gfp+0x1a0/0x370
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.062030] [<80117f3c>] squashfs_read_data+0x25c/0x6f0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.067366] [<8011be78>] squashfs_readpage_block+0x458/0x690
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.073158] [<80119c8c>] squashfs_readpage+0x53c/0x6c0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.078417] [<80088a3c>] __do_page_cache_readahead+0x21c/0x274
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.084382] [<8007efc0>] filemap_fault+0x2a0/0x5cc
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.089273] [<8009cfa0>] __do_fault+0x68/0x108
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.093817] [<800a054c>] handle_mm_fault+0x448/0xb2c
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.098893] [<800146c4>] __do_page_fault+0x294/0x4d4
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.103970] [<80009100>] ret_from_exception+0x0/0x10
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.109031] Mem-Info:
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.111369] active_anon:855 inactive_anon:50 isolated_anon:0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.111369] active_file:153 inactive_file:193 isolated_file:0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.111369] unevictable:0 dirty:0 writeback:0 unstable:0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.111369] slab_reclaimable:237 slab_unreclaimable:2736
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.111369] mapped:41 shmem:348 pagetables:85 bounce:0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.111369] free:4096 free_pcp:37 free_cma:0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.143847] Node 0 active_anon:3420kB inactive_anon:200kB active_file:612kB inactive_file:772kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:164kB dirty:0kB writeback:0kB shmem:1392kB writeback_tmp:0kB unstable:0kB pages_scanned:16477 all_unreclaimable? yes
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.168519] Normal free:16384kB min:16384kB low:20480kB high:24576kB active_anon:3420kB inactive_anon:200kB active_file:612kB inactive_file:772kB unevictable:0kB writepending:0kB present:131072kB managed:125208kB mlocked:0kB slab_reclaimable:948kB slab_unreclaimable:10944kB kernel_stack:448kB pagetables:340kB bounce:0kB free_pcp:148kB local_pcp:148kB free_cma:0kB
Sun Apr 8 16:45:18 2018 kern.emerg kernel: lowmem_reserve[]: 0 0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.204703] Normal: 216*4kB (UME) 266*8kB (UME) 275*16kB (UME) 79*32kB (UME) 43*64kB (UME) 21*128kB (UME) 4*256kB (UME) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 16384kB
Sun Apr 8 16:45:18 2018 kern.emerg kernel: 694 total pagecache pages
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.222191] 0 pages in swap cache
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.225570] Swap cache stats: add 0, delete 0, find 0/0
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.230893] Free swap = 0kB
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.233836] Total swap = 0kB
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.236778] 32768 pages RAM
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.239621] 0 pages HighMem/MovableOnly
Sun Apr 8 16:45:18 2018 kern.warn kernel: [18587.243539] 1466 pages reserved
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.246739] [ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.255459] [ 543] 0 543 299 19 3 0 0 0 ubusd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.264258] [ 550] 0 550 225 10 3 0 0 0 askfirst
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.273322] [ 1138] 0 1138 314 40 4 0 0 0 logd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.282037] [ 1155] 0 1155 401 31 3 0 0 0 rpcd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.290739] [ 1248] 0 1248 431 39 3 0 0 0 netifd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.299626] [ 1286] 0 1286 356 28 3 0 0 0 odhcpd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.308512] [ 1505] 0 1505 266 11 3 0 0 0 dropbear
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.317575] [ 1705] 0 1705 391 36 4 0 0 0 uhttpd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.326470] [ 1923] 0 1923 608 69 4 0 0 0 smbd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.335179] [ 1924] 0 1924 614 26 4 0 0 0 nmbd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.343884] [ 1963] 0 1963 359 21 5 0 0 0 blockd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.352770] [ 2023] 0 2023 880 52 3 0 0 0 openvpn
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.361746] [ 2039] 453 2039 669 36 5 0 0 0 dnsmasq
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.370710] [ 2095] 0 2095 498 31 4 0 0 0 hostapd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.379691] [ 2103] 0 2103 228 10 3 0 0 0 ntpclient
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.388848] [ 2154] 0 2154 313 12 3 0 0 0 ntpd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.397557] [ 2247] 0 2247 235 14 5 0 0 0 igmpproxy
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.406709] [ 2921] 0 2921 498 33 5 0 0 0 hostapd
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.415684] [ 5162] 0 5162 283 25 4 0 0 0 dropbear
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.424747] [ 5192] 0 5192 313 11 4 0 0 0 ash
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.433363] [10947] 0 10947 257 13 3 0 0 0 odhcp6c
Sun Apr 8 16:45:18 2018 kern.info kernel: [18587.442339] [25749] 0 25749 337 22 4 0 0 0 logread
Sun Apr 8 16:45:18 2018 kern.err kernel: [18587.451298] Out of memory: Kill process 1923 (smbd) score 2 or sacrifice child
Sun Apr 8 16:45:18 2018 kern.err kernel: [18587.458690] Killed process 1923 (smbd) total-vm:2432kB, anon-rss:112kB, file-rss:4kB, shmem-rss:160kB
Failed to find log object: Not found
Failed to find log object: Not found
Failed to find log object: Not found
Failed to find log object: Not found
Failed to find log object: Not found
Failed to find log object: Not found
Failed to find log object: Not found
Failed to find log object: Not found
Failed to find log object: Not found
Failed to find log object: Not found
root@lede:~# Connection to 192.168.36.1 closed by remote host.
Connection to 192.168.36.1 closed.
Directly after boot:
root@lede:~# ps aux --sort -rss | head -5
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2023 0.0 2.1 3520 2668 ? S 18:13 0:00 /usr/sbin/openvpn --syslog openvpn(vpn0) --status /var/run/openvpn.vpn0.status --cd /var/etc --config openvpn-vpn0.conf
dnsmasq 2035 0.0 1.2 2676 1592 ? S 18:13 0:01 /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c -k -x /var/run/dnsmasq/dnsmasq.cfg01411c.pid
root 1923 0.0 1.0 2432 1336 ? Ss 18:13 0:00 /usr/sbin/smbd -F
root 2939 0.0 1.0 1992 1284 ? Ss 18:13 0:00 /usr/sbin/hostapd -s -P /var/run/wifi-phy0.pid -B /var/run/hostapd-phy0.confroot@lede:~# free -m
total used free shared buffers cached
Mem: 125208 49052 76156 840 5792 17464
-/+ buffers/cache: 25796 99412
Swap: 0 0 03 hours later
ps aux --sort -rss | head -5
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2023 0.0 2.1 3520 2668 ? S 18:13 0:01 /usr/sbin/openvpn --syslog openvpn(vpn0) --status /var/run/openvpn.vpn0.status --cd /var/etc --config openvpn-vpn0.conf
dnsmasq 2035 0.0 1.2 2676 1592 ? S 18:13 0:03 /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c -k -x /var/run/dnsmasq/dnsmasq.cfg01411c.pid
root 1923 0.0 1.0 2432 1336 ? Ss 18:13 0:00 /usr/sbin/smbd -F
root 2939 0.0 1.0 1992 1284 ? Ss 18:13 0:00 /usr/sbin/hostapd -s -P /var/run/wifi-phy0.pid -B /var/run/hostapd-phy0.conf`free -m
total used free shared buffers cached
Mem: 125208 87252 37956 840 5876 19036
-/+ buffers/cache: 62340 62868
Swap: 0 0 0Something is draining memory. Actually, I can watch memory being eaten up in top while no program is using it? confused
Best fw openwrt
https://drive.google.com/file/d/1n6QvHtrl4fPB1iImkFkcdvHtj3d_tM0k/view?usp=drivesdk
After installation, update to the following command:
opkg update
opkg list-upgradable | cut -f 1 -d ' ' | xargs opkg upgrade