Xiaomi AX3600: ath11k firmware crash - qcom-q6v5-wcss-pil cd00000.q6v5_wcss: fatal error received:

Isn't the 17 because of my config file (see above)?

Ah, yes it is. Sorry... didn't see that. :+1:

I have lately also had longer-than-earlier uptimes with DL-WRX36, even with multiple SSIDs enabled.

I wonder if some hostapd / mac80211 / nl80211 / whatever change has magically removed the error. E.g. mac80211: ath11k: sync with ath-next

... and still crashed after 5 days.
I hope a new firmware brings a solution.

1 Like

Mine crashes in the first 24 hours with recent snapshots. I'm again back to r23845. I can get the crashes in shorter intervals by letting steam download large games. Interestingly, the "steam" computer is connected via LAN cable and the Openwrt device acts as a gateway.

I use the following cron script (runs every 5 minutes) which reboots when the firmware error occurs:

#!/bin/sh
/sbin/logread -l 100 | /bin/grep -n "failed to send"
if [ $? -eq 0 ]; then
    /sbin/reboot
fi

I have now installed R24328 with the IRQ settings script...

1 Like

Until now not crashing...(there was another network problem)

1 Like

Does it work more stable going back to r23845?

I had no crashes since more than 6 days.

I am freshly trying on r24403 with the irq set affinity script now.

So far all good. About 1d uptime and still 145 mb ram free where I had 40 or less in the past without running irqbalance script.

Looks still good...

Where can I get this page @uweklatt
Still fine since running irqbalance on startup, even though I scheduled a daily reboot.

@Catfriend1 The graph is part of luci-app-statistics.

1 Like

Normal LuCI statistics, if you have that installed.

Memory consumption varies according to SSIDs enabled. As I have been testing various wifi 802.11r configs, there is lots of variation in the last few weeks in my own DL-WRX36...

Ps. LuCI now offers the possibility to hide "free", which amplifies the actual memory consumption.

1 Like

fd90f5fc-fec5-4f69-bcb3-42d17ca2265d

My wifi, since this morning, dies too.
Same crash...

Sat Nov 25 09:58:36 2023 daemon.info hostapd: wifi.2: STA 74:c6:3b:**:**:** IEEE 802.11: authenticated
Sat Nov 25 09:58:36 2023 daemon.notice hostapd: wifi.2: AP-STA-DISCONNECTED 74:c6:3b:**:**:**
Sat Nov 25 09:58:36 2023 daemon.err collectd[2717]: Sleeping only 2s because the next interval is 163412.286 seconds in the past!
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] qcom-q6v5-wcss-pil cd00000.q6v5_wcss: fatal error received:
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] QC Image Version: QC_IMAGE_VERSION_STRING=WLAN.HK.2.9.0.1-01890-QCAHKSWPL_SILICONZ-1
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] Image Variant : IMAGE_VARIANT_STRING=8074.wlanfw.eval_v2Q
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843]
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] wal_peer_control.c:2904 Assertion is_graceful_to_handle failedparam0 :zero, param1 :zero, param2 :zero.
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] Thread ID      : 0x00000060  Thread name    : WLAN RT1  Process ID     : 0
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] Register:
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] SP : 0x4bfd5a48
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] FP : 0x4bfd5a50
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] PC : 0x4b1080c4
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] SSR : 0x00000008
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] BADVA : 0x00020000
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] LR : 0x4b107860
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843]
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] Stack Dump
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] from : 0x4bfd5a48
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843] to   : 0x4bfd62a8
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.554843]
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.603967] remoteproc remoteproc0: crash detected in cd00000.q6v5_wcss: type fatal error
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.626166] remoteproc remoteproc0: handling crash #1 in cd00000.q6v5_wcss
Sat Nov 25 09:58:36 2023 kern.err kernel: [   46.634308] remoteproc remoteproc0: recovering cd00000.q6v5_wcss
Sat Nov 25 09:58:36 2023 kern.info kernel: [   46.666976] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss
Sat Nov 25 09:58:36 2023 kern.warn kernel: [   46.680552] ath11k c000000.wifi: failed to transmit frame -108
Sat Nov 25 09:58:36 2023 kern.warn kernel: [   46.681334] ath11k c000000.wifi: failed to transmit frame -108
Sat Nov 25 09:58:37 2023 kern.warn kernel: [   46.972704] ath11k c000000.wifi: failed to find peer 74:c6:3b:**:**:** on vdev 3 after creation

Do you use irqbalance on startup?

Uptime with irqbalance script is now more than 19 days.

1 Like

After 24 days the AX3600 rebooted with the auto reboot script after firmware error.